TRAININGCATALOG

TABLE OF CONTENTS Introduction + Framework.. Training Programs Contact Information 6 12 25

INTRODUCTION

FAA 14 CFR PART 145US Federal Aviaiton Authority and Repair Station RequirementsEASA PART 145European Union Aviation Safety Agency – Maintenance Organization ApprovalsSPECIALISED CAPABILITESAligns with Non-Destructive Testing (NDT) qualifications and procedures.PROXIt supports compliance with applicable authority requirementsMANUFACTURER DATAAircraft and Component Maintenance DocumentationUAE General Civil Aviation Authority – Continuing AirworthinessGCAA CAR 145Introduction + FrameworkTraining is central to safe, compliant, and high- quality aviation maintenance at Lufthansa Technik Middle East (LTME). Our training framework ensures that all maintenance personnel are qualified, authorized, and competent to perform tasks in accordance with applicable regulations, manufacturer requirements, and LTME standards. AUTHORIZATIONS & REGULATORY LANDSCAPEAUTHORIZATIONS & REGULATORY LANDSCAPE OUR COMMITMENTOUR COMMITMENTAll training is delivered in accordance with regulatory requirements, manufacturer standards, and LTME procedures to ensure competency, compliance, and operational safety. This document provides an overview of the training system, regulatory basis, and delivery principles that underpin our commitment to safety, quality, and continuous improvement. 6

FOR OUR PEOPLEFOR OUR PEOPLEFOR LTMEFOR LTMEDELIVERY METHODOLOGIESDELIVERY METHODOLOGIESREQUEST FOR TRAINING (IQM.5661903)REQUEST FOR TRAINING (IQM.5661903)Deepen technical knowledge, manual precision, and procedural compliance. Maintain active company approvals, certifications, and Part-66 currency. Stay aligned with OEM updates, regulatory changes, and digital tools. Enhance hazard identification, error prevention, and safety protocol adherence. Practice via scenario case studies, bench exercises, and troubleshooting drills. Keep auditable training histories within the corporate learning platform.Reinforce maintenance capability across engine, aerostream, component, and line maintenance environments. Sustain compliance across EASA, FAA, and GCAA oversight audits. Address operational bottlenecks and competency gaps identified through internal quality surveillance. Foster an active Just Culture environment dedicated to continuous technical improvement and zero rework.Training delivery is adapted to technical and operational requirements: Internal Workshop Sessions: Hands-on instruction conducted directly within our facility by certified LTME qualified trainers. Approved External Training: Specialized curriculum provided in partnership with recognized training providers.Why Training MattersTraining needs can arise from many areas, including individual development goals, operational requirements, competence assessments, regulatory changes, new responsibilities, audit findings, and new equipment or processes. To address these needs, LTME uses the Request for Training process (IQM.5661903). It ensures training requirements are identified, reviewed, approved, delivered, and evaluated consistently, with all training records properly maintained for internal and external training sessions. Employees are supported at every step, from identifying training needs and exploring options to coordinating participants and arranging sessions.Interactive Practical Learning: Sessions incorporate real-world case studies, technical quizzes, and practical exercises through Prox that translate regulatory documentation into daily practice. Web Based Training: Grow your skills with web- based training on ProX. Select your target group to view role-relevant training content. 7

TRAINING PROGRAMS

Course ID TRA-500-043 Issue Date 22-Jan-2024 Prerequisites Not Applicable Duration 8 hours for Inspectors (B,C,D,E) 5 Hours for All OtherStaff. Validity 2 Years Author of Training DXB UMQ Lufthansa Number of Participants Recommended: 20Target Group All 145 Staff Type of Training Theoretical Training Practical Training / Practical Exercise Training Material Documents, and ProX Examination Not Applicable Pass Mark Not ApplicableINITIAL + RECURRENT/CONTINUATION FAA Regulations Training 10

Course ID TRA-500-008 Issue Date 2-March-2020 Prerequisites Not Applicable Duration 2 Days Validity Not Applicable Author of Training DXB UMQ Lufthansa Number of Participants Recommended: 15Target Group Maintenance Organizations Staff Type of Training Theoretical Training Training Material Presentation Slides Examination Not Applicable Pass Mark Not ApplicableCAR 145 Training INITIAL 11

INITIAL + RECURRENT/CONTINUATIONCourse ID TRA-500-006 Issue Date 23-Oct-2023 Prerequisites Not Applicable Duration 1 Day (8 Hours) Validity 2 years Author of Training DXB UMQ Lufthansa Number of Participants Recommended: 15Target Group DXB UM (All Personnel) Type of Training Theoretical Training Practical Training /Practical Exercise Training Material In Person Presentation Slides, Experiences, Recent Events and Student Interactions. Examination Not Applicable Pass Mark Have to be present for the entire class Safety Training & Human Factors Training 12

Course ID TRA-500-004 Issue Date 29-May-2023 Prerequisites Not Applicable Duration 2 Hours Validity 2 years Author of Training DXB UMQ Lufthansa Number of Participants Recommended: 15Target Group DXB UM (All Personnel) Type of Training Theoretical Training Practical Training/Practical Exercise Training Material Occupational Safety Presentation Slides Examination Not Applicable Pass Mark Not ApplicableOccupational Health & Safety Training INITIAL + RECURRENT/CONTINUATION 13

Course ID TRA-500-031 Issue Date 11-May-2023 Prerequisites Nomination from Chief Operating Officer/ OPS Manager ARC Duration 1 Hour 10 minutes Validity 2 Years Author of Training DXB UMQ Lufthansa Number of Participants Recommended: 5Target Group DXB UM23 – Certifying Staff (Potential) Type of Training Theoretical Training Practical Training / Practical Exercise Training Material Presentation Slides Examination Written Assessment, Interview with the Examination Committee Pass Mark Correctable to 100%Certifying Staff/ Release to Service Assessment Course INITIAL + RECURRENT/CONTINUATION 14

Course ID TRA-500-026 Issue Date 28-Sep-2022 Prerequisites Not Applicable Duration 2 Hours Validity 2 Years Author of Training DXB UMQ Lufthansa Number of Participants Recommended: 10Target Group DXB UM23 - Maintenance Personnel Type of Training Theoretical Training Training Material Presentation Slides Examination Not Applicable Pass Mark Not ApplicableProcedure and Technology Training INITIAL + RECURRENT/CONTINUATION 15

Course ID TRA-500-042 Issue Date 17-Jan-2024 Prerequisites Not Applicable Duration 1.5 Hours Validity 2 Years Author of Training Maria Cruz Number of Participants Recommended: 10Target Group DXB UM24 Planning Personnel Type of Training Theoretical Training Training Material Presentation Slides Examination Not Applicable Pass Mark Not ApplicableProcedure and Technology Training – Material Planners INITIAL + RECURRENT/CONTINUATION 16

Course ID TRA-500-041 Issue Date 04-Jan-2024 Prerequisites Not Applicable Duration 2 Hours Validity 2 Years Author of Training Faraz Qureshi Number of Participants Recommended: 5Target Group DXB UM24 Material Inspector Type of Training Theoretical Training Training Material Presentation Slides Examination Not Applicable Pass Mark Not ApplicableProcedure and Technology Training – Material Inspectors INITIAL + RECURRENT/CONTINUATION 17

Course ID TRA-500-035 Issue Date 11-May-2023 Prerequisites Nominated by Direct Manager (LTME) Duration 2 Hours Validity 2 years Author of Training DXB UMQ Lufthansa Number of Participants Recommended: 10Target Group Material Inspectors, Certifying Staff, Material Planners, Storekeepers, and Procurement Specialist Type of Training Theoretical Training Practical Training / Practical Exercise Training Material Presentation Slides Examination Not ApplicableSuspected Unapproved Parts Training INITIAL + RECURRENT/CONTINUATION 18

Course ID TRA-500-040 Issue Date 28-Nov-2023 Prerequisites Recommended by T/E Responsible Team Leader Duration 7 Hours Validity Not Applicable Author of Training DXB UMQ Lufthansa Number of Participants Recommended: 10Target Group T/E Responsible and Technical Storekeeper Type of Training Theoretical Training Practical Training / Practical Exercise Training Material Presentation Slides Examination Written Assessment/ Practical Assessment Pass Mark 75 %Tools/ Equipment and Stores Inspection Training INITIAL 19

Course ID TRA-500-003 Issue Date 20-Dec-2020 Prerequisites Qualified as SF1/SF2 Mechanic Duration 1 Hour 30 minutes Validity Not Applicable Author of Training DXB UMQ Lufthansa Number of Participants Recommended: 15Target Group DXB UM23 - SF2 Mechanics Type of Training Theoretical Training Training Material Presentation Slides Examination Not Applicable Pass Mark Not ApplicableIndependent Inspection Instruction INITIAL 20

Course ID TRA-500-014 Issue Date 04-Feb-2022 Prerequisites Employees who have no medical condition that might compromise safety during the operation Duration 2 Hours Validity 1 Year Author of Training DXB UM23 Lufthansa Number of Participants Recommended: Not ApplicableTarget Group Employees who are involved with Crane operation. Type of Training Theoretical Training Practical Training/ Practical Exercise Training Material Presentation Slides Examination Theory Pass Mark 75 %Crane Operation Training INITIAL + RECURRENT/CONTINUATION 21

Course ID TRA-500-005 Issue Date 12-Jan-2021 Prerequisites Not Applicable Duration 5 Hours Validity Not Applicable Author of Training DXB UMQ/UM23 Lufthansa Number of Participants Recommended: 10Target Group DXB UM23 - SF2 Mechanics Type of Training Theoretical Training Training Material Presentation Slides Examination Not ApplicableAircraft Studies Fundamentals Training INITIAL 22

Course ID TRA-500-049 Issue Date 09-Apr-2026 Prerequisites Not Applicable Duration 6 Hours Validity Not Applicable Author of Training DXB UMQ Lufthansa Number of Participants Maximum: 12Target Group Procurement Specialist, Material Planner, Material Inspectors, PEP Planner and Engineer, Shop Specialist Level 2 (SF2) Type of Training Theoretical Training Practical Training / Practical Exercise Training Material Presentation Slides/ Case Study Examination Not Applicable Pass Mark Not ApplicableSub - Contracting Training and Awareness INITIAL 23

24

qehs.ltme@lht.dlh.de For More Information CONTACT US! +971 4 802 7907 Office: 1, 2, 3, 4, 5 Building Name: 1 - Warehouse: 1, 2, 3, 4, 5 Area Name: Aerospace Supply Chain - Aviation District Dubai, UAE PO Box: 293511 25