APPLIED COMMUNITYAPPLIED COMMUNITY HEALTH EDUCATIONHEALTH EDUCATION BY Dr. Srinivas Babu Kathi

© SIMPATHY 2026 Augmented Drug Store and Business Management all rights reserved All rights reserved by Publisher. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior permission of the author. Although every precaution has been taken to verify the accuracy of the information contained herein, the author and publisher assume no responsibility for any errors or omissions. No liability is assumed for damages that may result from the use of information contained within Written by ©Dr. Srinivas Babu Kathi, 2026 ISBN: 978-81-687510-4-0 Price: 400/- Typographic Design: Ratna Bhaduri Distributed by: Simpathy, Amazon, Flipkart Design & composed by: Nisha, Studio creatives, Laxmi Nagar, Delhi Enquiry on: sihppsdelhi@gmail.com, editor@simpathy.org, +91 9968009198 Published by: SIMPATHY INSTITUTE OF HOMOEOPATHIC PHARMACY AND HOSPITAL C-79/6, Om Nagar, Badarpur, New Delhi-110044 S I M P A T H Y

BY Dr. Srinivas Babu Kathi BHMS., M.Sc,(Ee) Md (Hom)., Dtdm., Ph D In Homoeopathy Principal : Hamsa Homoeopathic Medical College and Research Professor & PG Guide, Department of Homoeopathic Pharmacy S I M P A T H YAPPLIED COMMUNITY HEALTH EDUCATION 3Applied Community Health Education

It gives me immense pleasure to write forward for this book i.e “Community Health Education,” thoughtfully prepared to fulfil the academic requirements of students and professionals in the fields of Homoeopathy and Community Health. The book provides a systematic and comprehensive understanding of the essential principles of community health, preventive medicine, epidemiology, environmental sanitation, nutrition, communicable and non-communicable diseases, maternal and child health, first aid, and health education. Community health is an integral part of healthcare, as the health and well- being of individuals are closely connected with the health of the community in which they live. In an era of rapidly changing health challenges, increasing lifestyle-related diseases, and emerging public health concerns, healthcare professionals have an important responsibility to promote health awareness, prevent disease, and encourage healthy practices among individuals and communities. This book has been designed in a simple, clear, and student-friendly manner to facilitate effective learning and understanding. Special emphasis has been placed on the practical application of community health principles, enabling students to appreciate their role in health promotion, disease prevention, patient counselling, community participation, and public health education. Particular attention has also been given to the responsibilities of students and professionals in community healthcare. By developing appropriate knowledge and communication skills, they can contribute meaningfully to health education, awareness programmes, preventive measures, and the promotion of healthy living practices. The contents have been arranged systematically and in accordance with academic requirements, making the book useful for classroom teaching, Forward 4Applied Community Health Education

practical learning, examination preparation, and reference purposes. It is hoped that the book will serve as a valuable resource for students, teachers, researchers, pharmacists, and healthcare professionals who wish to strengthen their understanding of community health education. I sincerely hope that this book will inspire learners to appreciate the importance of preventive and promotive healthcare and to develop a greater sense of responsibility towards the health and well-being of society. I congratulate to Dr. Srinivas Babu Kathi and his team for the dedication and scholarly effort invested in preparing this comprehensive volume. I am confident that this work will make a meaningful contribution to health education and will remain a valuable reference for years to come. Dr. R. Kant Homoeopathic Educationist, Author & Research 5Applied Community Health Education

It gives me immense pleasure to present this book on “Community Health Education”, which has been carefully prepared to meet the academic needs of students and professionals in the field of Homoeopathy and Community Health. This book is designed to provide a clear understanding of the fundamental concepts of community health, preventive medicine, epidemiology, sanitation, nutrition, communicable and non-communicable diseases, maternal and child health, first aid, and the role of homoeopathic pharmacists in community healthcare. Health education plays a crucial role in promoting awareness, disease prevention, and the overall well-being of society. With changing health challenges and increasing public health concerns, there is a growing need for healthcare professionals to understand the principles of community health and actively participate in public welfare. This book aims to simplify these concepts in an easy-to-understand and student-friendly manner. Special emphasis has been given to practical and theoretical aspects relevant to homoeopathic pharmacy students, enabling them to understand their responsibilities in health education, patient counseling, disease prevention, and community participation. The contents have been arranged systematically according to the syllabus to make learning effective and comprehensive. I sincerely hope this book will serve as a valuable guide for students, teachers, researchers, and practitioners in enhancing their knowledge and understanding of community health education. Constructive suggestions for further improvement of this work will always be welcomed. Constructive suggestions from teachers, students, researchers, and readers will always be welcomed and appreciated, as they will help further enrich and refine future editions of this book. Prof. Dr. Srinivas Babu Kathi PREFACE 6Applied Community Health Education

Prof. Dr. Sn Babu Kathi is an accomplished academician, clinician, researcher, and author in the field of Homoeopathy with more than 25 years of clinical experience and 20 years of teaching experience. He is presently serving as a Principal and Professor in the Department of Homoeopathic Pharmacy at Hamsa Homeopathy Medical College Hospital & Research Centre, Siddipet District, Telangana State, affiliated with Kaloji Narayana Rao University of Health Sciences, Telangana. Dr. Kathi completed his BHMS from JSPS Govt. Homoeopathic Medical College, Hyderabad. Dr. NTR University of Health Sciences in 1999, followed by an M.Sc. in Ecology and Environmental Sciences in 2003 from Sikkim Manipal University/IIEE New Delhi. He earned his MD in Homoeopathy (Organon of Medicine) in 2009 from JSPS Govt. Homoeopathic Medical College, Hyderabad. Dr. NTR University of Health Sciences in 2009. and further strengthened his expertise with a Diploma in Thyroid and Diabetes Mellitus Management (DTDM) in 2024. He Completed his PhD in Homoeopathy from Tantia University, Rajasthan in 2026. with a strong focus on advancing homoeopathic medical education and research. He has made remarkable contributions to homoeopathic education, research, and community health services. His teaching areas include Homoeopathic Pharmacy, Organon of Medicine, Community Medicine, Pharmacology and Clinical Medicine. He has serving as a Board of Studies Member, Moderator. University Examiner (Internal & External), Medical Superintendent, and Inspection Committee Member for AYUSH and Homoeopathic institutions. As an active researcher, Dr. Kathi has worked as a Project Manager and Principal Investigator in several research projects, including studies on Type II Diabetes Mellitus, Anemia among Adolescent Girls, Nutritional Assessment, Conjunctivitis Prevention, and Hypertension management using Allium sativum. His dedication to research and evidence-based homoeopathy has resulted in the publication of numerous academic and clinical research papers in reputed national and international journals. Dr. Kathi is also associated with several scholarly and academic activities as a Editorial Board Member, Reviewer for reputed journals, including research and medical publications. He contributed as an author to the revised editions of the ABOUT THE AUTHOR 7Applied Community Health Education

DD Banerjee Textbook of Homoeopathic Pharmacy, reflecting his commitment to academic excellence and professional advancement in Homoeopathy. Apart from academics and research, he actively participated in community health education, NSS activities, health camps, patient counseling, and preventive healthcare services, contributing significantly to public health awareness and holistic healthcare. With an unwavering commitment to teaching, research, and patient care, Prof. Dr. Sn Babu Kathi continues to inspire students, practitioners, and researchers through his academic leadership, scholarly contributions, and dedication to the advancement of Homoeopathy. 8Applied Community Health Education

Foreword ........................................................................................................... 03 Preface ............................................................................................................... 04 About the Author ............................................................................................... 07 CHAPTER 1 Introduction To Community Health ........................................................16 1.1 Definition and Concept of Community Health ...........................................................................17 1.2 Objectives and Scope of Community Health Education ..................................................20 1.3 Determinants of Health ......................................................................................................................................23 1.4 Levels of Health Care ..........................................................................................................................................26 1.5 Role of Health Care Professionals in Community Health ..............................................28 1.6 Role of Community Health in Homoeopathy ..............................................................................36 1.7 Difference between community health and public health ...............................................41 CHAPTER 2 Principles And Methods Of Health Education .......................................43 2.1 Definition and Importance of Health Education ........................................................................44 2.2 Principles of Health Education ...................................................................................................................49 2.3 Methods of Health Education .......................................................................................................................50 2.4 Audio-Visual Aids in Health Education .............................................................................................56 2.5 Planning and Evaluation of Health Education Programs .................................................58 2.6 Description of public health laws and administration in India ...................................62 Contents 9Applied Community Health Education

CHAPTER 3 Nutrition And Health......................................................................................67 3.1 Nutrition (Protein, Fat, Carbohydrate, vitamins, minerals, etc.) .................. 68 3.2 Classification of food ................................................................................... 93 3.3 Balanced Diet ............................................................................................... 95 3.4 Nutritional Requirements at Different Stages of Life .................................. 98 3.5 Common Nutritional Deficiency Diseases ................................................. 105 3.6 Causes, types and Prevention of Malnutrition ........................................... 112 3.7 Food Adulteration and Food Safety ........................................................... 118 CHAPTER 4 Environmental Health And Sanitation ......................................................127 4.1 Water Supply, Purification, water pollution and water borne diseases. ..... 129 4.2 Air Pollution and Its Effects on Health ...................................................... 139 4.3 Disposal of Waste and Sewage .................................................................. 143 4.4 Housing and Health .................................................................................... 149 4.5 Control of Vectors (Mosquito, Flies, Rodents) .......................................... 152 4.6 Food hygiene and sanitation ...................................................................... 155 CHAPTER 5 Communicable Diseases ...............................................................................160 5.1 Definition and Classification ...................................................................... 161 5.2 Modes of Transmission .............................................................................. 163 5.3 Prevention and Control of Communicable Diseases ................................. 165 10Applied Community Health Education

CHAPTER 6 Non-Communicable Diseases ......................................................................201 6.1 Introduction to Non-Communicable Diseases definition and causes ........ 202 6.2 Risk Factors, Prevention and control ......................................................... 208 6.3 Common Non-Communicable Diseases: ................................................... 212 CHAPTER 7 Maternal And Child Health ........................................................................233 7.1 Maternal Health Care ................................................................................. 235 7.2 Child Health Care ...................................................................................... 254 7.3 Immunization Programs ............................................................................. 268 7.4 Family Welfare and Family Planning ........................................................ 276 CHAPTER 8 Personal Hygiene And Mental Health .......................................................287 8.1 Personal Hygiene ....................................................................................... 288 8.2 Oral Health ................................................................................................. 307 8.3 Eye and Ear Care ....................................................................................... 316 8.4 Mental Health and Stress Management ..................................................... 322 8.5 Substance Abuse and Its Prevention .......................................................... 330 CHAPTER 9 Health Programmes In India ......................................................................334 9.1 Introduction to National Health Programs ................................................. 335 9.2 National Tuberculosis Elimination Program (Ntep) .................................. 336 9.3 National Vector Borne Disease Control Program ...................................... 339 11Applied Community Health Education

9.4 National AIDS Control Program ................................................................ 341 9.5 National Immunization Program ................................................................ 344 CHAPTER 10 Primary Health Care And Community Participation ............................349 10.1 Concept Of Primary Health Care ............................................................. 350 10.2 Principles Of Primary Health Care .......................................................... 352 10.3 Role Of Primary Health Care ................................................................... 356 10.4 Community Participation ......................................................................... 358 10.5 Role Of Pharmacist In Community Participation .................................... 361 CHAPTER 11 Health And Disease .......................................................................................366 11.1 Definition of health (WHO concept) ........................................................ 367 11.2 Dimensions of health: .............................................................................. 367 11.3 Homoeopathy Concept of disease ............................................................ 370 11.4 Natural history of disease ......................................................................... 371 11.5 Spectrum of health and disease ................................................................ 377 11.6 Factors affecting health ............................................................................ 380 11.7 Concept of prevention of diseases and disease agents ............................. 383 CHAPTER 12 Preventive Medicine......................................................................................391 12.1 Concept Of Preventive Medicine ............................................................. 392 12.2 Levels of prevention ................................................................................ 393 12Applied Community Health Education

12.3 Disinfection and disinfectants .................................................................. 400 12.4 Role of homoeopathic pharmacist in prevention of disease .................... 409 CHAPTER 13 Sterilization ....................................................................................................414 13.1 Definition and Concept of sterilization ................................................... 415 13.2 Process of sterilization with moist and dry heat ...................................... 417 13.3 Process of sterilization by radiation (Gaseous) ........................................ 420 CHAPTER 14 Epidemiology (Basic Concepts) ..................................................................422 14.1 Definition And Scope Of Epidemiology .................................................. 423 14.2 Methods And Uses Of Epidemiology ...................................................... 424 14.3 Epidemiological Triad .............................................................................. 427 14.4 Role Of Epidemiology In Preventive Medicine ....................................... 430 CHAPTER 15 Population Control........................................................................................432 15.1 Population And Health ............................................................................. 433 15.2 Population Growth ................................................................................... 434 15.3 Population Density And Distribution ....................................................... 437 15.4 Demographic Transition And Health ........................................................ 440 15.5 Population Change And Health Services ................................................. 444 15.6 Population Data And Health Planning ..................................................... 447 15.7 Methods Of Population Control ............................................................... 452 13Applied Community Health Education

CHAPTER 16 First Aid ..........................................................................................................455 16.1 Shock ........................................................................................................ 456 16.2 Snake Bite ................................................................................................ 458 16.3 Burns ........................................................................................................ 462 16.4 Poisining .................................................................................................. 464 16.5 Fracture .................................................................................................... 468 16.6 Resuscitation Method ............................................................................... 470 16.7 Management Of Minor Surgery And Dressing ........................................ 473 16.8 Role of homoeopathic Medicines in first ai. ............................................ 479 CHAPTER 17 Role Of Homoeopathic Pharmacist In Community Health ............ 483 17.1 Role Of Homoeopathic Pharmacist ......................................................... 484 17.2 Participation in health camps ................................................................... 489 17.3 Drug dispensing and patient counseling .................................................. 491 17.4 Storage and distribution of homoeopathic medicines .............................. 493 17.5 Record keeping and reporting .................................................................. 495 Model Record Keeping And Reporting............................................. 497 Examples .............................................................................................. 499 Bibliography ........................................................................................ 501 14Applied Community Health Education

CHAPTER -1 Introduction To Community Health

Health is not solely the responsibility of doctors, hospitals, or social services; rather, it is fundamentally an issue of social justice. Across cultures, health is a universal theme, and communities develop their own concepts of health shaped by cultural beliefs and practices. One of the earliest definitions describes health as the “absence of disease.” In several traditions, however, health is viewed more broadly as a state of harmony—being at peace with oneself, the community, the divine, and the cosmos. Ancient Indian and Greek systems similarly emphasized balance, attributing disease to disturbances in bodily equilibrium, often described as imbalance of humors. In recent decades, there has been renewed recognition of health as a fundamental human right and a bal social objective. Health is now understood as essential for fulfilling basic human needs and improving quality of life, and it should be attainable by all individuals through equitable social and environmental conditions. 1.1 DEFINITION AND CONCEPT OF COMMUNITY HEALTH DEFINITION The widely accepted definition of health is that given by the World Health Organization (1948) in the preamble to its constitution, which is as follows: “Health is a state of complete physical, mental and social well-being and not merely on absence of disease or infirmity”. This definition highlights that health is not just freedom from illness but a state of overall well-being. WHO further explains that health is “a resource for everyday life, not the object of living,” emphasizing that it is a positive concept involving social and personal resources along with physical capabilities. INTRODUCTION TO COMMUNITY HEALTH 1CHAPTER 16Applied Community Health Education

Operational Definition of Health: The WHO definition of health is not an “operational” definition. i.e., it does not lend itself to direct measurement. In this definition, the concept of health is viewed as being of two orders, In a broad sense, health can be seen as “condition or quality of the human organism expressing the adequate functioning of the organism in given conditions, genetic or environmental”. New Philosophy of Health New philosophy of health may be stated as below: • Health is fundamental human right • Health is the essence of productive life, and not the result of ever- increasing expenditure on medical care • Health is intersectoral • Health is an integral part of development • Health is central to the concept of quality of life • Health involves individuals, state and international responsibility • Health and its maintenance is a major social investment • Health is a worldwide social goal CONCEPT OF HEALTH Modern views consider that health is not a static condition but a dynamic and evolving state. It varies with individual, environment, and socio- cultural context. A person may be considered healthy even in the presence of minor illness if overall functional ability and well-being are maintained. Thus, health reflects the ability of an individual to lead a socially and economically productive life. DIMENSIONS OF HEALTH Health is multidimensional and includes: • Physical dimension – Proper functioning of body systems • Mental dimension – Emotional stability and psychological well-being • Social dimension – Ability to maintain relationships and social roles • Intellectual dimension – Capacity for learning and decision-making 17Applied Community Health Education

• Spiritual dimension – Sense of purpose and values • Occupational dimension – Satisfaction and productivity in work CONCEPT OF COMMUNITY Traditionally, a community referred to a group of people living within a specific geographic boundary. However, in community health, a community is defined as a group of people who share common characteristics such as location, culture, occupation, interests, or social bonds. Communities may also exist in non-geographical forms, such as online or cyber communities. Key characteristics of a community: • Sense of belonging (membership) • Shared values and norms • Common symbols (language, traditions) • Mutual influence among members • Shared needs and cooperation • Emotional connection and shared experiences A healthy community is one where people identify their needs, utilize resources effectively, and support systems that promote health and well- being. DEFINITION OF COMMUNITY HEALTH Community health refers to the health status of a defined group of people and the organized efforts undertaken to promote, protect, and restore their health. Unlike individual health care, which is concerned with diagnosis and treatment of a single patient, community health addresses health issues at the population level. It focuses on: • Prevention of disease • Promotion of health • Improvement of quality of life Community health integrates the concept of health with collective action, aiming to improve the well-being of populations through preventive, promotive, and accessible health services. 18Applied Community Health Education

1.2 OBJECTIVES AND SCOPE OF COMMUNITY HEALTH EDUCATION Community health education is an integral component of public health, aimed at improving the knowledge, attitudes, and practices of individuals and communities in a manner that promotes, maintains, and restores health. It involves the translation of scientific health information into simple and practical messages that people can understand and apply in daily life. With the emergence of the Alma-Ata Declaration (1978), the concept of health education has undergone significant transformation. Over time, the focus of health education has shifted from mere information sharing to promoting healthy lifestyles, community participation, and self-reliance. It is now considered a dynamic process that enables individuals and communities to take responsibility for their own health. 1.2.1 OBJECTIVES OF COMMUNITY HEALTH EDUCATION The primary objective of health education is to bring about positive and sustained behavioural change. This is achieved through the following: • Promotion of healthy lifestyles: Encouraging balanced diet, personal hygiene, exercise, and avoidance of harmful habits • Proper utilization of health services: Creating awareness about available health services and their appropriate use facilitating early diagnosis, timely treatment, and preventive care. • Development of knowledge, attitudes and skills: Health education provides essential information and helps develop positive attitudes and practical skills, enabling individuals to make informed decisions and effectively manage their health problems. • Community participation and self-reliance: Motivating people to actively participate in health programmes and solve their own health problems Role of Health Care Providers in Health Education Health care providers play an important role in delivering health education at the community level. Their function extends beyond treatment to include guidance and support for healthy living. 19Applied Community Health Education

They help individuals and communities understand health problems, provide accurate and culturally appropriate information, and guide them towards practical solutions. They also facilitate the adoption of preventive and promotive health measures, thereby acting as agents of behavioural change. 1.2.2 SCOPE OF COMMUNITY HEALTH EDUCATION The scope of community health education is broad and covers all aspects that influence health. It focuses on promoting healthy practices and preventing disease at individual and community levels. Major areas include: • Human biology: This component includes knowledge of the structure and functions of the human body and the principles of maintaining physical fitness. It covers personal hygiene, exercise, rest, and sleep, as well as the harmful effects of tobacco, alcohol, and drugs. Reproductive health, child health, and basic preventive practices also form an important part of this area. The objective is to enable individuals and communities to understand their bodies and adopt healthy living practices. • Nutrition: Nutrition education aims at promoting balanced and adequate dietary practices. It focuses on practical aspects such as appropriate food selection, breastfeeding, weaning, and nutrition for vulnerable groups, rather than theoretical details of nutrients. It also addresses common misconceptions and aims to improve dietary habits within the community. • Environmental health: This area emphasizes the importance of a healthy environment in disease prevention. It includes safe water supply, sanitation, waste disposal, housing conditions, and control of environmental pollution. Health education in this domain promotes practices that ensure a clean and safe living environment. • Disease prevention and control: Health education plays a crucial role in increasing awareness about communicable and non-communicable diseases. It includes information on preventive measures, immunization, early detection, and timely treatment, thereby contributing to reduction in disease burden. 20Applied Community Health Education

• Maternal and child health: This includes education on antenatal, intranatal, and postnatal care, family planning, child growth, and development. It aims to ensure safe motherhood, reduce infant and maternal mortality, and promote healthy family life. • Mental health and lifestyle: This component addresses psychological well-being, stress management, emotional stability, and prevention of substance abuse. It promotes the development of healthy lifestyle behaviours and coping mechanisms. Overall, the scope of health education is extensive and aims at improving all dimensions of health through informed behavioural practices. 1.2.3 METHODS AND PRACTICE OF HEALTH EDUCATION Health education is implemented through various methods depending on the target population and available resources. The aim is to ensure effective communication and better understanding. Common approaches include: • Individual approach: One-to-one communication such as counselling and personal guidance • Group approach: Health talks, discussions, and demonstrations for small groups • Mass approach: Use of mass media like radio, television, and newspapers to reach large populations Supportive tools such as audio-visual aids such as charts, posters, and models enhance learning by making information clearer and more attractive. Traditional or folk media may also be used to deliver messages in a culturally acceptable manner. Health education activities should be systematically planned based on community needs, with clear objectives and appropriate strategies. Evaluation is essential to assess effectiveness and to improve future programmes. Detailed methods and techniques of health education are discussed in the subsequent unit. 21Applied Community Health Education

1.3 DETERMINANTS OF HEALTH Health is influenced by multiple factors that operate both within the individual and in the surrounding environment. It is not determined by a single cause but results from the interaction of various biological, social, and environmental influences. These factors may act independently or in combination, either promoting health or contributing to disease. Understanding these determinants is essential for planning effective health interventions and improving the health status of individuals and communities. The major determinants of health include biological factors, lifestyle and socio-cultural conditions, environment, socio-economic conditions, health services, ageing, gender, and other related influences. 1. Biological Determinants: Biological factors play an important role in determining the health of an individual. The genetic constitution inherited at the time of conception influences physical and mental characteristics and susceptibility to certain diseases. Some diseases such as chromosomal abnormalities, errors of metabolism, mental retardation, and certain forms of diabetes have a genetic basis. Although genetic makeup cannot be altered, advancements in medical genetics have made early detection and prevention possible through screening and counselling. Health can therefore be partly understood in terms of the individual’s genetic potential and its expression under favourable environmental conditions. 2. Behavioural and Socio-Cultural Conditions: Lifestyle refers to the way individuals live, including their habits, behaviours, and cultural practices. These patterns are developed through social interaction with family, peers, and society. Health is closely linked to lifestyle choices such as diet, physical activity, smoking, alcohol consumption, and personal hygiene. Unhealthy behaviours are associated with many modern health problems, including cardiovascular diseases, obesity, and addiction. In developing countries, health risks are also influenced by traditional practices, poor sanitation, and lack of awareness. Promotion of healthy lifestyle is therefore essential for disease prevention and health promotion. 22Applied Community Health Education

3. Environment: The environment has a direct impact on health and includes all external factors to which an individual is exposed after birth. It can be broadly classified into physical, biological, and psychosocial components. Physical factors include air, water, housing, and climate; biological factors include microorganisms and vectors; while psychosocial factors include stress, family structure, and social relationships. A favourable environment supports physical and mental well-being, whereas an unhealthy environment increases the risk of disease. Environmental protection and improvement are therefore essential components of community health. 4. Socio-Economic Conditions: Socio-economic factors have a strong influence on health status and quality of life. Important components include economic status, education, occupation, and the political system. • Economic status: The per capita GNP is the most widely accepted measure of general economic performance. There can be no doubt that in many developing countries, it is the economic progress that has been the major factor in reducing morbidity, increasing life expectancy and improving the quality of life. The economic status determines the purchasing power, standard of living, quality. of life, family size and the pattern of disease and deviant behavior in the community. It is also an important factor in seeking health care. Ironically, affluence may also be a contributory cause of illness as exemplified by the high rates of coronary heart disease, diabetes and obesity in the upper socio- economic groups. • Education: A second major factor Influencing health status is education (especially female education). The world map of illiteracy closely coincides with the maps of poverty, malnutrition, ill health, high infant and child mortality rates. Studies indicate that education, to some extent, compensates the effects of poverty on health, irrespective of the availability of health facilities. The small state of Kerala in India is a striking example. Kerala has an estimated infant mortality rate of 6 compared to 28 for all-India in 2020. A major factor in the low infant mortality of Kerala is its high female literacy rate of 98.3 per cent as compared to 71.5 per cent for all-India for the year 2019-20. 23Applied Community Health Education

• Occupation: The very state of being employed in productive work promotes health, because the unemployed usually show a higher incidence of ill health and death. For many, loss of work may mean loss of Income and status. It can cause psychological and social damage. • Political system: Health is also related to the country’s political system. Often the main obstacles to the implementation of health technologies are not technical, but rather political. Decisions concerning resource allocation, manpower policy, choice of technology and the degree to which health services are made available and accessible to different segments of the society are examples of the manner in which the political system can shape community health services. The percentage of GNP spent on health is a quantitative indicator of political commitment. The WHO has set the target of at least 5 per cent expenditure of each country’s GNP on health care. However, India spends about 1 per cent of its GNP on health and family welfare. What is needed is political commitment and leadership which is oriented towards social development, and not merely economic development. If poor health patterns are to be changed, then changes must be made in the entire socio-political system in any given community. Social, economic and political actions are required to eliminate health hazards in people’s working and living environments. Thus, improvement in socio- economic conditions is essential for achieving better health outcomes in the community. 5. Health Services: The term health and family welfare services cover a wide spectrum of personal and community services for treatment of disease, prevention of illness and promotion of health. The purpose of health services is to improve the health status of the population. For example, immunization of children can influence the incidence/prevalence of particular diseases. Provision of safe water can prevent mortality and morbidity from water-borne diseases. The care of pregnant women and children would contribute to the reduction of maternal and child morbidity and mortality. To be effective, the health services must reach the social periphery, equitably distributed, accessible at a cost the country and community can afford, and socially acceptable. All these are ingredients of what is now termed “primary health care”, which is seen as the way to better health. 24Applied Community Health Education

6. Ageing of the Population: With increasing life expectancy, the proportion of elderly individuals in the population is rising. Ageing is associated with a higher prevalence of chronic diseases, disabilities, and degenerative conditions. This creates additional challenges for health systems, requiring special attention to geriatric care, long-term management, and supportive services for the elderly. 7. Gender: The 1990s have witnessed an increased concentration on women’s issues. In 1993, the bal Commission on Women’s Health was established. The commission drew up an agenda for action on women’s health covering nutrition, reproductive health, the health consequences of violence, ageing, lifestyle related conditions and the occupational environment. It has brought about an increased awareness among policy- makers of women’s health issues and encourages their inclusion in all development plans as a priority. 8. Other Factors: We are witnessing the transition from post-industrial age to an information age and experiencing the early days of two interconnected revolutions, in information and in communication. The development of these technologies offers tremendous opportunities in providing an easy and instant access to medical information once difficult to retrieve It contributes to dissemination of information worldwide, serving the needs of many physicians, health professionals, biomedical scientists and researchers, the mass media and the public. Other contributions to the health of population derive from systems outside the formal health care system, i.e., health related systems (e.g., food and agriculture, education, industry, social welfare, rural development), as well as adoption of policies in the economic and social fields that would assist in raising the standard of living. This would include employment opportunities, Increased wages, prepaid medical programmes and family support systems. In short, medicine is not the sole contributor to the health and well-being of population. The potential of intersectoral contributions to the health of communities is increasingly recognized. 1.4 LEVELS OF HEALTH CARE Health care represents an organized system of services aimed at promoting, maintaining, monitoring, and restoring health. It reflects a collective responsibility towards the well-being of individuals, families, and communities. 25Applied Community Health Education

It is important to distinguish between health care and medical care. Health care is a broad concept that includes preventive, promotive, curative, and rehabilitative services. Medical care, on the other hand, forms only a part of health care and refers mainly to diagnostic and treatment services provided by physicians and other health professionals. Health services are structured in a hierarchical manner to ensure efficient delivery of care. Each level is supported by a higher level to which patients are referred when more specialized services are required. This system ensures both accessibility and continuity of care. 1. Primary Health Care: Primary health care constitutes the first level of contact between the individual and the health system. It provides essential health services that are universally accessible and acceptable to the community. Most common health problems can be effectively managed at this level. It emphasizes preventive, promotive, and basic curative care, along with health education and community participation. In India, primary health care is delivered through Subcentres and Primary Health Centres (PHCs), supported by frontline health workers such as ASHA workers and ANMs. This level plays a crucial role in early detection of diseases and reducing the burden on higher levels of care. 2. Secondary Health Care: Secondary health care serves as the first referral level in the health system. It deals with more complex health conditions that cannot be managed at the primary level. This level primarily provides specialized diagnostic and curative services. It is delivered through Community Health Centres (CHCs) and district hospitals, where facilities for inpatient care, laboratory services, and specialist consultations are available. Secondary care acts as a link between primary and tertiary care, ensuring that patients receive timely and appropriate treatment. 3. Tertiary Health Care: Tertiary health care represents the highest level of health services and is concerned with highly specialized and advanced medical care. It includes super-specialty services such as cardiology, neurology, oncology, and advanced surgical procedures. These services are provided by regional and national institutions, medical colleges, and specialized hospitals. 26Applied Community Health Education

In addition to patient care, tertiary institutions are involved in medical education, research, and health policy planning. They also support and guide lower levels of care through training and technical expertise. The three-tier system of health care ensures a structured and efficient approach to service delivery. By distributing health services across primary, secondary, and tertiary levels, the system improves accessibility, reduces overcrowding at higher centres, and promotes rational use of resources. An effective referral system linking all three levels is essential for ensuring continuity of care and achieving better health outcomes in the community. 1.5 ROLE OF HEALTH CARE PROFESSIONALS IN COMMUNITY HEALTH Community health is a vital branch of health sciences that focuses on the promotion, protection, and maintenance of health at the level of populations rather than individuals alone. It encompasses organized and sustained efforts by society, health systems, and professionals to improve health conditions, prevent disease, and ensure equitable access to essential health services. Unlike clinical medicine, which primarily deals with diagnosis and treatment of individuals, community health adopts a broader perspective by addressing the social, environmental, and behavioural determinants that influence health outcomes. The success of community health initiatives largely depends on the effective participation of a multidisciplinary team of health care professionals, including physicians, nurses, public health workers, and pharmacists. Each of these professionals contributes uniquely to the delivery of preventive, promotive, curative, and rehabilitative services. Their coordinated efforts are essential for reducing disease burden, improving quality of life, and achieving public health goals, especially in resource-limited settings. Among these professionals, pharmacists occupy a particularly significant position due to their accessibility, frequent interaction with the public, and expertise in medicines. Traditionally, the role of the pharmacist was confined to the preparation and dispensing of drugs. However, with the evolution of health care systems, increased availability of manufactured medicines, and growing emphasis on patient safety and rational drug use, the role has undergone a profound transformation. Modern pharmacy 27Applied Community Health Education

practice is no longer product-oriented but patient-centred, focusing on ensuring optimal therapeutic outcomes and improving the overall well- being of individuals and communities. In the context of community health, pharmacists often serve as the first point of contact for individuals seeking health advice, especially in developing countries like India, where access to physicians may be limited or delayed. Their role extends beyond dispensing medicines to include patient counselling, health education, early detection of diseases, and promotion of preventive health practices. By bridging the gap between the health care system and the community, pharmacists play a crucial role in enhancing accessibility and continuity of care. 1.5.1 GENERAL ROLE OF HOMOEOPATHIC PHARMACIST IN COMMUNITY HEALTH Health care professionals contribute to community health through a range of activities aimed at promoting, protecting, and restoring health. Among them, pharmacists occupy a distinct and practical role, especially in community settings, due to their accessibility, frequent patient interaction, and expertise in medicines. While all health care professionals are involved in broad functions such as health promotion, disease prevention, diagnosis, treatment, and rehabilitation, the pharmacist’s role within each of these areas is focused on medication-related care, patient guidance, and public health support. Their contribution strengthens both individual patient outcomes and overall community health indicators. 1. Health Promotion Health promotion refers to enabling individuals and communities to improve their health by adopting healthy behaviours and lifestyles. Pharmacist’s Role in Health Promotion Pharmacists play a major role in promoting health because they are often the first point of contact for the public. Unlike other professionals who are accessed only after illness, pharmacists interact with both healthy and sick individuals. They contribute by: 28Applied Community Health Education

• Providing lifestyle counselling: Pharmacists educate individuals about maintaining a balanced diet, regular physical activity, adequate sleep, and stress management. For example, a pharmacist advising a patient buying antacids about dietary triggers indirectly promotes long-term health. • Promoting behavioural changes: They guide patients on smoking cessation, alcohol moderation, and avoidance of harmful habits. Many community pharmacies actively support smoking cessation programs. • Improving medication awareness: Health promotion also includes educating people about the correct use of medicines, preventing misuse, and encouraging responsible self-medication. • Community-level awareness activities: Pharmacists participate in health camps and awareness drives, educating the public about hygiene, sanitation, and preventive health practices. 2. Disease Prevention Disease prevention aims to reduce the occurrence and impact of diseases. It is classified into primary, secondary, and tertiary levels, and pharmacists actively contribute at all these stages. Pharmacist’s Role in Disease Prevention a) Primary Prevention (Before disease onset): At this stage, the goal is to prevent the occurrence of disease. • Pharmacists educate individuals about vaccination and immunization schedules, emphasizing their importance in preventing infectious diseases. • They promote personal hygiene practices such as handwashing, safe drinking water, and sanitation. • They advise on nutritional supplements and healthy lifestyles, especially in vulnerable groups like children, pregnant women, and the elderly. For example, during seasonal changes, pharmacists may advise preventive measures for respiratory infections or gastrointestinal illnesses. b) Secondary Prevention (Early detection and intervention): Here, the focus is on identifying disease at an early stage and initiating prompt treatment. 29Applied Community Health Education

• Pharmacists often encounter patients with early symptoms and can identify warning signs such as persistent cough, unexplained fatigue, or frequent urination. • Many pharmacies now support screening services, such as measuring blood pressure or blood glucose levels. • Based on findings, pharmacists advise timely referral to physicians, which helps prevent complications. This role is particularly important in chronic diseases where early detection significantly improves outcomes. c) Tertiary Prevention (Limiting complications): At this stage, the aim is to reduce complications and improve quality of life in patients with established disease. • Pharmacists ensure proper medication adherence, which is crucial in long-term conditions like diabetes, hypertension, and asthma. • They educate patients about disease management, including diet, exercise, and monitoring techniques. • They help in preventing drug-related complications such as adverse effects or interactions. Thus, pharmacists contribute across all levels of prevention, making them essential in reducing morbidity and improving population health. 3. Early Diagnosis and Referral Early diagnosis plays a critical role in preventing disease progression and improving prognosis. Although pharmacists do not make formal diagnoses, their role in early recognition and referral is highly significant. Pharmacist’s Role in Early Diagnosis • Recognition of early symptoms: Due to frequent patient interaction, pharmacists can identify patterns such as recurrent complaints, prolonged symptoms, or unusual presentations that may indicate underlying disease. • Assessment of severity: They differentiate between minor ailments that can be managed with OTC medications and conditions requiring medical attention. 30Applied Community Health Education

• Timely referral: Pharmacists guide patients to consult appropriate health care professionals when necessary. This reduces delay in diagnosis, which is a common issue in community settings. For example, repeated requests for cough suppressants may alert the pharmacist to a possible chronic respiratory condition, prompting referral. 4. Treatment and Patient Care Treatment involves appropriate management of diseases to restore health and relieve symptoms. Pharmacist’s Role in Treatment • Accurate dispensing of medicines: Pharmacists ensure that the correct drug, dose, and formulation are provided according to prescription, minimizing medication errors. • Patient counselling: They explain how to take medicines, the importance of completing the course, possible side effects, and precautions. This improves patient understanding and adherence. • Monitoring therapy: Pharmacists assess whether the patient is responding to treatment and identify issues such as lack of improvement or adverse reactions. • Management of minor ailments: For common conditions like cold, fever, headache, or acidity, pharmacists provide appropriate OTC treatment, reducing unnecessary burden on higher health care facilities. Their involvement ensures that treatment is not only provided but also properly understood and effectively followed. 5. Rational Use of Medicines Rational use of medicines means that patients receive appropriate drugs in correct doses, for adequate duration, and at an affordable cost. Pharmacist’s Role in Rational Use • Prevention of drug misuse: Pharmacists regulate the sale of OTC medicines and discourage irrational or excessive use. • Prescription review: They check prescriptions for errors, drug interactions, duplications, and contraindications, thereby enhancing safety. 31Applied Community Health Education

• Patient education: Patients are informed about the importance of adherence, risks of stopping treatment early, and dangers of self-medication. • Control of antibiotic misuse: Pharmacists play a crucial role in reducing antimicrobial resistance by discouraging unnecessary antibiotic use. This role is central to public health, as irrational drug use can lead to treatment failure, resistance, and increased healthcare costs. 6. Rehabilitation and Follow-up Care Rehabilitation aims to restore functional ability and improve quality of life after illness or disability. Pharmacist’s Role in Rehabilitation • Long-term patient support: Pharmacists maintain continuous contact with patients suffering from chronic diseases, providing guidance and encouragement. • Improving medication adherence: They reinforce the importance of continuing treatment even when symptoms are controlled. • Patient education for self-care: Patients are taught how to monitor their condition (e.g., blood glucose monitoring) and recognize warning signs. Pharmacists ensure continuity of care, which is essential for long-term disease control and prevention of relapse. 7. Participation in Public Health Programs Public health programs aim to improve health at the population level through organized efforts. Pharmacist’s Role in Public Health • Participation in health awareness campaigns and screening programs • Supporting immunization drives and preventive programs • Assisting in disease surveillance and reporting • Educating the public about national health initiatives Because of their accessibility, pharmacists help extend the reach of these programs to a larger population. Their involvement strengthens the implementation and effectiveness of community health strategies. 32Applied Community Health Education

8. Pharmacovigilance and Drug Safety Ensuring the safety of medicines is an essential component of community health. Pharmacist’s Role in Pharmacovigilance • Identification of adverse drug reactions (ADRs): Pharmacists are often the first to notice patient complaints related to medications. • Reporting and documentation: They report ADRs to appropriate monitoring systems, contributing to drug safety data. • Patient education: Patients are informed about possible side effects and advised on what to do if they occur. This role helps in improving the safety profile of medicines and protecting public health. 9. Disease Surveillance and Trend Identification Disease surveillance involves continuous monitoring of disease occurrence in a population. Pharmacist’s Role Disease Surveillance • Observation of disease patterns: Pharmacists frequently encounter patients with similar symptoms, allowing them to notice patterns such as an increase in cases of fever, cough, diarrhoea, or skin infections. • Early identification of outbreaks: A sudden rise in the sale of specific medications (e.g., antipyretics, antidiarrheals) may indicate a possible outbreak in the community. • Community-level alertness: By being attentive to such trends, pharmacists can indirectly support early detection of epidemics. This makes pharmacists an important informal surveillance point within the health system. 1.5.2 THE PHARMACIST AND HIS RESPONSIBILITIES As per the Drugs and Cosmetics Rules, a pharmacist is a qualified professional who is authorized to prepare, dispense, and sell medicines. In the context of homoeopathy, the pharmacist plays a crucial role not only in handling medicines but also in ensuring safe, ethical, and patient-centred healthcare delivery. 33Applied Community Health Education

A homoeopathic pharmacist is expected to possess a sound understanding of both pharmaceutical sciences and homoeopathic principles, enabling them to effectively contribute to patient care and community health. Professional Responsibilities The pharmacist’s responsibilities extend beyond dispensing medicines and include the following: • Ensuring patient safety: The primary duty is to safeguard the health and well-being of the patient in all professional activities. • Maintaining quality standards: Medicines that do not meet legal or therapeutic standards should never be dispensed. • Ethical and legal conduct: The pharmacist must avoid all forms of illegal or unethical practices and adhere strictly to professional regulations. • Providing accurate information: Patients should be given clear, truthful, and complete information regarding medicines and services, without any misleading claims. • Awareness of different systems of medicine: The pharmacist should understand the scope and limitations of various treatment systems to guide patients appropriately. • Guiding patient decisions: By offering balanced and reliable information, the pharmacist helps patients make informed choices about their health. Essential Qualities of a Pharmacist A pharmacist should be equipped with the following qualities: • Knowledge of pharmacy: Understanding of drug preparation, dispensing, and storage • Knowledge of pharmacopoeia: Familiarity with official standards of medicines • Professional skill: Accuracy and competence in preparation and dispensing • Handling skills: Proper techniques for storage and safe dispensing of medicines 34Applied Community Health Education

1.6 ROLE OF COMMUNITY HEALTH IN HOMOEOPATHY Community health focuses on improving the health status of people living within a specific community through preventive, promotive, curative, and rehabilitative services. It aims to reduce disease, promote healthy lifestyles, and ensure equitable access to healthcare. Homoeopathy, as a recognized system of medicine, contributes significantly to community health by providing safe, economical, and patient-centered care. It emphasizes holistic treatment, disease prevention, health promotion, and individualized management, making it a valuable component of primary healthcare. The role of homoeopathy extends beyond treating illness. Homoeopathic professionals actively participate in health awareness campaigns, preventive healthcare, school health programmes, maternal and child health services, environmental sanitation initiatives, and community outreach activities. Homoeopathic practitioners play an important role in school health, maternal and child health, elderly care, lifestyle disease prevention, and public health awareness. Effective community health practice also requires timely referral of patients who need emergency or specialized medical care and collaboration with other healthcare professionals. By integrating preventive, promotive, curative, and rehabilitative services, homoeopathy can support the goal of achieving better health outcomes for individuals and communities. 1.6.1 Objectives of Community Health in Homoeopathy The primary objectives are: • To promote positive health among individuals and communities. • To prevent communicable and non-communicable diseases. • To provide accessible and affordable healthcare. • To educate people regarding healthy lifestyles. • To encourage community participation in health programmes. • To improve maternal and child health. • To support rehabilitation and long-term care. • To reduce health inequalities. 35Applied Community Health Education

1.6.2 Role of Homoeopathy in Community Health Homoeopathic practitioners educate communities regarding: • Nutrition • Personal hygiene • Clean drinking water • Physical exercise • Stress management • Mental health • Healthy aging Outcome: Health promotion helps reduce disease burden before illness develops. a) Homoeopathy contributes by: • Identifying risk factors • Early detection of illness • Counseling on preventive measures • Supporting epidemic preparedness • Providing health education during outbreaks Outcome: Preventive healthcare remains one of the most cost-effective public health strategies. b) Homoeopathy provides healthcare for common illnesses such as: • Respiratory infections • Allergic disorders • Skin diseases • Digestive complaints • Musculoskeletal pain • Minor injuries • Functional disorders Outcome: It strengthens primary healthcare services, especially in underserved areas. 36Applied Community Health Education

c) Homoeopathic professionals participate in: • Antenatal health education • Nutritional counseling • Child growth monitoring • Breastfeeding promotion • Family welfare counseling • Adolescent health education Outcome: These activities contribute to healthier mothers and children. d) Homoeopathy supports school health programmes by: • Conducting health check-ups • Educating students on hygiene • Promoting nutrition • Screening for common illnesses • Counseling adolescents • Encouraging healthy habits e) Community-based homoeopathic services help elderly individuals through: • Chronic disease management • Lifestyle counseling • Psychological support • Health education • Rehabilitation guidance f) Mental health is an important component of community health. • Stress management • Counseling • Lifestyle modification • Early identification of mental health concerns • Referral when specialized psychiatric care is required 37Applied Community Health Education

g) Lifestyle Disease Prevention: Homoeopathy supports prevention and management of • Hypertension • Diabetes mellitus • Obesity • Cardiovascular diseases • Arthritis • Stress-related disorders Outcome: Emphasis is placed on healthy lifestyle modifications along with appropriate medical care. h) Role during Public Health Emergencies • Epidemics • Natural disasters • Heat waves • Floods • Earthquakes • Community disease outbreaks i) Health Education in Community through Homoeopathy Personal hygiene • Hand washing • Safe drinking water • Sanitation • Nutrition • Vaccination awareness • Prevention of infectious diseases • Family planning • Maternal health • Child care • Substance abuse prevention • Mental health awareness Outcome: Health education empowers communities to make informed health decisions. 38Applied Community Health Education

j) Community Outreach Activities: Homoeopathic institutions frequently organize • Free medical camps • Rural health camps • School health programmes • Health awareness rallies • Blood donation awareness • Nutrition education • Screening camps • Health exhibitions • Women’s health programmes • Elderly health clinics Outcome: These programmes improve access to healthcare and increase public awareness. k) Role in National Health Programmes : Homoeopathic professionals support various national health initiatives by participating in • Tuberculosis control activities • Leprosy awareness • Vector-borne disease prevention • Maternal and child health programmes • Adolescent health programmes • Non-communicable disease screening • School health initiatives • Nutrition programmes Outcome: Participation should always be in accordance with government policies and institutional guidelines. 39Applied Community Health Education

l) Ethical Responsibilities: Homoeopathic practitioners should • Respect patient confidentiality. • Provide compassionate care. • Practice within their professional competence. • Refer patients requiring emergency or specialized treatment without delay. • Promote evidence-informed healthcare. • Avoid misleading claims. • Encourage healthy behaviors and preventive practices. • Work collaboratively with other healthcare professionals. 1.6.3 Importance of Community Health in Homoeopathy • Improves quality of life. • Reduces disease burden. • Promotes healthy lifestyles. • Supports preventive healthcare. • Reduces healthcare costs. • Strengthens primary healthcare. • Improves maternal and child health. • Enhances public awareness. • Promotes equitable healthcare services. 1.7 DIFFERENCE BETWEEN COMMUNITY HEALTH AND PUBLIC HEALTH Basis Community Health Public Health Definition Community health focuses on improving the health of a specific community or population living in a defined geographic area. Public health focuses on protecting and improving the health of the entire popula-tion through organized efforts of society. 40Applied Community Health Education

Scope Limited to a particular community, locali-ty, or group. Broad; covers local, regional, national, and bal populations. Target Popula-tion Individuals and families within a specific community. Entire populations regardless of commu-nity boundaries. Primary Goal To address local health needs and improve the well-being of a community. To prevent disease, prolong life, and promote health on a large scale. Focus Community participation, local health problems, and accessible healthcare ser-vices. Disease prevention, health promotion, health policy, surveillance, and environ- mental health. Approach Community-based interventions with ac-tive involvement of community members. Population-based interventions led by governments, public agencies, and health organizations. Activities Health education, immunization camps, maternal and child health services, sanita-tion, nutrition programs. National immunization programs, epi-demic control, health legislation, envi-ronmental protection, disease surveil-lance. Responsibility Community health workers, local healthcare providers, NGOs, and commu-nity leaders. Government health departments, public health professionals, international agen-cies, and policymakers. Examples Organizing a village vaccination drive, community nutrition program, local sani- tation campaign. National tuberculosis control program, pandemic response, tobacco control legis-lation, food safety regulations. Outcome Improved health status of a specific com-munity. Improved health indicators of the entire population. 41Applied Community Health Education

CHAPTER -2 Principles and Methods of Health Education 42Applied Community Health Education

Health education is a fundamental component of community health and an essential tool in public health practice. It provides a scientific and systematic approach to improving health by enabling individuals and communities to make informed decisions. It is applied across all levels of healthcare - preventive, promotive, and curative and is integral to national health programmes and community-based interventions. With the changing pattern of diseases and growing emphasis on prevention, health education has gained increasing importance in achieving better health outcomes. 2.1 DEFINITION AND IMPORTANCE OF HEALTH EDUCATION Health education is a process of imparting knowledge, attitudes, and practices that enable individuals and communities to make informed decisions about their health. It is not merely the transfer of information but also the development of skills, motivation, and behavior conducive to healthy living. Health education has been defined by various authorities as follows: “The health is process by which individuals and groups of people learn to behave in a manner conducive to the promotion, maintenance or restoration of health.” By John M. Last “Any combination of learning experiences designed to facilitate voluntary actions conducive to health.” By Green and Kreuter “Consciously constructed opportunities for learning involving some form of communication designed to improve health literacy, including improving knowledge, and developing life skills, which are conducive to individual and community health.” By World Health Organisation “Health education is a process that informs motivates and helps people to adopt and maintain healthy practices and lifestyles, advocates PRINCIPLES AND METHODS OF HEALTH EDUCATION 2CHAPTER 43Applied Community Health Education

environmental changes as needed to facilitate this goal and conducts professional training and research to the same end.” By National Conference on Preventive Medicine (USA). “A process aimed at encouraging people to want to be healthy, to know how to stay healthy, to do what they can individually and collectively to maintain health, and to seek help when needed.” By Alma-Ata Declaration (1978) 2.1.1 CONCEPT OF HEALTH EDUCATION Health education is a planned and systematic process aimed at facilitating voluntary behavioural change. It extends beyond the mere dissemination of information and focuses on developing knowledge, attitudes, and skills that enable individuals and communities to take appropriate actions for maintaining and improving health. Earlier, health education primarily focused on disease prevention and individual behaviour change. With growing understanding of the determinants of health, the concept has evolved to include social, economic, and environmental influences, emphasizing community participation, self-reliance, and promotion of healthy lifestyles. This shift reflects the transition from a purely individual approach to a broader, community- oriented and preventive approach. 2.1.2 IMPORTANCE OF HEALTH EDUCATION The significance of health education is reflected in the following aspects: • Promotion of Healthy Behaviour: Health education helps in shaping knowledge, attitudes, and practices, thereby encouraging the adoption of healthy lifestyles and discouraging harmful behaviours. • Prevention and Control of Diseases: It contributes to the prevention of communicable and non-communicable diseases by reducing risk factors, promoting preventive measures, and encouraging early detection and timely treatment. • Development of Health Literacy and Life Skills: Health education improves the ability to obtain, understand, and use health information effectively. It also develops essential skills such as decision-making, problem-solving, and self-care. 44Applied Community Health Education

• Improvement of Quality of Life: By enabling individuals to cope with health problems and adopt healthier practices, health education enhances well-being, satisfaction, and overall quality of life. • Empowerment and Self-Reliance: Health education promotes independence by enabling individuals and communities to take responsibility for their own health and make informed choices. • Addressing Social Determinants and Health Disparities: It increases awareness of social, economic, and environmental factors affecting health and helps reduce inequalities in access to health services. • Community Participation and Social Action: Health education encourages active involvement of individuals and communities in health programmes and promotes collective efforts to improve community health. • Support to Health Programmes and Policies: It facilitates the planning and implementation of public health programmes and contributes to policy development by generating awareness and community support. • Role in Clinical Care and Patient Management: Health education is an integral part of healthcare delivery, improving treatment compliance, aiding recovery, and helping patients manage chronic conditions effectively. • Economic Benefits: By preventing diseases and reducing complications, health education decreases healthcare expenditure and improves productivity. • Shift Towards Preventive Healthcare: Health education supports the transition from curative to preventive care, emphasizing the principle of “prevention is better than cure.” • Universal Applicability: Health education is applicable at all levels— individual, family, community, and society—and across all stages of life, making it a universal tool for health improvement. Health education serves as a key means of enabling individuals and communities to improve their health through informed choices and appropriate actions. By linking individual actions with community efforts and health services, it contributes to improved health outcomes and the overall development of a healthy society. 45Applied Community Health Education

2.2 PRINCIPLES OF HEALTH EDUCATION Health education integrates the principles of general education with the art and science of medicine. It draws upon behavioural and social sciences such as sociology, psychology, and social anthropology, which help in understanding human behaviour. Since the primary objective of health education is to bring about desirable changes in behaviour, its effectiveness depends upon the application of certain well-established principles that guide both teaching and learning. Credibility Credibility refers to the extent to which the health message and the communicator are perceived as trustworthy by the audience. Health education must be based on scientifically sound knowledge and should be consistent with local culture, educational level, and social values. When the communicator is trusted, the message is more readily accepted, thereby facilitating behavioural change. Interest Interest is a fundamental principle of learning. People are unlikely to respond to messages that do not relate to their needs and concerns. Therefore, health education should be based on the “felt needs” of the community. When programmes address problems recognized by the people themselves, they are more likely to participate and adopt the recommended practices. Participation Participation is a key element of effective health education. Individuals and communities should be actively involved in identifying their health problems and in planning and implementing solutions. Such involvement creates a sense of responsibility and ownership, which enhances acceptance and ensures sustainability of health programmes. The Alma- Ata Declaration emphasizes that people have both the right and duty to participate in their healthcare. 46Applied Community Health Education

Motivation Motivation is the process of stimulating individuals to take action towards desired behavior. It may arise from internal drives, such as the desire for well-being, or from external factors such as rewards, social approval, or fear of disease. In health education, motivation is used to initiate and sustain behavior change by linking health messages with these needs, desires, or incentives. When appropriately applied, it increases receptivity to health messages and encourages individuals to adopt and maintain healthy practices. Comprehension For health education to be effective, the message must be clearly understood by the audience. Communication should be adapted to the level of literacy, language, and cultural background of the people. The use of simple, familiar terms facilitates understanding, whereas complex or technical language may act as a barrier. Teaching should always be within the mental capacity of the learners. Reinforcement Learning requires repetition and reinforcement. Health messages should be repeated at suitable intervals and presented in different ways to strengthen understanding and retention. Reinforcement helps to sustain the desired behaviour and prevents individuals from reverting to previous practices. Learning by Doing Learning is most effective when individuals are actively involved in the process. Health education should therefore provide opportunities for practical participation, enabling individuals to acquire skills and apply knowledge in real-life situations. This leads to better understanding and long-term retention. Known to Unknown Health education should proceed from the known to the unknown, and from simple to more complex concepts. By relating new information to existing knowledge, understanding becomes easier and more meaningful. This approach facilitates gradual learning and acceptance of new ideas. 47Applied Community Health Education

Setting an Example The health educator should set a good example in personal behaviour. Consistency between what is taught and what is practiced enhances credibility and reinforces the message. Lack of such consistency may reduce the effectiveness of health education. Good Human Relations Effective health education requires the establishment of good interpersonal relationships. Mutual trust, respect, and understanding between the educator and the audience facilitate better communication and acceptance of health messages. Feedback Feedback is an essential component of communication. It helps the educator to assess whether the message has been correctly understood and accepted. Based on feedback, necessary modifications can be made to improve the effectiveness of health education. Leaders Leaders are influential members of the community who are respected and trusted by the people. Their involvement in health education helps in gaining community acceptance and cooperation. As agents of change, they play an important role in promoting and sustaining health programmes. The principles of health education provide a sound basis for planning and implementing effective educational activities. Their proper application ensures that health education is meaningful, acceptable, and capable of producing sustained behavioural change. 2.3 METHODS OF HEALTH EDUCATION Health education is delivered through various communication methods aimed at influencing knowledge, attitudes, and practices. The choice of method depends on the objectives, target population, and available resources. In practice, a combination of methods is often required for effective behavioural change. 48Applied Community Health Education

Health education methods are broadly classified into: • Individual approach • Group approach • Mass approach 2.3. INDIVIDUAL APPROACH (ONE-TO-ONE COMMUNICATION) The individual approach involves direct communication between the health educator and the individual. It commonly takes place in clinical settings, health centres, or during home visits. This method is particularly valuable because it allows the message to be tailored to the individual’s specific needs and situation. Opportunities for such education arise when individuals seek care. The health worker can utilize this interaction to provide guidance on: • Disease causation and prevention • Diet and hygiene practices • Personal and environmental health Since the communication occurs in a setting of trust, especially between doctor and patient, the advice given often has a strong and lasting influence. Merits Limitations • Allows personalized guidance based on individual needs • Facilitates discussion, clarification, and persuasion • Immediate feedback is possible • Builds on existing trust between provider and individual • Limited coverage; reaches only a few individuals • Time-consuming method • Depends on individuals seeking contact with health services 49Applied Community Health Education

2.3.2 GROUP APPROACH (EDUCATION OF SMALL GROUPS) The group approach involves educating people in groups with common characteristics such as age, occupation, or health problems. It is widely used in schools, communities, and workplaces. Methods of Group Approach a. Lecture Method (Chalk and Talk) A lecture is a structured oral presentation of information to a group. It is useful for introducing topics and providing organized knowledge. For effectiveness: • Group size should be small (preferably < 30) • Duration should be limited (15–20 minutes) • Simple audio-visual aids may be used Merits Limitations • Economical and easy to organize • Can deliver information to a larger group in a short time • Useful for introduction of topics • Learning is passive • Limited scope for interaction and feedback • Behaviour change is not ensured b. Demonstration Method A demonstration is a practical presentation in which a procedure or skill is shown step by step. It is particularly effective in health education as it translates knowledge into action. It is widely used in areas such as sanitation, maternal and child health, and disease prevention. Merits Limitations Arouses interest and attention Encourages adoption of practices Reinforces learning by doing High motivational value Requires preparation and resources Suitable for limited group size May need repetition for reinforcement 50Applied Community Health Education

c. Group Discussion Group discussion is an interactive method where participants exchange ideas and opinions in a face-to-face setting. It is most effective in small groups. For effective discussion: • Group size: 6–12 members • Presence of a leader (to guide) and recorder (to document) • Active participation from all members It promotes active participation and helps in collective decision-making. Merits Limitations Encourages active participation Promotes exchange of ideas and experiences Helps in attitude and behaviour change Decisions are more acceptable to the group Some members may remain inactive or shy Possibility of dominance by a few individuals Requires skilled moderation d. Panel Discussion A panel discussion involves 4–8 experts discussing a topic before an audience under a moderator. It allows exploration of different viewpoints. Merits Limitations Provides multiple perspectives Encourages audience involvement Can be highly effective if well guided Requires careful planning Audience participation may be limited Depends on competence of panel members e. Symposium A symposium consists of a series of short speeches by experts, each presenting a different aspect of a topic. Interaction among speakers is minimal. 51Applied Community Health Education

Merits Limitations Covers various aspects of a topic systematically Keeps audience alert due to change of speakers Limited interaction Learning remains relatively passive f. Workshop A workshop is a participatory method involving a series of sessions where individuals and groups work on a problem and develop solutions under expert guidance. Merits Limitations Promotes active learning and participation Develops skills and problem-solving ability Results in a plan of action Requires extensive preparation Benefits limited number of participants g. Role Playing (Socio-drama) Role playing involves dramatization of real-life situations. Participants enact roles, and the audience actively engages in observing and suggesting alternatives. Merits Limitations Useful for understanding human behaviour Encourages active involvement Effective for school and community education Requires proper guidance May not suit all types of topics h. Conferences and Seminars These are organized programmes conducted at institutional or higher levels for in-depth discussion and continuing education. They often use a combination of teaching methods. 52Applied Community Health Education

2.3.3 MASS APPROACH (MASS COMMUNICATION) The mass approach uses media to reach large populations. It is useful for creating awareness and disseminating health information widely, including to remote areas. Mass media are primarily one-way communication channels. While they are effective in increasing knowledge and shaping public opinion, they are generally insufficient alone to bring about behavioral change. Therefore, they should be used in combination with other methods. Forms of Mass Media a. Television and Radio Television uses both visual and audio elements, making it highly effective for awareness and influencing attitudes. Radio, on the other hand, is widely accessible and particularly useful for reaching rural and illiterate populations. Merits Limitations • Reach large audiences • Suitable for illiterate populations • Effective in creating awareness • One-way communication • Limited feedback and interaction b. Internet The internet is an emerging and rapidly expanding medium that enables quick access to vast health information and facilitates communication. Its role in health education is increasing significantly Merits Limitations Provides instant and extensive information Enables bal communication Requires access and digital literacy c. Newspapers and Printed Materials These include newspapers, pamphlets, booklets, and magazines, which provide detailed and permanent information. 53Applied Community Health Education

Merits Limitations Convey detailed information Can be stored and reused Low cost in bulk production Limited to literate population Less reach in rural areas d. Direct Mailing Printed materials are sent directly to selected individuals or community leaders. Merits Limitations More personalized communication Useful for targeted awareness Limited reach Depends on distribution efficiency e. Posters, Billboards, and Signs These are visual media designed to attract attention and convey simple messages quickly. Merits Limitations Wide visibility Simple and cost-effective Limited impact on behaviour change Short attention span f. Health Exhibitions and Museums These use models, charts, and displays to communicate health messages and attract large audiences. Merits Limitations Increase awareness and interest Combine visual and personal communication Require organization and resources 54Applied Community Health Education

g. Folk Media Folk media include traditional cultural forms such as songs, dances, dramas, and puppet shows. Merits Limitations Culturally acceptable and relatable Effective in rural communities Limited standardization of message The effectiveness of health education depends on the appropriate selection and combination of methods suited to the target population and objectives. Integrating individual, group, and mass approaches ensures wider reach and better adoption of healthy behaviours. 2.4 AUDIO-VISUAL AIDS IN HEALTH EDUCATION Educational material should aim to focus attention, provide new knowledge, facilitate interpersonal and group discussion, and reinforce or clarify existing knowledge and behaviour. In achieving these objectives, audio-visual aids play a vital role. Definition Audio-visual (A-V) aids are instructional devices that communicate messages through the sense of hearing and/or sight, thereby enhancing understanding, retention, and participation in the learning process. Classification of Audio-Visual Aids Audio-visual aids are Broadly Classified into Three Groups: a) Auditory Aids: These appeal only to the sense of hearing. Examples: Radio, tape recorder, microphones, amplifiers, earphones, megaphones, public addressing systems.Use: Suitable for mass communication and dissemination of health messages, especially where visual aids are not feasible. b) Visual Aids: These appeal to the sense of sight and are effective in presenting ideas clearly. 55Applied Community Health Education

• Non-projected Visual Aids: These do not require any projection equipment. Examples: Chalkboard, posters, charts, leaflets, flannel graph, flash cards, models, specimens, exhibits, etc. They are particularly useful for small group teaching and demonstrations. Models and specimens provide a three-dimensional and realistic understanding, while posters and charts convey key messages quickly. • Projected Visual Aids: These require projection devices. Examples: Slides, film strips, silent films, overhead projectors, epidiascopes, etc They are useful for structured teaching sessions and classroom demonstrations, allowing systematic presentation of content. c) Combined Audio-Visual Aids: These involve both hearing and sight simultaneously and are the most effective form of aids. Examples: Television, sound films (cinema), slide-tape presentations. They are especially useful for large audiences, providing impactful and engaging learning experiences. Advantages and Limitations Merits Limitations • Making learning concrete, clear, and easily understandable • Attracting and sustaining attention • Improving retention and recall • Reducing monotony in teaching • Facilitating better communication and interaction • Enabling dissemination of information to large groups • Require proper planning and technical skill • May be time-consuming to prepare and use • Some aids are costly and not easily available • Dependence on equipment and electricity • Limited effectiveness if not appropriately used or adapted to the audience Principles of Selection and Use: For effective utilization, audio-visual aids should: • Be relevant to the objectives of teaching • Be simple, clear, and easily understandable 56Applied Community Health Education

• Suit the needs, age, and literacy level of the audience • Be attractive and capable of sustaining interest • Be economical and easily available • Be used as a supplement to teaching, not as a substitute Audio-visual aids constitute an important adjunct to health education by enabling clearer presentation of information and improved learner engagement. Their effectiveness depends upon judicious selection and systematic utilization in accordance with the objectives of teaching and the characteristics of the audience. Importance of Audio-Visual Aids Audio-visual aids are indispensable in health education as they improve both the quality and effectiveness of communication. They: • Simplify complex and unfamiliar concepts • Enhance understanding where words alone are insufficient • Increase attention, interest, and motivation • Improve retention by involving multiple senses • Bridge the gap between theory and practical understanding • Encourage active participation and group interaction Thus, they make learning more realistic, meaningful, and experience- based. 2.5 PLANNING AND EVALUATION OF HEALTH EDUCATION PROGRAMS Health education programmes aim at bringing about desirable changes in knowledge, attitudes, and behaviour of individuals and communities. Such programmes cannot be undertaken in isolation; they must be carefully planned in relation to specific health problems and the needs of the community, taking into account socio-cultural and environmental factors. 57Applied Community Health Education

PLANNING 2.5.1 Role of behavioural theories in planning Health education is concerned with modification of human behaviour, which is influenced by individual beliefs, social relationships, and environmental conditions. Behavioural theories provide a scientific framework for understanding these factors and for designing appropriate interventions. They assist in: • Explaining why individuals adopt or resist certain health behaviours • Identifying determinants of behaviour at different levels • Selecting suitable strategies for behaviour change • Providing a basis for evaluation of outcomes Health behaviour is influenced at three levels: • Intrapersonal – knowledge, beliefs, attitudes • Interpersonal – family, peers, social support • Environmental – community norms and policies Common behavioural theories used in planning include: • Health Belief Model – behaviour depends on a person’s perception of risk (susceptibility), seriousness of the condition, and the perceived benefits and barriers to action. • Transtheoretical Model – behaviour change occurs gradually through stages such as awareness, intention, action, and maintenance. • Theory of Planned Behaviour – behaviour is guided by intention, which is influenced by attitude, social pressure, and perceived control over the behaviour. • Social Cognitive Theory – behaviour is influenced by observation, social interaction, and confidence in one’s ability to act (self-efficacy). Concept of Planning Planning is a systematic and logical process of identifying health problems, setting objectives, selecting appropriate methods, and organizing resources to achieve desired behavioural change. It ensures that health education activities are purposeful, organized, and goal-directed. 58Applied Community Health Education

2.5.2 STEPS IN PLANNING OF HEALTH EDUCATION PROGRAMMES Planning is a continuous and sequential process in which each step leads logically to the next 1. Assessment of Situation: The first step involves a comprehensive assessment of the community. Information is collected regarding health problems, as well as the beliefs, practices, and felt needs of the population. This provides a realistic understanding of the situation. 2. Identification and Prioritization of Problems: Based on the data collected, health problems are identified and analysed. Since all problems cannot be addressed simultaneously, priorities are determined considering their magnitude, severity, preventability, and available resources. 3. Setting Goals and Objectives: Goals are broad statements of intent, while objectives are specific, measurable, and time-bound. In health education, objectives are primarily focused on behavioral change, as behavior is the key determinant of health outcomes. 4. Assessment of Resources: Available resources such as manpower, funds, and materials are assessed to ensure that the plan is feasible and realistic. 5. Selection of Methods and Strategies: Appropriate health education methods and strategies are selected based on the characteristics of the target population and the nature of the problem. Behavioral theories play an important role at this stage in guiding the choice of effective approaches for influencing behavior. 6. Preparation of Plan of Action: A detailed plan is formulated, clearly specifying the activities to be undertaken, the personnel responsible, and the time schedule. This provides a structured framework for implementation. 7. Implementation: The planned activities are carried out. Successful implementation requires proper organization, trained personnel, effective communication, and coordination 8. Monitoring: Monitoring is a continuous process during implementation. It involves regular observation and recording of activities to ensure that the programme is progressing as planned and to allow for timely corrective measures. 59Applied Community Health Education

9. Evaluation: Evaluation assesses the extent to which the objectives have been achieved. 10. Reassessment: Planning is a dynamic process. Based on evaluation findings, necessary modifications are made to improve the programme and enhance its effectiveness. EVALUATION 2.5.3 Evaluation of Health Education Programmes Evaluation is an essential part of health education programmes. It determines the effectiveness, efficiency, and impact of the programme and provides a basis for future planning. It helps to: • determine whether the stated objectives have been achieved • assess changes in knowledge, attitudes, and behaviour • identify strengths and weaknesses of the programme • ensure optimal utilization of resources • provide a basis for future planning and decision-making a) How Evaluation is done: Evaluation is carried out in a systematic manner as • Baseline data are collected before the programme to understand the initial status. • Data are collected after implementation using methods such as interviews, questionnaires, or observation. • The results are compared to assess changes in knowledge, attitudes, and behaviour. • The findings are analysed and interpreted to determine the effectiveness of the programme. • The results are then used for improving future planning and activities. b) Components of Evaluation: Evaluation includes assessment of • Relevance – whether the programme addresses a real need • Adequacy – whether sufficient efforts and resources were provided • Accessibility – whether services reached the target population 60Applied Community Health Education

• Acceptability – whether the programme was accepted by the community • Effectiveness – whether objectives were achieved • Efficiency – whether resources were used optimally • Impact – overall improvement in health status and quality of life 2.6 DESCRIPTION OF PUBLIC HEALTH LAWS AND ADMINISTRATION IN INDIA Public health law and administration together form the backbone of a country’s healthcare system. In a populous nation like India, ensuring the health of the community requires not only medical services but also a strong legal and administrative framework. Public health law 3provides the legal authority for the state to regulate activities affecting health, while public health administration ensures the implementation of these laws through organized systems and institutions. Together, they aim to prevent disease, promote health, and improve the quality of life. Definition: Public health law refers to the body of laws that define the powers and duties of the state to protect and promote the health of the population, while balancing individual rights. Scope of Public Health Law: • Disease prevention and control • Regulation of healthcare professionals and services • Environmental sanitation and hygiene • Food safety and drug control • Protection of vulnerable groups (women, children, elderly, disabled) • Control of epidemics and public health emergencies Objectives of Public Health Law: • To protect and promote the health of the population 61Applied Community Health Education

• To prevent diseases arising from unsafe environments and products • To control epidemics and public health emergencies • To support health policies and national health programs • To reduce health inequalities and ensure equitable access to care Constitutional Basis of Public Health in India The Indian Constitution provides the legal foundation for public health these are a) Article 21: Right to Life, interpreted to include the Right to Health b) Directive Principles of State Policy (DPSP): • Article 38 – Promotion of welfare • Article 39(e) – Protection of health of workers • Article 41 – Assistance in sickness and disability • Article 47 – Duty of the state to improve public health and nutrition Health is primarily a state subject, but important areas such as population control, drugs, and prevention of communicable diseases fall under the Concurrent List, allowing joint responsibility of the central and state governments. 2.6.1 CLASSIFICATION OF PUBLIC HEALTH LAWS IN INDIA Public health laws in India can be systematically grouped into the following categories: a) Laws Regulating Medical Profession • Concerned with qualification, registration, and ethical conduct of healthcare professionals • Ensure standards in medical education and practice b) Laws on Drugs, Tobacco and Substances • Regulate manufacture, distribution, and sale of drugs and chemicals • Control tobacco uses and substance abuse • Ensure public safety 62Applied Community Health Education

c) Laws for Epidemic Control and Disaster Management • Empower the government to take emergency measures during outbreaks • Provide authority for quarantine, isolation, and movement restrictions d) Laws for Women’s Health and Welfare • Address maternal health, reproductive rights, and protection against exploitation e) Laws for Child Health and Protection • Ensure nutrition, safety, immunization, and protection from abuse f) Laws for Elderly and Disabled Welfare • Provide social security, healthcare access, and rehabilitation services • This classification reflects how legislation addresses different dimensions of population health. 2.6.2 PUBLIC HEALTH ADMINISTRATION IN INDIA Public health administration refers to the organized application of public health principles through governmental structures to deliver health services efficiently. Administrative Structure India follows a decentralized system of administration extending from the central to the local level Central Level • Ministry of Health and Family Welfare - acts as the apex body responsible for policy formulation, planning, coordination of national health programs, and regulation of medical education and drug standards. • Directorate General of Health Services – functions as the technical advisory body to the Ministry and is responsible for providing technical guidance, coordination, and oversight of implementation of health programs at the national level. 63Applied Community Health Education

State Level • State Ministry of Health and State Health Directorate are responsible for implementing health policies and managing health services within the state. District Level • Chief Medical and Health Officer (CMHO) supervise the implementation of health programs through district hospitals and peripheral health institutions. The district serves as the key administrative and operational unit for public health services. Local Level • Panchayati Raj Institutions in rural areas and Municipalities or Corporations in urban areas are responsible for sanitation, water supply, waste management, and local health services. These bodies ensure community participation and grassroots-level implementation. 2.6.3 ADMINISTRATIVE STRUCTURE OF HEALTH CARE DELIVERY SYSTEM The administrative structure of public health in India lays down the framework for planning, coordination, and supervision of health services at various levels. This structure is functionally linked to the healthcare delivery system, which executes these plans through a three-tier arrangement of primary, secondary, and tertiary care institutions. Thus, administration ensures governance and direction, while the delivery system ensures actual service provision to the community. • Primary level: Sub-Centres and Primary Health Centres (PHCs) serve as the first point of contact, focusing on preventive, promotive, and basic curative services. • Secondary level: Community Health Centres (CHCs) and district hospitals provide specialized care and act as referral units. • Tertiary level: Medical colleges and specialized hospitals offer advanced diagnostic and treatment facilities. 64Applied Community Health Education

Role of Government in Public Health Programs The government plays a central role in implementing public health laws through programs and policies such as National Rural Health Mission (NRHM), National disease control programs, Integrated Disease Surveillance Programme (IDSP), aiming to improve access, strengthen infrastructure, and monitor disease patterns. Challenges in Public Health Law and Administration Despite a comprehensive framework, several limitations exist: • Inadequate infrastructure and funding • Shortage of trained health personnel • Weak enforcement of laws • Fragmentation of healthcare systems • Urban–rural disparities in access • Limited community participation 65Applied Community Health Education

CHAPTER -3 Nutrition and Health 66Applied Community Health Education

Nutrition is the process by which the body obtains and uses nutrients from food for energy, growth, repair, and normal body functions. Good nutrition is an important part of maintaining health, which includes physical, mental, and social well-being. Food provides six major classes of nutrients: carbohydrates, proteins, fats, vitamins, minerals, and water. Carbohydrates are a major source of energy, proteins support growth and tissue repair, and fats provide energy and help the body absorb certain vitamins. Vitamins and minerals are needed in smaller amounts to regulate body processes, while water is essential for hydration, digestion, temperature regulation, and many chemical reactions. A balanced diet provides these nutrients in appropriate amounts. It generally includes a variety of vegetables and fruits, whole grains or other nutrient-rich carbohydrate sources, protein foods, and healthy fats. Limiting excessive added sugars, salt, and highly processed foods can also support good health. Nutrition and health are closely connected. Healthy eating can support normal growth and development, strengthen the immune system, help maintain a healthy body weight, and reduce the risk of conditions such as heart disease, type 2 diabetes, and some nutrient deficiencies. Nutrition works alongside other health behaviors, including regular physical activity, adequate sleep, stress management, and good hygiene. 3.1 NUTRITION Definition Nutrition may be defined as the science of food and its relationship to health. It is concerned primarily with the part played by nutrients in body growth, development and maintenance. The word Nutrient or “food factor” is used for specific dietary constituents such as proteins. Vitamins and minerals. NUTRITION AND HEALTH 3CHAPTER 67Applied Community Health Education

In other way, Nutrition is a Branch of science which deals with study of a dynamic process, in which the consumed food is utilized for nourishing the body and nutrient is an Active ingredient present in food item which term in the quality of food and in turn health of an individual. 3.1.1 NUTRIENTS Nutrients are active ingredients present in food item which determines the quality of food and in turn health of an individual. Nutrients are organic & Inorganic complexes contained in food. Most Natural foods contain more than one Nutrient. NUTRIENTS Macronutrients • Macronutrients are those nutrients which are needed in high quantities by the body • Macronutrients that food gives are carbohydrates, protein & fats • They are also called proximate principles because they form the Main Bulk of food • Proteins ………. 10 to 15 per cent • Fats ………. 15 to 30 per cent • Carbohydrates ….. 50 to 80 per cent Micronutrients • Micronutrients are those nutrients which are required only in small quantities. • These are Vitamins & Minerals • Major Minerals are Sodium, Potassium, Magnesium, Calcium, Phosphorous. MACRONUTRIENTS A. PROTEINS The word “protein” by derivation means that which is of first importance. Indeed they are of the greatest importance in human nutrition. Proteins are complex organic nitrogenous compounds. They are composed of carbon, hydrogen, oxygen, nitrogen and Sulphur in varying amounts. Some proteins also contain phosphorus and iron and occasionally other 68Applied Community Health Education

elements. Proteins differ from carbohydrates and fats in that they contain nitrogen, this usually amounts to about 16 per cent. Proteins constitute about 20 per cent of the body weight in an adult. Sources of Proteins: Humans obtain protein from two main dietary sources they are: a) Animal sources: Proteins of animal origin are found in milk, meat, eggs, cheese, fish and fowl. These proteins contain all the essential amino acids (EAA) in adequate amounts. Egg proteins are considered to be the best among food proteins because of their high biological value and digestibility. They are used in nutrition studies as a “reference protein”. b) Vegetable sources: Vegetable proteins are found in pulses (legumes), cereals, beans, nuts, oil-seed cakes, etc. They are poor in EAA. In developing countries such as India, cereals and pulses are the main sources of dietary protein because they are cheap, easily available and consumed in bulk. Protein content of some foods is as given in Table 1. Table 1 Food Protein (Gram per 100 g. of food) Animal Food: Milk Meat Egg Fish Plant Food: Cereals Pulses Vegetables Fruits Nuts 3.2 – 4.3 18.0 – 26.0 13.0 15.0 – 23.0 6.0 – 13.0 21.0 – 28.0 1-4 1-3 4.5 – 29.0 69Applied Community Health Education

Soyabean Others Food: Oil and fats Sugar and jaggery Nil Nil Assessment of protein nutrition status A battery of tests has been suggested to asses of protein nutrition. These include arm circumference, the creatinine - height index, serum and transferrin, total body nitrogen, etc. At the present time the best measure of the protein nutrition is probably serum albumin concentration. It should be more than 3.5 g/dl, a level of 3.5 g/dl is considered mild degree of malnutrition; a level of 3.0 g/dl severe malnutrition. Serum albumin and transfer the ability of the liver to synthesize proteins. Protein requirements It is customary to express protein requirements in body weight. The Indian Council of Medical Research in 2020 recommended 0.83 g protein/ kg body weight per day as a safe intake for an Indian adult, assuming obligatory nitrogen loss of 48 mg/kg body weight. Functions Proteins are needed by the body for (a) body building, this component is small compared with the maintenance component, except in the very young child and infant; (b) repair and maintenance of body tissues; (c) maintenance of osmotic pressure; and (d) synthesis of certain substances like antibodies, plasma proteins, heamobin, enzymes, hormones and coagulation factors. Proteins are connected with the immune mechanism of the body. The cell mediated immune response and the bactericidal activity of leucocyte have been found to be lowered in severe forms of protein energy malnutrition. Proteins can also supply energy (4 kcal per one gram) when the calorie intake is inadequate, but this is not their primary function. It is considered wasteful if proteins were used for such a purpose. 70Applied Community Health Education

B. FATS Fats are solid at 20-degree Cent; they are called “oils” if they are liquid at that temperature. Fats and oils are concentrated sources of energy. They are classified as: a) Simple lipids, e.g., triglycerides b) Compound lipids, e.g., phospholipids a) Derived lipids, e.g., cholesterol The human body can synthesize triglycerides and cholesterol endogenously. Most of the body fat (99 per cent) in the adipose tissue is in the form of triglycerides. In normal human subjects, adipose tissue constitutes between 10 to 15 per cent of body weight. The accumulation of one kilogram of adipose tissue corresponds to 7,700 kcal of energy. Fatty acids Fats yield fatty acids and glycerol on hydrolysis. Fatty acids are divided into saturated fatty acids such as lauric, palmitic and stearic acids, and unsaturated fatty acids which are further divided into monounsaturated (MUFA) (e.g., oleic acid) and poly-unsaturated fatty acids (PUFA) (e.g., linoleic acid and a-linolenic acid). The poly-unsaturated fatty acids are mostly found in vegetable oils, and the saturated fatty acids mainly in animal fats. However, there are exceptions, as for example, coconut and palm oils, although vegetable oils, have an extremely high percentage of saturated fatty acids. On the other hand, fish oils, although they are not vegetable oils, contain poly and mono- unsaturated fatty acids. Essential Fatty acids Essential fatty acids are those that cannot be synthesized by humans. They can be derived only from food. The most important essential fatty acid (EFA) is linoleic acid, which serves as a basis for the production of other essential fatty acids (e.g., linolenic and arachidonic acids). Not all polyunsaturated fatty acids are essential fatty acids: 71Applied Community Health Education

Sources of Fats The dietary sources of fats may be classified as: a) Animal fats: The major sources of animal fats are ghee, butter, milk, cheese, eggs, and fat of meat and fish. Animal fats with few exceptions like cod liver oil and sardine oil are mostly saturated fats. b) Vegetable fats: Some plants store fat in their seeds, e.g., groundnut, mustard, sesame, coconut, etc. They are sources of vegetable oils. c) Other sources: Small quantities of fat (invisible fat) are found in most other foods such as cereals, pulses, nuts and vegetables. For example, rice carries 3 per cent of fat, wheat 3 per cent, jowar 4 per cent and bajra 6.5 per cent. Large cereal consumption, as in India, provides considerable amounts of “invisible fat”. Moreover, the body can convert carbohydrate into fat. Fats Requirements For adult men, the recommended minimum intake of visible fat is: • 25 g/day for sedentary workers • 30 g/day for moderately active workers • 40 g/day for heavily active workers For adult women, the recommended minimum intake is: • 20 g/day for sedentary workers • 25 g/day for moderately active workers • 30 g/day for heavily active workers Functions Fats have always been equated with calories. They are high energy foods, providing as much as 9 kcal for every gram. By supplying energy, fats spare proteins from being used for energy. Besides providing energy, fats serve as vehicles for fat-soluble-vitamins. Fats in the body support viscera such as heart, kidney and intestine; and fat beneath the skin provides insulation against cold. Without fat, food is limited in palatability. 72Applied Community Health Education

C. CARBOHYDRATES Carbohydrates are third major components of food. They provide energy 4 kcal/gram. Carbohydrates are essential for human nutrition, alongside proteins and fats. They serve as the body’s main source of energy and play a vital role in maintaining metabolic processes, supporting physical activity, and ensuring proper functioning of organs, especially the brain and muscles. Chemical Nature • Carbohydrates are organic compounds composed of carbon (C), hydrogen (H), and oxygen (O), typically in the ratio C_n (H_2 O)_n. • They exist in simple forms (sugars) and complex forms (starches and fibers). There are 3 main sources of carbohydrate: a) Starch Found in abundance in cereals, roots and tubers. b) Sugar Monosaccharides (glucose, fructose and galactose); Disaccharides (sucrose, lactose and c) Cellulose It is indigestible component of carbohydrate with scarcely any nutritive value, cont. dietary fibre. The carbohydrate reserve (glycogen) of a human adult is about 500 g. Glycemic index of a food is defined by the area under the two-hour blood glucose response cu following the ingestion of a fixed portion of test carbohydrate (usually 50 g) as a proportion (%) of the standard (either glucose or white bread). Low glycemic index foods are less readily digestible and has lower absorption of sugars. Classification GI range Example Low Glycemic index 55 or less Fruit and vegetables (except potatoes, watermelon. Sweet corn, whole grains, bean) Medium Glycemic index 56-69 Sucrose, basmati rice brown rice High Glycemic index 70 or more Corn flakes, baked potatoe, wite bread, candy bar etc., 73Applied Community Health Education

Classification of Carbohydrate: Based on structure, carbohydrates are classified into: • Monosaccharides (e.g., glucose, fructose, galactose) • Disaccharides (e.g., sucrose, lactose, maltose) • Polysaccharides (e.g., starch, glycogen, cellulose) Dietary Sources • Simple Carbohydrates: Fruits, honey, milk, sugar. • Complex Carbohydrates: Cereals (rice, wheat, maize), pulses, potatoes, bread, pasta, vegetables. • Fiber: Whole grains, legumes, leafy vegetables, fruits. Carbohydrate Requirement • Carbohydrates should contribute 45–65% of total daily energy intake according to dietary guidelines. • The exact requirement varies with age, activity level, and physiological state (e.g., pregnancy, lactation, illness). Functions • Energy Source: Each gram of carbohydrate provides approximately 4 kcal of energy. Glucose is the preferred fuel for the brain and red blood cells. • Energy Storage: Excess glucose is stored as glycogen in the liver and muscles. • Protein-Sparing Action: Adequate carbohydrate intake prevents the breakdown of proteins for energy. • Fat Metabolism: Carbohydrates aid in the complete oxidation of fats, preventing ketosis. • Dietary Fiber Role: Non-digestible carbohydrates (fiber) regulate bowel movements, lower cholesterol, and support gut health. MICRONUTRIENTS A. VITAMINS Vitamins are a class of organic compounds categorized as essential nutrients. They are required by the body in very small amounts. They 74Applied Community Health Education

fall in the category of micronutrients. Vitamins do not yield energy but enable the body to use other nutrients. Since the body is generally unable to synthesize them (at least in sufficient amounts) they must be provided by food. A well-balanced diet supplies in most instances the vitamin needs of a healthy person. Vitamins are divided into two groups: a) Fat soluble vitamins, viz., vitamins A, D, E and K. b) Water soluble vitamins, viz., vitamins of the B-group and vitamin C. Each vitamin has a specific function to perform and deficiency of any particular vitamin may lead to specific deficiency diseases. 1. FAT SOLUBLE VITAMINES 1) VITAMIN A “Vitamin A” covers both a pre-formed vitamin, retinol, and a pro-vitamin, beta carotene, some of which is converted to retinol in the intestinal mucosa. The international units (IU) originally established for vitamin A and provitamin were discarded in 1954 and 1956 respectively. In 1960, the term “retinol” was introduced for vitamin A. The international unit (IU) of vitamin A is equivalent to 0.3 microgram of retinol (or 0.55 microgram of retinol palmitate). Some food composition tables give separate values for retinol and beta-carotene. Ta convert these into a single value, the term “retinol equivalent” (RE) has been conventionally adopted. The conversion can be done in the following way. 1 mcg of retinol = 1 RE 1 mcg of ẞ-carotene = 0.167 mcg of RE 1 mcg of another carotenoids = 0.084 mcg of RE 1 RE = 3.333 IU of Vitamin A Sources of Vitamin A : Vitamin A is widely distributed in animal and plant foods in animal foods as preformed vitamin A (retinol), and in plant foods as provitamins (carotenes). a) Animal foods: Foods riche in retinol are liver, eggs, butter, cheese, whole milk, fish and meat. Fish liver oils are the richest natural sources of retinol, but they are generally used as nutritional supplements rather than as food sources. 75Applied Community Health Education

b) Plant foods: The cheapest source of vitamin A is green leafy vegetables such as spinach and amaranth which are found in great abundance in nature throughout the year. The darker the green leaves, the higher its carotene content. Vitamin A also occurs in most green and yellow fruits and vegetables (e.g., papaya, mango, pumpkin) and in some roots (e.g., carrots). The most important carotenoid is beta-carotene which has the highest vitamin A activity. Carotenes are converted to vitamin A in the small intestine. This action is poorly accomplished in malnourished children and those suffering from diarrhoea. c) Fortified foods: Foods fortified with vitamin A (e.g., vanaspati, margarine, milk) can be an important source. Deficiency The signs of vitamin A deficiency are predominantly ocular. They include night blindness, conjunctival xerosis, Bitot’s spots, corneal xerosis and keratomalacia. The term “xerophthalmia” (dry eye) comprises all the ocular manifestations of vitamin A deficiency ranging from night blindness to keratomalacia, Given below is a short description of the ocular manifestations. Functions Vitamin A participates in many bodily functions: it is indispensable for normal vision. It contributes to the production of retinal pigments which are needed for vision in dim light. it is necessary for maintaining the integrity and the normal functioning of glandular and epithelial tissue which lines intestinal, respiratory and urinary tracts as well as the skin and eyes. it supports growth especially skeletal growth. it is anti-infective; there is increased susceptibility to infection and lowered immune response in vitamin A deficiency, and (e) it may protect against some epithelial cancers such as bronchial cancers, but the data are not fully consistent. However, the role of vitamin A at the molecular level is not yet known. 2) VITAMIN D The nutritionally important forms of Vitamin D in man are Calciferol (Vitamin D,) and Cholecalciferol (Vitamin D). Calciferol may be derived by irradiation of the plant sterol, ergosterol. Cholecalciferol is the naturally 76Applied Community Health Education

occurring (preformed) vitamin D which is found in animal fats and fish liver oils. It is also derived from exposure to UV rays of the sunlight which convert the cholesterol in the skin to vitamin D. Vitamin D is stored largely in the fat depots. Sources of Vitamin D: Vitamin D is unique because it is derived both from sunlight and foods. a) Sunlight: Vitamin D is synthesized by the body by the action of UV rays of sunlight on 7-dehydrocholesterol, which is stored in large abundance. in the skin. Exposure to UV rays is critical; these can be filtered off by air pollution. Dark-skinned races such as Negros, also suffer from this disadvantage because black skin can filter off up to 95 per cent of UV rays. b) Foods: Vitamin D occurs only in foods of animal origin. Liver, egg yolk, butter and cheese, and some species of fish contain useful amounts. Fish liver oils, although not considered to be a food, are the richest source of vitamin D. Other sources of vitamin D are foods artificially fortified with vitamin D, such as milk, margarine, vanaspati and infant foods. c) Dietary sources Source μg/per 100g Sources μg/per 100g Butter 0.5 –1.5 Shark liver oil 30 –100 Eggs 1.25--1.5 Cod liver oil 200 – 750 Milk, whole 0.1 Halibut liver oil 500 – 10,000 Fish fat 5-30 Deficiency Rickets: Vitamin D deficiency leads to rickets, Osteomalacia: In adults, vitamin D deficiency may result in osteomalacia which occurs mainly in women, especially during pregnancy and lactation when requirements of vitamin D are increased. 77Applied Community Health Education

Functions • Intestine: Promotes intestinal absorption of calcium and phosphorus • Bone: Stimulates normal mineralization, enhances bone reabsorption, affects collage maturation. • Kidneys: Increases tubular reabsorption of phosphate, variable effect on reabsorption of calcium • Other: Permits normal growth. 3) VITAMIN E Vitamin E is a collective term for a group of naturally occurring fat-soluble compounds known as tocopherols. It acts as a powerful antioxidant. It helps shield cells from oxidative stress, strengthens the immune system, and contributes to the maintenance of healthy skin and vision. Among its various forms, alpha-tocopherol is the most active in humans, with adults advised to consume about 15 mg (22 IU) daily. Sources of Vitamin E: Vitamin E is widely distributed in foods. Rich dietary sources include: • Oils: Wheat germ, sunflower, safflower, soybean oil. • Nuts & Seeds: Almonds, sunflower seeds, peanuts. • Vegetables: Spinach, beet greens, collard greens, pumpkin, red bell pepper. • Fruits: Mangoes, avocados, asparagus. Association with Fatty Acids Foods rich in poly unsaturated fatty acids are generally good sources of vitamin E. Normal Plasma Level. The usual plasma concentration of vitamin E in adults ranges from 0.8 to 1.4 mg/100 ml. Recommended Intake: The current estimated requirement is 0.8 mg per gram of essential fatty acids, which approximates 7.5–10 mg/day depending on the type of edible oil consumed. Clinical Caution: High concentrations of vitamin E have shown cytotoxic effects on human lymphocytes in vitro. Therefore, excessive or mega-dose supplementation should be used cautiously in clinical practice. 78Applied Community Health Education

4) VITAMIN K Vitamin K occurs in at least two major forms - vitamin K 1 and vitamin K 2. Vitamin K 1 is found mainly in fresh green vegetables particularly dark green ones, and in some fruits. Cow’s milk is a richer source (60 mcg/L) of vitamin K than human milk (15 mcg/L). Vitamin K 2 is synthesized by the intestinal bacteria, which usually provides an adequate supply in man. Long-term administration of antibiotic doses for more than a week may temporarily suppress the normal intestinal flora, (a source of vitamin K ₂) and may cause a deficiency of vitamin K. Vitamin K is stored in the liver. The role of vitamin K is to stimulate the production and/or the release of certain coagulation factors. In vitamin K deficiency, the prothrombin content of blood is markedly decreased and the blood clotting time is considerably prolonged. The vitamin K requirement of man is met by a combination of dietary intake and microbial synthesis in the gut. The daily requirement for man appears to be about 0.03 mg/kg for the adult. Newborn infants tend to be deficient in vitamin K due to minimal stores of prothrombin at birth and lack of an established intestinal flora. Soon after birth, all infants or those at increased risk should receive a single intramuscular dose of a vitamin K preparation (0.1-0.2 mg of menadione sodium bisulphite or 0.5 mg of vitamin K₁) by way of prophylaxis. 2. WATER SOLUBLE VITAMINES (B Group of Vitamines) 1) THIAMINE (VIT-B₁) Thiamine (vitamin B,) is a water-soluble vitamin. It is essential for the utilization of carbohydrates. Thiamine pyrophosphate (TPP), the coenzyme of cocarboxylase plays a part in activating transketolase, an enzyme involved in the direct oxidative pathway for glucose. In thiamine deficiency, there is accumulation of pyruvic and lactic acids in the tissues and body fluids. Sources of Thiamine Thiamine occurs in all natural foods, although in small amounts. Important sources are: whole grain cereals, wheat, gram, yeast, pulses, oilseeds and 79Applied Community Health Education

nuts, especially groundnut. Meat, fish, eggs, vegetables and fruits contain smaller amounts. Milk is an important source of thiamine for infants, provided the thiamine status of their mothers is satisfactory. The main source of thiamine in the diet of Indian people is cereals (rice and wheat) which contribute from 60-85 per cent of the total supply. The thiamine content of selected food. Dietary sources of Thiamine Foods of Foods of Vegetable Origin (mg/100 g) Animal Origin (mg/100 g) Wheat (whole) 0.45 Milk, cow’s 0.05 Rice, raw home-pounded 0.21 Egg, hen’s 0.10 Rice, milled 0.06 Mutton 0.18 Bengal gram dhal 0.48 Liver, sheep 0.36 Almonds 0.24 Gingelly seeds 1.01 Groundnut 0.90 Deficiency The two principal deficiency diseases are beriberi an Wernick’s encephalopathy. Beriberi may occur in three forms: a) The dry form characterized by nerve involve me (peripheral neuritis); b) The wet form characterized by hea involvement (cardiac beriberi); and c) Infantile beriberi seen in infants between 2 and 4 months of age. The affected baby is usually breast-fed by a thiamine-deficient moth who commonly shows signs of peripheral neuropath Wernick’s encephalopathy (seen often in alcoholic is characterized by ophthalmoplegia, polyneuritis, a tax and mental deterioration. It occurs occasionally in people who fast. 2) RIBOFLAVIN (VIT-B12) Riboflavin (Vitamin B₂) is a member of the B-group vitamins. It has a fundamental role in cellular oxidation. It plays an important role in maintaining the integrity of mucocutaneous structure. It is a co-factor in a 80Applied Community Health Education

number of enzymes involved with energy metabolism. It is also involved in antioxidant activity, being a co-factor for the enzymes like glutathione reductace and is required for the metabolism of other vitamins like vitamin B6, niacin and vitamin K. Sources of Riboflavin Its richest natural sources are milk, eggs, liver, kidney and green leafy vegetables. Meat and fish contain small amounts. Cereals (whether whole or milled) and pulses are relatively poor sources but because of the bulk in which they are consumed, they contribute much of the riboflavin to Indian diets. Germination increases the riboflavin content of pulses and cereals. The riboflavin content of some common foods is given in Table. Dietary sources of Riboflavin Foods of Foods of Animal Origin (mg/100 g) Vegetable Origin (mg/100 g) Liver, sheep 1.70 Whole cereals 0.10–0.16 Milk, cow’s 0.19 Milled cereals 0.03–0.08 Egg, hen 0.40 Pulses 0.21–0.32 Meat 0.14 Leafy vegetables 0.15–0.30 Deficiency The most common lesion associated with riboflavin deficiency is angular stomatitis, which occurs frequently in malnourished children and its prevalence is used as an index of the state of nutrition of groups of children. Other clinical signs suggestive (but not specific) include cheilosis, ssitis, nasolabial dyssebacia, etc. Hyporiboflavinosis, even when severe, seldom incapacitates the individual, but it may have subtle functional effects such as impaired neuromotor function, wound healing and perhaps increased susceptibility to cataract. Riboflavin deficiency almost always occurs in association with deficiencies of other B-complex vitamins such as pyridoxine; it is usually a part of a multiple deficiency syndrome. There are no real body stores of riboflavin. Daily requirement is 1.96 mg per 1000 kcal of energy intake. 81Applied Community Health Education

3) NIACIN (VIT-B3) Niacin or nicotinic acid (B3) is essential for the metabolism of carbohydrate, fat and protein. It is also essential for the normal functioning of the skin, intestinal and nervous system. This vitamin differ from other B-complex froup is that an essential amino acid, tryptophan serves as its precursor. Another characteristic of niacin is that it is not excreted in urine. Sources of Niacin Foods rich in niacin or tryptophan are liver, kidney meat, poultry, fish, legumes and groundnut. In many cereals, especially maize, niacin occurs in “bound” form unavailable to the consumer. Deficiency Niacin deficiency results in pellagra. The disease is characterized by the D’s – diarrhea, dermatitis and dementia. In addition, ssitis and stomatitis usually occur. The dermatitis is bilaterally symmetrical and is found only ln those surfaces of the body exposed to sunlight, such as back of the hands, lower legs, face and neck. Mental changes may also occur in which include depression, irritability and delirium. The recommended daily allowance is 12 mg per day of energy intake. 4) PANTOTHENIC ACID (VIT-B5) There is long-standing evidence for a relation between pantothenic acid and adrenal cortical function. Work indicates a more specific role for pantothenic acid in the biosynthesis of corticosteroids. Human blood normally contains 18 to 35 mg of pantothenic acid per 100 ml, mostly present in the cells as coenzyme A. The daily requirement is set at 5 mg. All foods contribute to dietary intake. About 3 mg are excreted daily in urine. 5) PYRIDOXINE (VIT-B6) Pyridoxine (Vitamin B6) is a water soluble vitamin essential for amino acid metabolism, neurotransmitter synthesis, hemobin production, and immune function. It is widely available in foods, so deficiency is uncommon, but requirements vary by age, sex, and physiological state. Vitamin B6 refers to a group of compounds like pyridoxine, pyridoxal, and pyridoxamine, 82Applied Community Health Education

which are converted in the body to the active coenzyme form pyridoxal 5′ phosphate (PLP). PLP is involved in over 100 enzymatic reactions, mainly related to protein metabolism. Sources of Pyridoxine • Animal sources: Poultry (chicken, turkey), fish (salmon, tuna), liver, eggs. • Plant sources: Whole grains, legumes, bananas, potatoes, spinach, fortified cereals. • Other: Nuts and seeds. Deficiency Although rare, deficiency can occur due to malnutrition, alcoholism, chronic illness, or certain medications (e.g., isoniazid, hydralazine, penicillamine). Symptoms include Peripheral neuropathy (numbness, tingling), Seizures (especially in infants), Anemia (sideroblastic or microcytic), Skin changes (seborrheic dermatitis, ssitis, cheilitis), Confusion, irritability, depression. Functions • Neurotransmitter synthesis (serotonin, dopamine, GABA). • Hemobin formation. • Regulation of homocysteine levels (important for heart health). • Immune system support. 6) BIOTIN (VIT-B7) Biotin, also known as Vitamin B7 or Vitamin H, is a water soluble vitamin belonging to the B complex group. It acts as a coenzyme in carboxylation reactions, crucial for metabolism of carbohydrates, fats, and proteins. Biotin plays a key role in: • Energy production (via gluconeogenesis and fatty acid synthesis). • Maintaining healthy hair, skin, and nails. • Supporting nervous system function. 83Applied Community Health Education

Sources of Biotin • Animal sources: Egg yolk, liver, kidney, salmon, pork. • Plant sources: Nuts (almonds, walnuts), seeds, soybeans, legumes, whole grains. • Vegetables & Fruits: Spinach, broccoli, sweet potatoes, bananas. • Other: Brewer’s yeast. Note: Raw egg whites contain avidin, a protein that binds biotin and prevents absorption. Deficiency Biotin deficiency is rare because it is widely available in foods and also produced by gut bacteria. However, it can occur due to: • Long-term consumption of raw egg whites. • Genetic disorders (biotinides deficiency). • Prolonged use of anticonvulsant drugs. • Parenteral nutrition without supplementation. • Symptoms include with Hair loss (alopecia), Skin rashes (seborrheic dermatitis), Brittle nails, Neurological issues: depression, lethargy, hallucinations, numbness, tingling. 7) FOLATE (VIT-B9) The recommended name is folate, alternative name is folacin and the usual pharmaceutical preparation is folic acid. Folic acid occurs in food in two forms: free folates and bound folates. The total folates represent both the groups. In man, free folate is rapidly absorbed, primarily from the proximal part of small intestine. The availability of bound folate is uncertain. Folic acid plays a role in the synthesis of the nucleic acids (which constitute the chromosomes). It is also needed for the normal development of blood cells in the marrow. Sources of Folate The name comes from the Latin folia (leaf) but foods such as liver, meat, dairy products, eggs, milk, fruits and cereals are as good dietary sources as leafy vegetables. Overcooking destroys much of folic acid and thus contributes to folate deficiency in man. Folate deficiency has been reported in babies given milk foods subjected to heat sterilization. 84Applied Community Health Education

Deficiency Folate deficiency may occur simply from a poor diet. It is commonly found in pregnancy and lactation where requirements are increased. It results in megaloblastic anaemia, ssitis, cheilosis and gastrointestinal disturbances such as diarrhoea, distension and flatulence. Severe folate deficiency may cause infertility or even sterility. There is also evidence that the administration of folic acid antagonists (e.g., alcohol, pyrimethamine, and cotrimoxazole) in early pregnancy may produce abortions or congenital malformations. The laboratory diagnosis of folate deficiency is based on measurement of serum and red cell folate concentrations, usually by microbiological assay. Requirement Body stores of folate are not large, about 5-10 mg, and therefore, folate deficiency can develop quickly. Folic acid requirements are greatest in conditions where there is rapid cell multiplication, such as during growth in young children and during pregnancy (41). Folic acid supplementation during pregnancy has been found to increase the birth weight of infants and decrease the incidence of low birth weight babies. 8) COBALAMIN (VIT-B12) Vitamin B12, is complex organo-metallic compound with a cobalt atom. The preparation which is therapeutically used is cyanocobalmin, which is relatively cheap. Vitamin B12 cooperates with folate in the synthesis of DNA, so deficiency of either leads to megaloblastosis. Vitamin B, has a separate biochemical role, unrelated to folate, in synthesis of fatty acids in myelin (19). The physiological mechanism for its absorption requires intrinsic factor from the stomach, and the complex is absorbed only at a special site in the terminal ileum. Sources of Cobalamin Good sources are liver, kidney, meat, fish, eggs, milk and cheese Vitamin B_{12} is not found in foods of vegetable origin. It is also synthesized by bacteria in colon. Unlike folic acid, vitamin B_{12} is relatively heat stable. Liver is the main storage site of Vitamin B 12 deg About 2 mg are stored in liver, and another 2 mg elsewhere in the body. These stores are sufficient to tide over any deficiency for one to three years. Because of these reserves, deficiency of vitamin B_{12} appears to be rare. 85Applied Community Health Education

Deficiency Vitamin B12 deficiency is associated with megaloblastic anemia (pernicious anemia), demyelinating neurological lesions in the spinal cord and infertility (in animal species); which is rarely seen in India. While clinical deficiency of B_{12} is not manifested, sub-clinical deficiency is reported to exist in India. Reports indicate that there exist more than 30 per cent deficiency in adults and children in the country. It is not surprising that blood levels of vitamin B12 are low, since a large proportion of population depends on plant food for nutrients (9). Requirement Intake values recommended by ICMR (2020) are as below. Detailed requirements are as under. Normal adults ….. 2.2 mcg Pregnancy ….. +0.25 mcg Lactation ….. +1.0 mcg Infants & children ….. 1.2 mcg 9) ASCORBIC ACID (VIT-C) Vitamin C (ascorbic acid) is a water-soluble vitamin, It is the most sensitive of all vitamins to heat. Man, monkey and guinea pig are perhaps the only species known to require vitamin C in their diet. Sources of Ascorbic acid The main dietary sources of vitamin C are fresh fruits and green leafy vegetables. Traces of vitamin C occur in fresh meat and fish but scarcely in cereals. Germinating pulses contain good amounts. Roots and tubers contain small amounts. Amla or the Indian gooseberry is one of the richest sources of vitamin C both in the fresh as well as in the dry condition. Guavas are another cheap but rich source of this vitamin. The dietary sources of vitamin C are as under: 86Applied Community Health Education

Dietary sources of vitamin C Fruits : mg/100g Vegetables : mg/100g Amla ….. 600 Cabbage ….. 124 Guava ….. 212 Amaranth ….. 99 Lime ….. 63 Cauliflower ….. 56 Orange ….. 30 Spinach ….. 28 Tomato ….. 27 Brinjal ….. 12 Germinated pulses : Potatoes ..… 17 Bengal gram ….. 16 Radish .….. 15 Deficiency Deficiency of vitamin C results in scurvy, the signs of which are swollen and bleeding gums, subcutaneous bruising or bleeding into the skin or Joints, delayed wound healing, anemia and weakness. Scurvy which was once an important deficiency disease is no longer a disease of world importance. Requirement The estimated requirement for vitamin C is 40 mg per day for adults. The normal body when fully saturated contains about 5 g of vitamin C. Functions Vitamin C is a potent antioxidant and has an important role to play in tissue oxidation. It is needed for the formation of collagen, which accounts for 25 per cent of total body protein. Collagen provides a supporting matrix for the blood vessels and connective tissue, and for bones and cartilage. That explains why in vitamin C deficiency this support fails, with the result that local hemorrhages occur and the bones fracture easily. Vitamin C, by reducing ferric iron to ferrous iron, facilitates the absorption of iron from vegetable foods. It inhibits nitrosamine formation by the intestinal mucosa. Other claims such as prevention of common cold and protection against infections are not substantiated. 87Applied Community Health Education

MINERALS More than 50 chemical elements are found in the human body, which are required for growth, repair and regulation of vital body functions. These can be divided into three major groups: a) Major minerals: These include calcium, phosphorus, sodium, potassium and magnesium. b) Trace elements: These are elements required by the body in quantities of less than a few milligrams per day, e.g. iron, iodine, fluorine, zinc, copper cobalt, chromium, manganese, molybdenum, selenium, nickel, tin, silicon and vanadium. Many more have been added to the list in the last few years. c) Trace contaminants with no known function: These include lead, mercury, barium, boron, and aluminum. Only a few mineral elements (e.g., calcium, phosphorus, potassium, sodium, iron, fluorine, iodine) are associated with clearly recognizable clinical situations in man. For none of the other elements do we know with any certainty for their metabolic roles, and much less the clinical effects of dietary insufficiency. The bio-availability of minerals such as iron and zinc may be low in a total vegetarian diet because of the presence of substances such as phytic acid. Besides, large amounts of dietary fibre may interfere with proper absorption. Man is not likely to suffer from trace element deficiencies as long as he is omnivorous. Surveys have shown that mineral deficiencies are no greater among vegetarians than among non-vegetarians. In fact, man’s need for trace elements has not yet been precisely determined. Trace elements should not be used as dietary supplements, since excessive amounts can have injurious effects. 3.1.2 DIETETICS Definition Dietetics is the science and art of applying nutrition principles to the planning and regulation of diets for health promotion, disease prevention, and therapeutic management. It connects nutrition knowledge with practical meal planning for individuals and communities. 88Applied Community Health Education

Scope of Dietetics • Health Promotion: Designing balanced diets to maintain wellness. • Disease Prevention: Preventing nutritional deficiencies and lifestyle- related disorders. • Therapeutic Application: Modifying diets to aid in the treatment of medical conditions. • Community Nutrition: Addressing public health concerns through dietary education and programs. • Food Service Management: Ensuring safe, nutritious, and cost-effective meals in institutions. Branches of Dietetics 1. Clinical Dietetics • Focuses on patients in hospitals or clinics. • Involves therapeutic diets for conditions like diabetes, hypertension, renal disease, and obesity. 2. Community Dietetics • Works at the population level. • Includes nutrition education, maternal and child health programs, and school feeding initiatives. 3. Food Service Dietetics • Concerned with planning, preparing, and supervising meals in institutions (schools, hospitals, canteens). • Ensures food safety, hygiene, and balanced nutrition. Role of Dietitians Dietitians are qualified professionals who provide scientific guidance on food, nutrition, and dietary management. They play an important role in promoting health, preventing nutritional deficiencies, and managing various diseases through appropriate dietary interventions. The major roles of dietitians include: 89Applied Community Health Education

1) Assessment of Nutritional Needs: Dietitians assess the nutritional requirements of individuals and groups by considering factors such as age, sex, body weight, physical activity, health status, and lifestyle. 2) Development of Personalized Diet Plans: They prepare individualized diet plans according to the person’s age, nutritional requirements, health condition, lifestyle, food habits, and specific dietary needs. 3) Nutritional Counseling: Dietitians provide counseling and education for healthy eating, weight management, chronic diseases, nutritional deficiencies, and other special dietary conditions. 4) Therapeutic Dietary Management: They recommend suitable therapeutic diets to support the management and treatment of various diseases and health conditions. 5) Collaboration with Healthcare Teams: Dietitians work in collaboration with physicians, nurses, pharmacists, and other healthcare professionals, particularly in hospitals and healthcare institutions, to provide comprehensive patient care. 6) Health and Nutrition Education: They educate individuals, families, and communities about balanced diets, healthy food choices, food safety, and preventive nutrition. Components of Dietetics Dietetics is the practical application of the principles of nutrition in the planning and management of diets for individuals and groups. The major components of dietetics include: 1) Therapeutic Diets and Nutritional Counseling: Therapeutic diets are specially planned diets modified according to the nutritional and medical requirements of a patient. Nutritional counseling helps individuals understand appropriate food choices and dietary practices for maintaining or improving health. 2) Diet During Energy Imbalance: Dietary management is required when there is an imbalance between energy intake and energy expenditure. It includes: • Low-energy diets: Recommended for overweight and obesity when medically appropriate. 90Applied Community Health Education

• High-energy diets: Used when increased energy intake is required, such as in undernutrition, recovery from illness, or increased nutritional requirements. 3) Diet for Diabetes Mellitus: The diet for diabetes mellitus focuses on appropriate control of carbohydrate intake, adequate dietary fibre, suitable protein and fat intake, portion control, and regular meal timing to support healthy blood glucose levels. 4) Diet for Cardiovascular Diseases: Dietary management is important in conditions such as coronary heart disease (CHD) and hyperlipidemia. The diet generally emphasizes appropriate energy intake, increased fruits and vegetables, whole grains and fibre, and appropriate types and amounts of dietary fats and sodium. 5) Diet for Kidney Diseases: Dietary requirements vary according to the type and severity of kidney disease. Conditions such as nephrotic syndrome and chronic kidney disease may require modification of protein, sodium, potassium, phosphorus, fluids, and energy according to individual clinical needs. 6) Diet for Gastrointestinal Diseases Dietary management is useful in gastrointestinal conditions such as diarrhoea and constipation. The diet is modified according to the condition, severity of symptoms, hydration status, and individual tolerance. 7) Diet for Liver Diseases: Patients with liver diseases such as cirrhosis and hepatitis may require dietary modifications to ensure adequate energy and nutrient intake while managing complications and maintaining nutritional status. 8) Diet for Infections and Fevers: During infections and fever, nutritional requirements may change. Adequate fluids, energy, protein, vitamins, and minerals are important to support recovery, depending on the individual’s condition and ability to eat. 9) Diet in Other Health Conditions: Special dietary management may also be required in conditions such as HIV/AIDS, gout, arthritis, cancer, and burns. The diet is planned according to the specific nutritional requirements, disease status, treatment, and stage of recovery. 91Applied Community Health Education

3.2 CLASSIFICATION OF FOODS Foods can be classified in different ways depending on their origin, chemical composition, predominant function, and nutritive value. The major methods of classification are as follows: 1. Classification by Origin Based on their source or origin, foods are broadly classified into two groups: a) Foods of Animal Origin: These are foods obtained from animals and include milk, meat, poultry, fish, eggs, and other animal products. b) Foods of Vegetable Origin: These are foods obtained from plants and include cereals, pulses, vegetables, fruits, nuts, oilseeds, roots, tubers, and other plant products. 2. Classification by Chemical Composition Foods can also be classified according to the major nutrients and chemical substances they contain. The main groups include: a) Proteins b) Fats c) Carbohydrates d) Vitamins e) Minerals Water is also an essential component of the diet and is required for maintaining normal body functions. 3. Classification by Predominant Function According to their major function in the body, foods are classified into three groups: a) Body-Building Foods: These foods are rich in proteins and support growth, development, tissue formation, and repair. Examples include milk, meat, poultry, fish, eggs, pulses, nuts, and oilseeds. 92Applied Community Health Education

b) Energy-Giving Foods: These foods primarily provide energy required for physical activity, metabolism, growth, and maintenance of body functions. Examples include cereals, sugars, roots and tubers, fats, and oils. c) Protective Foods: These foods are rich in vitamins, minerals, fibre, and other beneficial nutrients. They help maintain normal body functions and protect the body against nutritional deficiencies and diseases. Examples include vegetables, fruits, and milk. 4. Classification by Nutritive Value Based on their nutritive value and common dietary use, foods may be classified into the following groups: a) Cereals and Millets: Includes rice, wheat, maize, oats, barley, and millets such as pearl millet and finger millet. They are important sources of carbohydrates and provide energy. b) Pulses (Legumes): Includes lentils, chickpeas, peas, beans, and other legumes. They are important sources of plant proteins and also provide carbohydrates, fibre, vitamins, and minerals. c) Vegetables: Includes leafy vegetables, roots, tubers, and other vegetables. They provide vitamins, minerals, fibre, and various protective nutrients. d) Nuts and Oilseeds: Includes almonds, groundnuts, walnuts, sesame seeds, sunflower seeds, and other oilseeds. They provide fats, proteins, energy, vitamins, and minerals. e) Fruits: Fruits provide vitamins, minerals, dietary fibre, water, and naturally occurring sugars. They contribute significantly to a healthy and balanced diet. f) Animal Foods: Includes milk, meat, poultry, fish, and eggs. These foods provide high-quality proteins and various vitamins and minerals. g) Fats and Oils: Includes vegetable oils, butter, and other edible fats. They are concentrated sources of energy and also help in the absorption of fat-soluble vitamins. 93Applied Community Health Education

h) Sugar and Jaggery: These foods primarily provide carbohydrates and energy. They should generally be consumed in moderation. i) Condiments and Spices: Includes salt, pepper, turmeric, cumin, coriander, ginger, and other spices and condiments. They mainly improve the flavour, aroma, and palatability of food and may also contribute small amounts of nutrients and bioactive compounds. j) Miscellaneous Foods: This group includes foods and beverages that do not fall conveniently into the above categories, depending on the classification system being used. 3.3 BALANCED DIET A diet may be defined as the kinds of food on which a person or group lives. A balanced diet is defined as one which contains a variety of foods in such quantities and proportions that the need for energy, amino acids, vitamins, minerals, fats, carbohydrate and other nutrients is adequately met for maintaining health, vitality and general well-being and also makes a small provision for extra nutrients to withstand short duration of leanness. A balanced diet has become an accepted means to safeguard a population from nutritional deficiencies. Principles for Constructing a Balanced Diet In constructing a balanced diet, the following principles should be borne in mind: • Inclusion of non-starchy fresh vegetables and green leafy vegetables in every meal. Take at least 30 grams of fruits in every meal. • Consuming at least 50% of cereals and other grains as whole grains (minimally polished) for adequate nutrients and fibre. • All cereal (or millet) based diets are accompanied with adequate pulses or beans for good quality protein and fibre. • Consuming adequate quantities of nuts, oilseeds, fatty fish and restricting cooking oils to 25g to 30g per day. • Restricting meal frequency to two to three times a day. • Avoiding ultra-processed foods (UPFs) and foods high in fat, sugar and salt (HFSS). 94Applied Community Health Education

• Avoiding sugar or restricting to 20g to 25g per day (adults). • Not snacking in between and consuming healthy beverages. The Food Guide Pyramid The food guide pyramid is a visual representation (in the shape of a pyramid) of the optimal number of servings of food a person should eat daily from each basic group. It was first evolved in the 1970s in Sweden. Later, in the year 2005, it was revised to create what is called My Pyramid. My Pyramid was replaced by My Plate in the year 2011. The food pyramid for balanced diet, for 2000 kcal, recommended by ICMR. Levels of the food pyramid (for 2000 kcal): • Vegetables (400g) and Fruits (100g) — base • Cereals and Nutri cereals (250g) • Milk/curd (300ml), Pulses and legumes (85g) [30g of pulses can be substituted with fish/flesh foods] • Nuts and seeds (35g), Fats and oils (27g) — apex 95Applied Community Health Education

Categories of Food Groups S.No. Food Group Examples 1. Cereals and millets Rice, wheat, millets and other cereals 2. Pulses Lentil, green gram, chickpea, rajma, cowpea, etc. 3. Vegetables Seasonal vegetables 4. Nuts, oil seeds, oils and fats Peanuts, walnuts, almonds, pistachio, hazel nuts, vegetable oils, etc. 5. Green leafy vegetables (GLV) Seasonal GLVS 6. Fruits Seasonal fruits 7. Dairy Milk, curd and butter milk 8. Roots and tubers Beetroot, radish, carrot, tapioca, sweet potato, etc. 9. Flesh foods Marine fish, poultry and lean cut meat 10. Spices and herbs Turmeric (haldi), ginger, mustard, pepper, cumin, coriander (dhania), etc. Adequate quantities of foods from at least 5–7 food groups should be consumed on a daily basis. Other foods may be consumed at least two to three times a week. 96Applied Community Health Education

Dietary Goals (WHO Recommendations) All countries should develop a national nutrition and food policy setting out “dietary goals” for achievement. The dietary goals (“prudent diet”) recommended by various Expert Committees of WHO are as below: • Dietary fat should be limited to approximately 15–30 per cent of total daily intake. • Saturated fats should contribute no more than 10 per cent of the total energy intake; unsaturated vegetable oils should be substituted for the remaining fat requirement. • Excessive consumption of refined carbohydrate should be avoided; some amount of carbohydrate rich in natural fibre should be taken • Sources rich in energy such as fats and alcohol should be restricted. • Salt intake should be reduced to an average of not more than 5 g. per day • Protein should account for approximately 10–15 per cent of the daily intake • Junk foods such as colas, ketchups and other foods that supply empty calories should be reduced. 3.4 NUTRITIONAL REQUIREMENTS AT DIFFERENT STAGES OF LIFE BASIC CONCEPTS The science of human nutrition is mainly concerned with defining the nutritional requirements for the promotion, protection and maintenance of health in all groups of the population. A variety of terms have been used to define the amount of nutrients needed by the body such as: optimum requirements, minimum requirements, recommended intakes or allowances, and safe level of intake, of these, the term “recommended dietary allowance” (RDA) has been widely accepted. Recommended Dietary Allowance (RDA): The average daily dietary nutrient intake level sufficient to meet the nutrient requirement of nearly all (97–98 per cent) healthy individuals in a particular life stage and gender group. 97Applied Community Health Education

a) Adequate Intake: A recommended average daily intake level based on observed or experimentally determined approximations or estimates of nutrient intake by a group (or groups) of apparently healthy people, that are assumed to be adequate – used when an RDA cannot be determined. In the Indian context, this is referred to as “acceptable intake.” b) Tolerable Upper Intake Level (TUL): The highest average daily nutrient intake level that is likely to pose no risk of adverse health effects for almost all individuals in the general population. As intake increases above the TUL, the potential risk of adverse effect increases. c) Estimated Average Requirement (EAR): The average daily nutrient intake level estimated to meet the requirement of half of the healthy individuals in a particular life stage and gender group. • The RDA is derived from • The individual variability, • The nutrient bioavailability from the habitual diet. d) Energy Requirements The energy requirement of an individual is defined as that level of energy intake from food that balances energy expenditure, when the individual has a body size and composition and level of physical activity, consistent with long-term good health, also allowing for maintenance of economically essential and socially desirable activity. Energy requirements vary from one person to another depending upon inter-related variables acting in a complex way, such as age, sex, working condition, body composition, physical activity, physiological state etc. e) Energy cost of nutrients: Protein — 4 kcal/g Fat — 9 kcal/g Carbohydrate — 4 kcal/g Dietary fibre — 2 kcal/g 98Applied Community Health Education

3.4.1 ENERGY REQUIREMENTS BY AGE GROUP (ICMR 2020 RECOMMENDATIONS) Age/Category Energy (kcal/day) Adult Men — Sedentary 2110 Adult Men — Moderate work 2710 Adult Men — Heavy work 3470 Adult Women — Sedentary 1660 Adult Women — Moderate work 2130 Adult Women — Heavy work 2720 Pregnant women +350 kcal above normal Lactating (0–6 months) +600 kcal above normal Lactating (7–12 months) +520 kcal above normal Infants (0–6 months) 550 Infants (6–12 months) 670 Children (1–3 y) 1010 Children (4–6 y) 1360 Children (7–9 y) 1700 Boys (10–12 y) 2220 Girls (10–12 y) 2060 Boys (13–15 y) 2860 Girls (13–15 y) 2400 Boys (16–18 y) 3320 Girls (16–18 y) 2500 99Applied Community Health Education

a) Vulnerable Groups for Energy • The energy requirements of women are increased by pregnancy (+350 kcal daily throughout pregnancy) and lactation (+600 kcal daily during the first 6 months, and +520 kcals daily during the next 6 months) over and above their normal requirements. • Because of their rapid growth rate, young children require proportionately more energy for each kilogram of body weight than adults. Children above the age of 13 years need as much energy as adults. • The energy requirements decrease with age because of a fall in BMR and a decrease in physical activity in most persons. In general, there is a 2 per cent decline of resting metabolism for each decade for adults. The FAO/WHO committee suggested that after the age of 40 years, requirements should be reduced by 5 per cent for each decade until the age of 60, and by 10 per cent for each decade thereafter. • The ICMR Expert Group has made recommendations for the elderly. It seems reasonable to assume that the requirements of the aged are not less than that for young adults. b) Protein Requirements • Protein requirements vary from individual to individual. Apart from age, sex and other physiological variables, factors like infection, worm infestation, emotional disturbances and stress situations can affect a person’s protein requirement. • The ICMR Expert Group (2020) suggested an intake of 0.88 gram of protein per kg of body weight for adult males and females, assuming a NPU of 65 for the dietary protein. c) Fat Requirements The daily requirement of fat is not known with certainty. During infancy, fats contribute to a little over 50 per cent of the total energy intake. This scales down to about 20 per cent in adulthood. The ICMR Expert Group (2020) has recommended an intake of 20 per cent of the total energy intake as fat, of which at least 50 per cent of fat intake should consist of vegetable oils rich in essential fatty acids. The requirement of essential fatty acids ranges from 3 per cent energy intake to 5.7 per cent of energy intake in young children. 100Applied Community Health Education

d) Carbohydrate Requirements The recommended intake of carbohydrate in balanced diets is placed so as to contribute between 50 to 80 per cent of total energy intake. Most Indian diets contain amounts more than this, providing as much as 90 per cent of total energy than this, which makes the diet imbalanced. This needs to be corrected through nutrition education. Note: For good health, adults should consume minimum of 100 to 130 g of carbohydrates and at least 20 g fats (food sources) 3.4.2 RECOMMENDATIONS FOR DIETARY FAT INTAKE (As per ICMR-2020) Age/Gender Minimum level of Total fat (% E) Fat from foods other than visible fats (% E) Visible fat (% E) Visible fat (g/d) Adult Man — Sedentary 20 10 10 25 Adult Man — Moderate 20 10 10 30 Adult Man — Heavy 20 10 10 40 Adult Woman — Sedentary 20 10 10 20 Pregnant/ Lactating Women 20 10 10 30 Infants (0–6 months) 40–60 — Human milk 25 Children (7–24 months) 35 10 25 25 101Applied Community Health Education

SUMMARY OF RDA-RECOMMENDED DAILY (OR DIETARY) ALLOWANCE FOR INDIANS — 2020 Age Group Category Body Wt (kg) Protein (g/d) Dietary Fibre* (g/d) Calcium (mg/d) Iron (mg/d) Zinc (mg/d) Iodine (μg/ day) Vit A (μg/d) Vit D (IU/d) Men Sedentary 65 54.0 32 1000 19 17 150 1000 600 Women Moderate 55 46.0 32 1000 29 13 150 840 600 Pregnant — 55+10 +9.5– 22.0 — 1000 27 14.5 250 900 600 Lactation 0–6m — — +17.0 — 1200 23 14 280 950 600 Infants 0–6m — 5.8 8.0 — 300 — — 100 350 400 Children 1–3y — 12.9 12.5 15 500 8 3.3 90 510 600 Children 4–6y — 18.3 16.0 20 550 11 4.5 120 630 600 Boys 10–12y — 34.9 32.0 33 850 28 8.5 150 790 600 Boys 13–15y — 50.5 45.0 43 1000 30 12.8 150 1000 600 102Applied Community Health Education

DAILY NUTRIENT RECOMMENDATIONS FOR THE ELDERLY IN INDIA — 2020 Men ≥60 Yrs EAR Men ≥60 Yrs RDA Women ≥60 Yrs EAR Women ≥60 Yrs RDA Energy (Kcal)* 1700 — 1500 — Dietary Fibre — 32 — 25 Protein (gr) 42.9 54.0 36.3 45.7 Calcium (mg) 800 1200 800 1200 Iron (mg) 11 19 11 19 3.4.3 NUTRITIONAL REQUIREMENTS • For Infants The average of birth weight and body weight at 6 months is used for computing the reference body weight for infants 0–6 months of age. For 6–12 months, an average of body weight at 6 months and at 12 months is taken for computation. • For Children 1–3 years of age, an average of body weight at 18 months, 30 months, 42 months of WHO median weight is taken. Children above the age of 13 years need as much energy as adults. This is because they show a good deal of physical activity, almost equal to hard work by adults. There is also an increase in metabolic rate due to the spurt in growth and puberty sets in. • For Adolescents are the second fastest growing age group after infants. Requirements are high due to rapid growth, increased physical activity, and onset of menstruation in girls. • For Adults The energy requirements decrease with age because of a fall in BMR and a decrease in physical activity in most persons. For each decade for adults (from age 40), requirements should be reduced by 5 per cent until the age of 60, and by 10 per cent for each decade thereafter. 103Applied Community Health Education

• For Pregnant women Energy requirement is increased by +350 kcal throughout pregnancy. Protein requirement increases by 1, 9.5 and 22 g/day in 1st, 2nd and 3rd trimesters respectively. Calcium requirement increases to 1000 mg/day. Iron requirement increases to 27 mg/day. Iodine increases to 250 μg/day. Vitamin A increases to 900 μg/day. • During Lactation Energy requirement is increased by +600 kcal (first 6 months) and +520 kcal (7–12 months). Protein requirement increases by 17 g/day (0–6 months). Calcium requirement increases to 1200 mg/ day. 3.5 COMMON NUTRITIONAL DEFICIENCY DISEASES 1. Protein-Energy Malnutrition (PEM) a) Kwashiorkor Kwashiorkor is a severe form of undernutrition, which develops in individuals on diets with a low protein/energy ratio. The main cause is inadequate protein intake and low concentration of essential amino acids. Main symptoms of Kwashiorkor are: • Oedema • Wasting • Liver enlargement • Hypoalbuminaemia • Steatosis • Possible depigmentation of skin and hair b) Marasmus Marasmus is the other form of malnutrition, caused by inadequate intake of both protein and energy. It is a form of severe cachexia with weight loss as a result of wasting in infancy and childhood. Main symptoms of Marasmus are: • Severe wasting, with little or no oedema • Minimal subcutaneous fat 104Applied Community Health Education

• Severe muscle wasting • Non-normal serum albumin levels 2. Xerophthalmia (Vitamin A Deficiency) Xerophthalmia (dry eye) refers to all the ocular manifestations of vitamin A deficiency in man. It is the most widespread and serious nutritional disorder leading to blindness, particularly in South-East Asia. Xerophthalmia is most common in children aged 1–3 years, and is often related to weaning. The younger the child, the more severe the disease. It is often associated with PEM. Mortality is often high in this age group. The States badly affected in India are the southern and eastern States notably Andhra, Tamil Nadu, Karnataka, Bihar and West Bengal — predominantly rice-eating States. Stages of Xerophthalmia • Night blindness (Nyctalopia): This is usually the earliest symptom of vitamin A deficiency. It refers to an inability or reduced ability to see in dim light. It is assessed subjectively by asking about difficulty in seeing in dim light. • Conjunctival xerosis: The conjunctiva becomes dry, rough and loses its shining character. It may look muddy and wrinkled. It has been described as “emerging like sand banks at receding tide.” • Bitot’s spots: Bitot’s spots are triangular, pearly-white or yellowish, foamy spots on the bulbar conjunctiva on either side of the cornea. They are frequently bilateral. Bitot’s spots in young children usually indicate vitamin A deficiency. • Corneal xerosis: The cornea appears dull, dry and non-wettable and eventually opaque. In more severe deficiency there may be corneal ulceration. • Keratomalacia: Keratomalacia or liquefaction of the cornea is a grave medical emergency. The cornea (a part or the whole) may become soft and may burst open. The process is a rapid one. If the eye collapses, vision is lost. • Extra-Ocular Manifestations 105Applied Community Health Education

• These comprise follicular hyperkeratosis, anorexia and growth retardation. Recent studies indicate that even mild vitamin A deficiency causes an increase in morbidity and mortality due to respiratory and intestinal infection. Deficiency of vitamin A has recently been linked to child mortality. Treatment Vitamin A deficiency should be treated urgently. Nearly all of the early stages of xerophthalmia can be reversed by administration of a massive dose (200,000 IU or 110 mg of retinol palmitate) orally on two successive days. All children with corneal ulcers should receive vitamin A whether or not a deficiency is suspected. Prevention Prevention and/or control take two forms: • Improvement of people’s diet so as to ensure a regular and adequate intake of foods rich in vitamin A • Reducing the frequency and severity of contributory factors, e.g., PEM, respiratory tract infections, diarrhoea and measles. A short-term preventive approach that has demonstrated its efficacy is the administration of large doses of vitamin A orally, in recommended doses to vulnerable groups, on a periodic basis — a single massive dose of 200,000 IU of vitamin A in oil (retinol palmitate) orally every 6 months to preschool children (1 year to 6 years), and half that dose (100,000 IU) to children between 6 months and one year of age. 3. Nutritional Anemia Nutritional anemia is a disease syndrome caused by malnutrition in its widest sense. It has been defined by WHO as “a condition in which the hemobin content of blood is lower than normal as a result of a deficiency of one or more essential nutrients, regardless of the cause of such deficiency.” Anemia is established if the hemobin is below the cut- off points recommended by WHO (Table 12). By far the most frequent cause of nutritional anemia is iron deficiency, and less frequently folate or vitamin B₁₂. 106Applied Community Health Education

Nutritional anemia is a worldwide problem with the highest prevalence in developing countries. It is found especially among women of child-bearing age, young children and during pregnancy and lactation. It is estimated to affect nearly two-thirds of pregnant and one-half of non-pregnant women in developing countries. In India, iron deficiency anemia is the most widespread micronutrient deficiency affecting all age groups. As per National Family Health Survey-5 (2019–2021), the prevalence of anaemia in women in 15–49 years age group is about 57 per cent and in men it is much less, about 25.1 per cent. Prevalence of anemia in adolescent girls is very high (72.6%) in India. Detrimental Effects of Anemia • In Pregnancy: Anemia increases the risk of maternal and foetal mortality and morbidity. In India, 19 per cent of maternal deaths were found to be due to anemia. • In Infection: Anemia can be caused or aggravated by parasitic diseases, e.g., malaria, intestinal parasites. Iron deficiency may impair cellular responses and immune functions and increase susceptibility to infection. • In Work capacity: Anemia (even when mild) causes a significant impairment of maximal work capacity. • Interventions • Iron and folic acid supplementation: The Government of India sponsored a National Nutritional Anemia Prophylaxis Programme. The Programme is based on daily supplementation with iron and folic acid tablets to prevent mild and moderate cases of anemia. The beneficiaries are “at risk” groups viz., pregnant women, lactating mothers and children under 12 years. • Iron fortification: Simple addition of ferric ortho-phosphate or ferrous sulphate with sodium bisulphate was enough to fortify salt with iron. Iron fortified salt was found to reduce prevalence of anemia significantly. Other strategies: Changing dietary habits, control of parasites and nutrition education. 107Applied Community Health Education

4. Pellagra (Niacin/Vitamin B₃ Deficiency) Niacin or nicotinic acid (B₃) is essential for the metabolism of carbohydrate, fat and protein. It is also essential for the normal functioning of the skin, intestinal and nervous systems. Niacin deficiency results in pellagra, characterized by the three D’s: • Diarrhoea • Dermatitis — bilaterally symmetrical, found only on those surfaces of the body exposed to sunlight, such as back of the hands, lower legs, face and neck • Dementia — mental changes may include depression, irritability and delirium Pellagra is historically a disease of the maize-eating population. It was reported in India in the Telangana area of Andhra Pradesh in some segments of the population eating jowar (Sorghum vulgare). Studies by Gopalan and others have shown that amino acid imbalance caused by an excess of leucine is the cause of pellagra in both jowar and maize eaters. Prevention: A good mixed diet containing milk and/or meat is universally regarded as an essential part of prevention and treatment. Avoidance of total dependence on maize or sorghum is an important preventive measure. The recommended daily allowance is 12 mg per day of energy intake. 5. Riboflavin Deficiency (Vitamin B₂) The most common lesion associated with riboflavin deficiency is angular stomatitis, which occurs frequently in malnourished children and its prevalence is used as an index of the state of nutrition of groups of children. Other clinical signs suggestive include cheilosis, ssitis, nasolabial dyssebacia, etc. Riboflavin deficiency almost always occurs in association with deficiencies of other B-complex vitamins. Daily requirement: 1.96 mg per 1000 kcal of energy intake. There are no real body stores of riboflavin. Sources: Richest natural sources are milk, eggs, liver, kidney and green leafy vegetables. 108Applied Community Health Education

6. Thiamine Deficiency (Vitamin B₁) — Beriberi Thiamine is essential as a coenzyme in carbohydrate metabolism. Deficiency leads to beriberi, which is the best-known deficiency disease of rice eaters. People subsisting mainly on white or polished rice are prone to beriberi. 7. Iodine Deficiency Disorders (IDD) Iodine deficiency is yet another major nutrition problem in India. Previously, iodine deficiency was equated with goiter. In recent years, it has become increasingly clear that iodine deficiency leads to a much wider spectrum of disorders commencing with the intrauterine life and extending through childhood to adult life with serious health and social implications. SPECTRUM OF IODINE DEFICIENCY DISORDERS Disorders Levels of Severity Goitre Grade I, Grade II, Grade III, Multinodular Hypothyroidism Varying combinations of clinical signs Subnormal intelligence, Delayed motor milestones, Mental deficiency, Hearing defects, Speech defects Variable severity Strabismus (squint) Unilateral / Bilateral Nystagmus — Spasticity, Neuromuscular weakness Muscle weakness in legs, arms, trunk; Spastic diplegia; Spastic quadriplegia Endemic cretinism Hypothyroid cretinism; Neurological cretinism Intrauterine death (spontaneous abortion, miscarriage) — The problem of IDD is of far greater magnitude than one of goitre and cretinism. It is a national problem with grave socio-economic consequences. 109Applied Community Health Education

Requirement: The daily requirement of iodine for adults is placed at 150 micrograms. The recommendations of WHO of 250 mcg per day for iodine during pregnancy have also been adopted. The amount is normally supplied by well-balanced diet and drinking water except in regions where food and water are deficient in iodine. 8. Endemic Fluorosis In many parts of the world where drinking water contains excessive amounts of fluorine (3–5 mg/L), endemic fluorosis has been observed. Endemic fluorosis has been reported to be an important health problem in certain parts of the country, e.g., Andhra Pradesh (Nellore, Nalgonda and Prakasam districts), Punjab, Haryana, Karnataka, Kerala and Tamil Nadu. The toxic manifestations of fluorosis comprise: • Dental fluorosis: Fluorosis of dental enamel occurs when excess fluoride is ingested during the years of tooth calcification — essentially during the first 7 years of life. It is characterized by “mottling” of dental enamel. The teeth lose their shiny appearance and chalk-white patches develop on them. In severe cases, loss of enamel gives the teeth a corroded appearance. • Skeletal fluorosis: Prolonged ingestion of fluorides through drinking water in excess of the daily requirement is associated with dental and skeletal fluorosis. • Fluorine — Deficiency/Excess: Fluorine is often called a two-edged sword. Prolonged ingestion of fluorides through drinking water in excess of the daily requirement is associated with dental and skeletal fluorosis; and inadequate intake with dental caries. The use of fluoride is recognized as the most effective means available for the prevention of dental caries. 9. Scurvy (Vitamin C Deficiency) Vitamin C (ascorbic acid) deficiency causes scurvy, characterized by: • Bleeding gums, loose teeth • Perifollicular haemorrhages • Poor wound healing • Anaemia 110Applied Community Health Education

10. Rickets/Osteomalacia (Vitamin D Deficiency) Vitamin D is the nutritionally important form in man. Deficiency leads to rickets in children and osteomalacia in adults. 3.6 CAUSES, TYPES AND PREVENTION OF MALNUTRITION Definition Malnutrition is an abnormal physiological condition caused by inadequate, unbalanced, or excessive intake of macronutrients and/or micronutrients. TYPES OF MALNUTRITION 1. Undernutrition Undernutrition is identified as a major health and nutrition problem in India. It is not only an important cause of childhood morbidity and mortality, but leads also to permanent impairment of physical and possibly, of mental growth of those who survive. The nutrition problem frequently encountered, particularly among the rural poor and urban slums in India are protein-energy malnutrition and micronutrient deficiencies. The term undernutrition encompasses: • Underweight • Stunting (chronic malnutrition) • Wasting (acute malnutrition) 1) Underweight: Underweight, based on weight-for-age, is a composite measure of stunting and wasting, and is recommended as the indicator to assess changes in the magnitude of malnutrition over time. An underweight child has a weight-for-age Z-score that is at least two standard deviations (–2SD) below the median in the World Health Organization (WHO) Child Growth Standards. 2) Stunting: Failure to achieve expected height/length as compared to healthy, well-nourished children of the same age is a sign of stunting. Stunting is an indicator of linear growth retardation that results from failure to receive adequate nutrition over a long period or recurrent infections. It 111Applied Community Health Education

may be exacerbated by recurrent and chronic illness. A stunted child has a height-for-age Z-score that is at least two standard deviations (–2SD) below the median for the WHO Child Growth Standards. Stunting often results in delayed psycho-social and cognitive development and poor school performance. 3) Wasting: Wasting represents a recent failure to receive adequate nutrition and may be affected by recent episodes of diarrhoea and other acute illnesses. Wasting indicates current or acute malnutrition resulting from failure to gain weight or actual weight loss. Causes include inadequate food intake, incorrect feeding practices, disease, and infection or, more frequently, a combination of these factors. A wasted child has a weight- for-height Z-score that is at least two standard deviations (–2SD) below the median for the WHO Child Growth Standards. Severe Acute Malnutrition (SAM) Severe acute malnutrition is defined by very low weight-for-height/length (Z-score below –3SD of the median WHO child growth standards), a mid-upper arm circumference <115 mm, or by the presence of nutritional oedema. SAM increases significantly the risk of death in children under five years of age. Children who are severely wasted are 9 times likely to die than well-nourished children. 2. Micronutrient Malnutrition The term undernutrition also encompasses stunting, wasting and underweight. The nature of the malnutrition burden includes: undernourishment, micronutrient deficiencies (sometimes called “hidden hunger”), and overweight/obesity. 3. Overnutrition Overnutrition (obesity) is another form of malnutrition caused by excessive intake of energy. Obesity may be defined as an abnormal growth of the adipose tissue due to an enlargement of fat cell size (hypertrophic obesity) or an increase in fat cell number (hyperplastic obesity) or a combination of both. 112Applied Community Health Education

Anthropometric Indices for Measuring Malnutrition The three indices — weight-for-age, height/length-for-age, weight-for- height/length — are used to identify three nutrition conditions: underweight, stunting and wasting, respectively. Each of the three nutrition indicators is expressed in standard deviation units (Z-scores) from the median of the reference population: • Weight-for-Age (WFA) • Length-for-Age or Height-For-Age (HFA) • Weight-for-Length or Weight-for-Height (WFH) Early Detection of PEM The first indicator of PEM is under-weight for age. The most practical method to detect this, which can be employed even by field health workers, is to maintain growth charts. These charts indicate at a glance whether the child is gaining or losing weight. Arm circumference: Arm circumference yields a relatively reliable estimation of the body’s muscle mass, the reduction of which is one of the most striking mechanisms by which the body adjusts to inadequate energy intakes. Arm circumference cannot be used before the age of one year; between ages one and five years, it hardly varies. An arm circumference exceeding 13.5 cm is a sign of a satisfactory nutritional status, between 12.5 and 13.5 cm it indicates mild–moderate malnutrition and below 12.5 cm, severe malnutrition. CAUSES OF MALNUTRITION (ECOLOGY OF MALNUTRITION) 1. Dietary Factors 1) Food habits: Food habits are the result of a long historical evolution. They are influenced by custom, religion, food fads and availability. Some common food habits are: 2) Food taboos: Certain nutritious foods like papaya, pineapple, eggs and certain vegetables are avoided by pregnant women in some communities. 3) Religion: Religion has a powerful influence on the food habits of the people. Hindus do not eat beef, and Muslims pork. Some orthodox Hindus do not eat meat, fish, eggs and certain vegetables like onion. 113Applied Community Health Education

4) Food fads: In the selection of foods, personal likes and dislikes play an important part. 5) Cooking practices: Draining away the rice water at the end of cooking, prolonged boiling in open pans, peeling of vegetables, all influence the nutritive value of foods. 6) Child rearing practices: These vary widely from region to region and influence the nutritional status of infants and children. 7) Miscellaneous: In some communities, men eat first and women eat last and poorly. 8) Inadequate dietary intake: The food gap leads to inadequate intake of food both in quantity and quality and leads to infections like diarrhoea, respiratory infections, measles and intestinal worms which increase requirements for calories, protein and other nutrients while decreasing their absorption and utilization. This is a vicious circle — infection contributing to malnutrition and malnutrition contributing to infection, both acting synergistically. 2. Socio-Cultural Factors The food habits vary widely from region to region and are influenced by socio-cultural factors. 3. Socio-Economic Factors Malnutrition is largely the by-product of poverty, ignorance, insufficient education, lack of knowledge regarding the nutritive value of foods, inadequate sanitary environment, large family size, etc. These factors bear most directly on the quality of life and are the true determinants of malnutrition in society. The speed with which populations are growing in many developing countries is another important factor. In short, the causes of malnutrition are built into the very nature of society, in the socio- economic and political structures, both nationally and internationally. Food Production Increased food production should lead to increased food consumption. The average Indian has 0.6 hectare of land surface compared to 5.8 hectare per head in the developed countries. The per capita arable land for an average Indian is only 0.3 hectare. Yields per hectare are only about one-fourth of those achieved in the industrialized countries. 114Applied Community Health Education

4. Health and Other Services Factors The health sector can, if properly organized and given adequate resources, combat malnutrition. Some of the remedial actions that can be taken by the health sector are: • Nutritional surveillance: The continuous monitoring in a community or area of factors or conditions which indicate, relate to, or impinge on the nutritional status of individuals or groups of people. • Nutritional rehabilitation: Immediate measures are required as soon as the malnourished subjects are located. • Nutrition supplementation: The target groups are mothers and children. • Health education: By appropriate educational action, about 50 per cent of nutritional problems can be solved. PREVENTION OF MALNUTRITION a) Health Promotion Measures directed to pregnant and lactating women (education, distribution of supplements) • Promotion of breast-feeding • Development of low-cost weaning foods • Measures to improve family diet • Nutrition education — Promotion of correct feeding practices • Home economics • Family planning and spacing of births • Family environment b) Specific Protection The child’s diet must contain protein and energy rich foods. Milk, eggs, fresh fruits should be given if possible. Immunization Food fortification 115Applied Community Health Education

c) Early Diagnosis and Treatment • Periodic surveillance • Early diagnosis of any lag in growth • Early diagnosis and treatment of infections and diarrhea • Development of programmes for early rehydration of children with diarrhea • Development of supplementary feeding programmes during epidemics • Deworming of heavily infested children d) Rehabilitation • Nutritional rehabilitation services • Hospital treatment • Follow-up care Preventive and Social Measures Since malnutrition is the outcome of several factors, the problem can be solved only by taking action simultaneously at various levels — family, community, national and international levels. It requires a coordinated approach of many disciplines — nutrition, food technology, health administration, health education, marketing, etc. Action at the Family Level The principal target of nutritional improvement in the community is the family, and the instrument for combating malnutrition at the family level is nutrition education. Action at the Community Level Action at the community level should commence with the analysis of the nutrition problem in terms of: • The extent, distribution and types of nutritional deficiencies • The population groups at risk • The dietary and non-dietary factors contributing to malnutrition. 116Applied Community Health Education

Action at the National Level The ninth Report of the Joint FAO/WHO Expert Committee on Nutrition (1976) suggested several new approaches and strategies for action at the national level. Some of the strategies and approaches undertaken at the national level in India are: • Rural development • Increasing agricultural production • Stabilization of population • Nutrition intervention programmes • Nutrition related health activities Action at the International Level Several international agencies such as the FAO, UNICEF, WHO, World Bank, UNDP, and CARE are working in close collaboration helping the national governments in different parts of the world in their battle against malnutrition. Malnutrition-Infection Cycle Malnutrition and infection act synergistically. Inadequate dietary intake leads to: • Appetite loss, Nutrient loss, Malabsorption, Altered metabolism — which lead to Weight loss, Growth faltering, Immunity lowered, Mucosal damage — which leads to Disease: incidence, duration and severity • Disease in turn leads back to inadequate dietary intake, completing the vicious circle. 3.7 FOOD ADULTERATION AND SAFETY 1. FOOD ADULTERATION Adulteration of foods is an age-old problem. It consists of a large number of practices, e.g., mixing, substitution, concealing the quality, putting up decomposed foods for sale, misbranding or giving false labels and addition of toxicants. Adulteration results in two disadvantages for the consumer: 117Applied Community Health Education

first, he is paying more money for a foodstuff of lower quality; secondly, some forms of adulteration are injurious to health, even resulting in death, as for example, adulteration of mustard oil with argemone oil causing epidemic dropsy or adulteration of edible oils with tricresyl phosphate (TCP) resulting in paralysis and death. Table of Common Adulterants Food material Common adulterants Cereals such as wheat, rice Mud, grits, soapstone bits Dals Coal-tar dyes, khesari dal Haldi (Turmeric) powder Lead chromate powder Dhania powder Starch, cow dung or horse dung powder Black pepper Dried seeds of papaya Chilli powder Saw dust, brick powder Tea dust/leaves Blackgram husk, tamarind seeds powder, saw dust, used tea dust Coffee powder Date husk, tamarind husk, Chicory Asafoetida (Hing) Sand, grit, resins, gums Mustard seeds Seeds of prickly poppy-Argemone Edible oils Mineral oils, argemone oil Butter Starch, animal fat Ice-cream Cellulose, starch, non-permitted colours Sweetmeats Non-permitted colours Fresh green peas in packing Green dye Milk Extraction of fat, addition of starch and water Ghee Vanaspati 118Applied Community Health Education

3.7.1 FOOD TOXICANTS A. Food-borne Intoxications a) Neurolathyrism: The cause of neurolathyrism is a toxin, Beta oxalyl amino alanine (BOAA) which is found in the seeds of the pulse, L.sativus (Khesari dhal). Neurolathyrism is a public health problem in certain parts of the country where this pulse is eaten. b) Aflatoxins: Aflatoxins are a group of mycotoxins produced by certain fungi, Aspergillus flavus and A. parasiticus. These fungi infest foodgrains such as groundnut, maize, parboiled rice, sorghum, wheat, rice, cotton seed and tapioca under conditions of improper storage, and produce aflatoxins of which B₁ and G₁ are the most potent hepatotoxins, in addition to being carcinogenic. The most important factors affecting the formation of the toxin are moisture and temperature. Moisture levels above 16 per cent and temperatures ranging from 11 to 37°C favour toxin formation. Aflatoxicosis is quite a public health problem in India. The latest report (1975) of 400 cases of aflatoxin poisoning including 100 deaths from Banswada and Panchmahal districts of Rajasthan and Gujarat respectively highlight the problem in India. c) Ergot: Unlike Aspergillus, ergot is not a storage fungus, but a field fungus. Foodgrains such as bajra, rye, sorghum, and wheat have a tendency to get infested during the flowering stages by the ergot fungus (Claviceps purpurea). Fungus grows as a blackish mass and the seeds become black and irregular and are harvested along with food grains. Consumption of ergot infested grain leads to ergotism. The symptoms are acute but rarely fatal and include nausea, repeated vomiting, giddiness and drowsiness extending sometimes for periods upto 24 to 48 hours after the ingestion of ergoty grain. In chronic cases, painful cramps in limbs and peripheral gangrene due to vasoconstriction of capillaries have been reported. The upper safe limit for the ergot alkaloids has been estimated to be 0.05 mg per 100 grams of the food material. d) Epidemic Dropsy: The cause of epidemic dropsy was not known until 1926, when Sarkar ascribed it to the contamination of mustard oil with argemone oil. The toxic substance interferes with the oxidation of pyruvic acid which accumulates in the blood. The symptoms of epidemic dropsy consist of sudden, non-inflammatory, bilateral swelling of legs, often 119Applied Community Health Education

associated with diarrhoea. Dyspnea, cardiac failure and death may follow. Some patients may develop glaucoma. The disease may occur at all ages except breast-fed infants. The mortality varies from 5–50 per cent. Tests for argemone oil: (1) Nitric acid test; (2) Paper chromatography test. e) Endemic Ascites: In Kusmi Block of Sarguja district in Madhya Pradesh during 1973 and again during 1976, an outbreak of rapidly developing ascites and jaundice was reported among the Nagesia tribals. Studies by the National Institute of Nutrition, Hyderabad showed that the local population subsist on the millet Panicum miliare (known locally as Gondhli) contaminated with weed seeds of Crotalaria (locally known as Jhunjhunia). Jhunjhunia seeds were found to contain pyrrolizidine alkaloids which are hepatotoxins. f) Fusarium Toxins: Fusarium species of field fungi are known to contaminate food crops and pose health hazards to livestock and man. The problem of fusarium contamination of sorghum is believed to be on the increase. Rice is also known to be a good substrate for fusarium. B. Food-borne Infections Group Examples of illness (1) Bacterial diseases Typhoid fever, Paratyphoid fever, Salmonellosis, Staphylococcal intoxication, C. perfringens illness, Botulism, B. cereus Food Poisoning, E. coli diarrhoea, Non-cholera vibrio illness, V. parahaemolyticus infection, Streptococcal infection, Shigellosis, Brucellosis (2) Viral diseases Hepatitis A and E, Norovirus, Gastroenteritis, Rotavirus (3) Parasites Taeniasis, Hydatidosis, Trichinosis, Ascariasis, Amoebiasis, Oxyuriasis 3.7.2 FOOD ADDITIVES The concept of adding “non-food” substances to food products is not new. Pickling is an ancient culinary practice aimed at preserving food articles. Food additives are defined as non-nutritious substances which are added intentionally to food, generally in small quantity, to improve 120Applied Community Health Education

its appearance, flavour, texture or storage properties. This definition also includes animal food adjuncts which may result in residues in human food and components of packing materials which may find their way into food. Food additives may be classified into two categories: • First category: Include colouring agents (e.g., saffron, turmeric), flavouring agents (e.g., vanilla essence), sweeteners (e.g., saccharin), preservatives (e.g., sorbic acid, sodium benzoate), acidity imparting agents (e.g., citric acid, acetic acid), etc. • Second category: Are, strictly speaking, contaminants — incidental through packing, processing steps, farming practices (insecticides) or other environmental conditions. Uncontrolled or indiscriminate use of food additives may pose health hazards among consumers. For example, certain preservatives such as nitrites and nitrates can lead to the production of toxic substances, e.g., nitrosamines that have been implicated in cancer etiology. The use of food additives is subjected to government regulations throughout the world. In India two regulations govern the rules and regulations of food additives — the Prevention of Food Adulteration Act and the Fruit Products Order. 3.7.3 FOOD FORTIFICATION Fortification of food is a public health measure aimed at reinforcing the usual dietary intake of nutrients with additional supplies to prevent/ control some nutritional disorders. WHO has defined “food fortification” as “the process whereby nutrients are added to foods (in relatively small quantities) to maintain or improve the quality of the diet of a group, a community, or a population.” Programmes of demonstrated effectiveness of fortification of food or water are: fluoridation of water as a preventive of dental caries; iodization of salt for combating the problem of endemic goiter, and food fortification (e.g., vanaspati, milk) with vitamins A and D. Technology has also been developed for the twin fortification of salt with iodine and iron. Criteria for Food Vehicles Suitable for Fortification • The vehicle fortified must be consumed consistently as part of the regular daily diet by the relevant sections of the population or total population. 121Applied Community Health Education

• The amount of nutrient added must provide an effective supplement for low consumers of the vehicle, without contributing a hazardous excess to high consumers. • The addition of the nutrient should not cause it to undergo any noticeable change in taste, smell, appearance, or consistency. • The cost of fortification must not raise the price of the food beyond the reach of the population in greatest need. Prevention of Food Adulteration Act, 1954 Enacted by the Indian Parliament in 1954, with the objective of ensuring pure and wholesome food to the consumers and to protect them from fraudulent and deceptive trade practices, the Prevention of Food Adulteration (PFA) Act was amended in 1964, 1976 and lately in 1986 to make the Act more stringent. A minimum imprisonment of 6 months with a minimum fine of Rs.1,000 is envisaged under the Act for cases of proven adulteration, whereas for the cases of adulteration which may render the food injurious to cause death or such harm which may amount to grievous hurt (within the meaning of section 320 of I.P.C.) the punishment may go up to life imprisonment and a fine which shall not be less than Rs.5,000. With the amendment in 1986, the consumer and the voluntary organizations have been empowered under the Act to take samples of food. Rules are framed which are revised from time to time by an expert body called the “Central Committee for Food Standards” which is constituted by the Central Government under the provisions of the Act. Any food that does not conform to the minimum standards is said to be adulterated. Although it is a Central Act, its implementation is largely carried out by the State Governments and local bodies in their respective areas. However, the Centre plays a vital role in proper coordination, monitoring and surveillance of the programme throughout the country. Food adulteration is a social evil. The general public, traders, and Food Inspectors are all responsible for perpetuating this evil — the public, because of lack of awareness of the dangers of adulteration and their general disinterest; the traders, for their 122Applied Community Health Education

greed for money; and Food Inspectors who find food adulteration a fertile ground to make easy money. Here the voluntary agencies and consumer guidance societies can play a vital role. 2. FOOD SAFETY FOOD SAFETY AND STANDARDS ACT, 2006 The Food Safety and Standards Act, 2006 was enacted with the objective to consolidate the laws relating to food and for laying down science-based standards for articles of food as well as to regulate their manufacture, storage, distribution, sale and import to ensure availability of safe and wholesome food for human consumption and for matters connected therewith or incidental thereto. The Food Safety and Standards Authority of India (FSSAI) was established in the year 2008. FSS Act 2006 is being implemented by all state’s/UT governments. Food Standards • Codex Alimentarius: The Codex Alimentarius Commission, which is the principal organ of the joint FAO/WHO Food Standards Programme, formulates food standards for international market. The food standards in India are based on the standards of the codex Alimentarius. • PFA Standards: Under the Prevention of Food Adulteration Act (1954), standards have been established which are revised from time to time by the “Central Committee for Food Standards.” The purpose of the PFA standards is to obtain a minimum level of quality of foodstuffs attainable under Indian conditions. • Agmark Standards: These are set by the Directorate of Marketing and Inspection of the Government of India. The Agmark gives the consumer an assurance of quality in accordance with the standards laid down. • Bureau of Indian standards: The ISI mark on any article of food is a guarantee of good quality in accordance with the standards prescribed by the Bureau of Indian Standards for that commodity. The Agmark and ISI standards are not mandatory; they are purely voluntary. They express degrees of excellence above PFA standards. 123Applied Community Health Education

Food Surveillance Food surveillance is essential for the protection and maintenance of community health. Broadly it implies the monitoring of food safety/food hygiene. The WHO has defined food safety/food hygiene as “all conditions and measures that are necessary during the production, processing, storage, distribution and preparation of food to ensure that it is safe, sound, wholesome and fit for human consumption.” The Declaration of Alma-Ata considered food safety as an essential component of primary health care. The importance of surveillance of foodborne diseases has been underlined in the WHO Sixth General Programme of Work for the period 1978–1983. The most important international programme carrying out activities in the field of food hygiene is the Joint FAO/WHO Food Standard Programme. Food Hygiene Food is a potential source of infection and is liable to contamination by microorganisms, at any point during its journey from the producer to the consumer. Food hygiene, in its widest sense, implies hygiene in the production, handling, distribution and serving of all types of food. The primary aim of food hygiene is to prevent food poisoning and other food- borne illnesses. Food Handlers Food sanitation rests directly upon the state of personal hygiene and habits of the personnel working in the food establishments. The infections which are likely to be transmitted by the food handlers are diarrhoea, dysenteries, typhoid and paratyphoid fevers, enteroviruses, viral hepatitis, protozoal cysts, eggs of helminths, streptococcal and staphylococcal infections, and salmonellosis. The first essential is to have complete medical examination carried out of all food handlers at the time of employment. Any person with a history of typhoid fever, diphtheria, chronic dysentery, tuberculosis or any other communicable disease should not be employed. 124Applied Community Health Education

Personal hygiene aspects for food handlers: • Hands: The hands should be clean at all times. Hands should be scrubbed and washed with soap immediately after visiting a lavatory and as often as necessary at other times. Finger nails should be kept trimmed and free from dirt. • Hair: Head coverings should be provided. • Overalls: Clean white overalls should be worn by all food handlers. • Habits: Coughing and sneezing in the vicinity of food, licking the fingers before picking up an article of food, smoking on food premises are to be avoided. 125Applied Community Health Education

CHAPTER -4 Environmental Health and Sanitation 126Applied Community Health Education

Environmental health and sanitation are important components of community health and preventive medicine. Human health is closely influenced by the physical, biological, chemical, and social conditions in which people live. An unhealthy environment can contribute to the spread of communicable diseases, pollution-related illnesses, malnutrition, and other health problems. Environmental health refers to the branch of public health concerned with the assessment and control of environmental factors that can potentially affect human health. These factors include air, water, food, soil, housing, waste, sanitation, climate, noise, and chemical and biological hazards. Sanitation refers to the measures and practices used to maintain a clean and healthy environment and to prevent human contact with harmful agents. It includes the safe disposal of human excreta and waste, provision of safe drinking water, proper sewage disposal, food hygiene, personal hygiene, drainage, and maintenance of clean surroundings. The primary objective of environmental health and sanitation is to prevent disease, promote health, and improve the quality of life of individuals and communities. Poor sanitation and environmental conditions may facilitate diseases such as diarrhoeal diseases, cholera, typhoid, hepatitis, intestinal worm infestations, and vector-borne diseases. Importance of Environmental Health and Sanitation Environmental health and sanitation are essential because they: • Prevent the spread of communicable diseases. • Ensure access to safe and adequate drinking water. • Promote proper disposal of human excreta and solid waste. • Reduce environmental pollution. • Control breeding places of disease vectors such as mosquitoes and flies. • Promote food hygiene and safety. ENVIRONMENTAL HEALTH AND SANITATION 4CHAPTER 127Applied Community Health Education

• Improve housing and living conditions. • Protect communities from chemical, biological, and physical hazards. • Promote healthy and sustainable surroundings. • Improve the overall health and well-being of the population. The major areas of environmental health and sanitation include: • Safe water supply • Sewage and excreta disposal • Solid waste management • Food sanitation and hygiene • Air pollution control • Housing and ventilation • Drainage and wastewater management • Vector control • Noise pollution control • Personal and community hygiene • Occupational and environmental safety • Environmental pollution prevention Thus, environmental health and sanitation form the foundation of disease prevention and health promotion. Effective sanitation practices, combined with community participation, health education, and appropriate environmental management, are essential for creating a safe, healthy, and sustainable community. 4.1. WATER SUPPLY, PURIFICATION, WATER POLLUTION, AND WATER-BORNE DISEASES Water is one of the most essential natural resources for human life and health. The availability of safe, adequate, and wholesome water is fundamental to public health, environmental sanitation, and the prevention of communicable diseases. According to Park, water supply is among the most important environmental health measures in a community. 128Applied Community Health Education

The World Health Organization (WHO) recognizes access to safe drinking water as a fundamental human right. bally, an estimated 2.2 billion people lack access to safely managed drinking water services, resulting in millions of preventable deaths annually, particularly among children under five years. 4.1.1 WATER SUPPLY A. Sources of Water Park classifies sources of water supply into three main categories: rainwater, surface water, and groundwater. Each source has distinct characteristics, advantages, and disadvantages relevant to public health. • Rain Water Rainwater is considered the primary source of all freshwater on Earth, formed by the condensation of atmospheric water vapour. Although inherently soft and relatively free from dissolved minerals, it absorbs atmospheric pollutants, dust particles, smoke, CO₂, SO₂, and microorganisms during its fall. In industrialized areas, acid rain (pH < 5.6) may result from dissolved sulphur and nitrogen oxides. • Surface water Surface water encompasses rivers, lakes, ponds, streams, tanks, and reservoirs. It is the most commonly used source for community water 129Applied Community Health Education

supply because it is available in large quantities. Surface water, however, is easily contaminated by agricultural runoff, industrial effluents, and sewage. Suspended organic matter, silt, and microorganisms are commonly found in untreated surface water. • Groundwater Groundwater is obtained from wells (open wells, tube wells, artesian wells) and springs. As water percolates through soil layers, suspended matter and bacteria are largely removed by natural filtration. However, groundwater may contain excess dissolved minerals such as fluoride (causing fluorosis),arsenic (causing arsenicosis), nitrates, and iron. Groundwater from artesian wells and deep tube wells is generally the most reliably bacteriologically safe. Source Advantages Disadvantages Rainwater Soft; low dissolved solids; relatively pure initially Seasonal; picks up atmospheric contaminants; requires collection infrastructure Surface Water Abundant; accessible; suitable for large communities Easily contaminated; requires full treatment before use Groundwater Low turbidity; low bacterial count; year- round availability May have excess fluoride, arsenic, iron; deep extraction required B. Wholesome Water Wholesome water is defined as drinking water that is free from pathogenic microorganisms and harmful chemical substances, is pleasant in taste and appearance, and is safe for domestic use without risk to health. Characteristics of Wholesome Water Characteristic Parameter Acceptable Limit (WHO/BIS) Physical Colour True colour: ≤5 TCU; Apparent: ≤15 TCU 130Applied Community Health Education

Physical Turbidity ≤1 NTU (desirable); ≤5 NTU (permissible) Physical Taste and Odour Unobjectionable; no threshold odour Physical Temperature ≤25°C preferable Chemical Ph 6.5–8.5 Chemical Total Dissolved Solids ≤500 mg/L (desirable); ≤2000 mg/L (max) Chemical Fluoride 0.5–1.5 mg/L Chemical Arsenic ≤0.01 mg/L (WHO); ≤0.05 mg/L (BIS) Chemical Nitrate ≤45 mg/L (BIS); ≤50 mg/L (WHO) Chemical Lead ≤0.01 mg/L Bacteriological Total Coliform 0 per 100 mL (treated water) Bacteriological E. coli / Thermotolerant Coliforms 0 per 100 Ml Radiological Total Alpha Activity ≤0.5 Bq/L Radiological Total Beta Activity ≤1 Bq/L 4.1.2 PURIFICATION OF WATER Definition Water purification is defined as the process of removing or reducing pathogenic microorganisms and harmful chemical, physical, and biological impurities from water to render it safe for human consumption and domestic use. The main objectives of water purification are: • To remove suspended and colloidal matter • To eliminate pathogenic microorganisms (bacteria, viruses, protozoa, helminths) • To remove objectionable taste, colour, and odour 131Applied Community Health Education

• To prevent the transmission of water-borne diseases • To comply with WHO and national standards for potable water A. Large-Scale (Municipal) Purification of Water The conventional large-scale water treatment process involves a sequential series of steps as described by Park. The steps include storage, sedimentation, filtration, and disinfection. Step 1: Storage and Plain Sedimentation Raw water collected from the source is stored in large reservoirs or settling tanks. During storage, suspended particles heavier than water settle by gravity (plain sedimentation). This process also allows sunlight, temperature changes, oxidation, and biological competition (protozoa consume bacteria) to reduce bacterial load. Plain sedimentation reduces turbidity by 50–70% and bacterial count by up to 90% after prolonged storage. Step 2: Coagulation-Flocculation Fine colloidal particles and very small suspended matter remain in suspension due to electrostatic repulsion and cannot be removed by plain sedimentation. Coagulants such as aluminium sulphate (alum, Al₂(SO₄)₃) are added. Alum reacts with water to form a gelatinous precipitate of aluminium hydroxide [Al(OH)₃], known as a floc, which attracts and enmeshes fine particles, bacteria, and colloids. The floc then settles, carrying these impurities with it. Optimal pH for alum coagulation is 6.8– 7.4. Other coagulants include ferric sulphate and ferric chloride. Step 3: Sedimentation After Coagulation Following coagulation, water passes into sedimentation tanks where floc particles settle by gravity. The settled sludge is periodically removed. This step reduces turbidity, bacterial count, and removes some colour. Step 4: Filtration Filtration is the process of passing pre-treated water through a bed of granular material (sand and gravel) to remove remaining suspended particles, floc, and microorganisms. 132Applied Community Health Education

Two principal types of filters are used in public water supply systems: Slow Sand Filters and Rapid Sand Filters. B. Household (Domestic) Purification When public water supply is unavailable or unreliable, household-level treatment is essential. The following methods are recommended: a) Boiling Boiling is the most reliable household method. Pasteurisation of water occurs at 60°C for 30 minutes, and most pathogens are killed at 100°C within one minute. Rolling boil (vigorous boiling) for at least one minute (three minutes at altitudes >2000 m) effectively destroys bacteria, viruses, and protozoan cysts including Giardia and Cryptosporidium. Boiling does not remove chemical pollutants or heavy metals. b) Chemical Disinfection Bleaching powder [Ca(OCl)Cl] is the most common chemical agent used at household and community level in India. One teaspoon (approximately 5 g) of bleaching powder is dissolved to treat 250 litres of water. Chlorine tablets (Halazone, Aquatabs) provide a measured dose of chlorine. Iodine (2% iodine solution: 5 drops per liter for clear water; 10 drops for turbid water) is used in emergency field conditions. c) Domestic Filters Ceramic candle filters, bio sand filters, and activated carbon filters are commonly used. Point-of-use membrane filters (reverse osmosis, ultrafiltration) are increasingly available in urban settings. All household filters require regular maintenance and cleaning to prevent biofilm formation. 4.1.3 DISINFECTION OF WATER — CHLORINATION Disinfection is the final and most critical step in water purification. It ensures the destruction of pathogenic microorganisms that pass through the filtration stages. Chlorination is the most widely used method of water disinfection worldwide. It was first introduced in Belgium in 1902 and became a standard public health measure. 133Applied Community Health Education

Methods of Chlorination The following methods of chlorination are described by Park: • Plain chlorination: Addition of chlorine directly without pre-treatment; used only when water is of good quality1 • Pre-chlorination: Chlorine added before sedimentation and filtration to control algae and reduce bacterial load • Post-chlorination: Most common; chlorine added after filtration to achieve residual disinfection • Super-chlorination (Hyper-chlorination): Adding 5–15 mg/L chlorine, followed by dechlorination; used in emergencies and polluted sources • Breakpoint chlorination: Adding chlorine until all reducing substances are oxidised and a stable residual is achieved; ensures effective disinfection • Double chlorination: Combination of pre- and post-chlorination Method of Chlorination Dose Indication Remarks Plain (simple) 0.5 mg/L Good quality water Must verify residual Pre-chlorination 1–2 mg/L High algae/ turbid water Reduces treatment burden Post-chlorination 0.2–0.5 mg/L residual Standard municipal supply Most widely used Superchlorination 5–15 mg/L Emergency; heavily polluted Requires dichlorination Breakpoint Variable Ammonia- containing water Optimal residual achieved 134Applied Community Health Education

Advantages of Chlorination • Economical and cost-effective • Simple to apply and regulate • Highly effective against bacteria and most viruses • Provides residual protection throughout distribution system • Improves taste and colour at appropriate doses1 Disadvantages and Limitations • Ineffective against Cryptosporidium oocysts and Giardia cysts at routine doses • Chlorine reacts with organic matter (humic acids) to form disinfection by-products (DBPs) such as trihalomethanes (THMs), which are potentially carcinogenic • Taste and odour of chlorine may be objectionable at higher doses • Efficacy reduced at high pH and high turbidity 4.1.4 WATER POLLUTION Water pollution refers to the contamination of water bodies such as rivers, lakes, oceans, and groundwater by harmful substances. It is a major environmental issue that threatens ecosystems, human health, and sustainable development. Polluted water loses its natural quality, making it unsafe for drinking, agriculture, industry, and aquatic life. Causes of Water Pollution • Industrial Waste: Discharge of chemicals, heavy metals, and toxic effluents into rivers and lakes. • Agricultural Runoff: Fertilizers, pesticides, and animal waste entering water bodies. • Domestic Sewage: Household waste, detergents, and untreated sewage contaminating water. • Oil Spills: Leakage of petroleum products into oceans and seas. • Plastic Waste: Non-biodegradable plastics choking aquatic ecosystems. • Thermal Pollution: Discharge of heated water from power plants affecting aquatic organisms. 135Applied Community Health Education

Types of Water Pollutants • Organic Pollutants: Sewage, food waste, and plant residues. • Inorganic Pollutants: Salts, acids, heavy metals. • Biological Pollutants: Pathogenic bacteria, viruses, and parasites. • Chemical Pollutants: Pesticides, fertilizers, detergents, and industrial chemicals. Effects of Water Pollution • On Human Health: Causes waterborne diseases such as cholera, dysentery, and typhoid. • On Aquatic Life: Leads to oxygen depletion, fish kills, and loss of biodiversity. • On Environment: Disrupts ecological balance, contaminates soil, and affects agriculture. • On Economy: Reduces availability of clean water, increases treatment costs, and affects fisheries. 4.1.5 WATER BORNE DISEASE Water-borne diseases are illnesses caused by pathogenic microorganisms that are transmitted through contaminated water. These diseases occur when people consume, bathe in, or come into contact with polluted water containing bacteria, viruses, protozoa, or parasites. They are a major public health concern, especially in regions with inadequate sanitation, poor hygiene, and limited access to safe drinking water. Common Water-Borne Diseases Disease Causative Agent Mode of Transmission Key Symptoms Cholera Vibrio cholerae (bacterium) Drinking contaminated water or food Severe diarrhea, dehydration, vomiting 136Applied Community Health Education

Typhoid Fever Salmonella typhi (bacterium) Ingestion of contaminated water/food High fever, abdominal pain, weakness Dysentery Shigella spp. (bacterium) or amoebae Contaminated water and poor hygiene Bloody diarrhea, abdominal cramps Hepatitis A & E Hepatitis viruses Contaminated water and food Jaundice, fatigue, nausea Giardiasis Giardia lamblia (protozoan) Drinking contaminated water Diarrhea, bloating, weight loss Dracunculiasis (Guinea Worm Disease) Dracunculus medinensis (parasite) Drinking stagnant water with larvae Painful blisters, worm emergence Causes and Risk Factors • Contaminated Drinking Water: Presence of sewage, industrial waste, or agricultural runoff. • Poor Sanitation: Lack of proper toilets and waste disposal systems. • Floods and Natural Disasters: Mixing of sewage with drinking water sources. • Unsafe Food Practices: Washing or preparing food with polluted water. • Low Awareness: Lack of knowledge about hygiene and safe water practices. Effects on Public Health • High Morbidity and Mortality: Millions affected annually, especially children. • Nutritional Deficiencies: Chronic diarrhea leads to malnutrition. • Economic Burden: Increased healthcare costs and loss of productivity. • Social Impact: Reduced quality of life and hindered community development. 137Applied Community Health Education

Prevention and Control • Safe Water Supply: Boiling, filtering, or chlorinating drinking water. • Proper Sanitation: Construction of toilets and sewage treatment facilities. • Personal Hygiene: Handwashing with soap, safe food handling. • Vaccination: For diseases like cholera and typhoid. • Public Health Measures: Awareness campaigns, monitoring water quality, emergency response during outbreaks. 4.2. AIR POLLUTION AND ITS EFFECTS ON HEALTH AIR POLLUTION Introduction Air is an essential environmental component necessary for sustaining life. Human beings inhale approximately 10–12 m³ of air daily. The maintenance of clean air quality is therefore fundamental for human health and environmental wellbeing. Air pollution has become one of the most important public health challenges worldwide due to rapid urbanization, industrialization, increased vehicular emissions, and energy consumption. According to the World Health Organization (WHO), air pollution is responsible for millions of premature deaths annually and represents one of the leading environmental risk factors affecting human health. Definition Air pollution is defined as the contamination of indoor or outdoor air by physical, chemical, or biological agents that alter the natural characteristics of the atmosphere and may adversely affect human health, living organisms, or the environment. Composition of Normal Atmospheric Air Atmospheric air consists mainly of gases present in relatively constant proportions. 138Applied Community Health Education

Component Percentage (%) Nitrogen 78.09 Oxygen 20.95 Argon 0.93 Carbon dioxide 0.04 Other gases Trace amounts Classification of Air Pollutants Air pollutants may be classified according to their origin and physical nature. A. Primary Pollutants: Primary pollutants are emitted directly from identifiable sources into the atmosphere. Examples: • Carbon monoxide (CO) • Sulphur dioxide (SO₂) • Nitrogen oxides (NOx) • Particulate matter • Hydrocarbons B. Secondary Pollutants: Secondary pollutants are formed in the atmosphere through chemical reactions between primary pollutants. Examples: • Ozone (O₃) • Peroxyacetyl nitrate (PAN) • Sulphuric acid • Nitric acid • Photochemical smog 139Applied Community Health Education

Effects of Air pollution on Health Air pollution affects nearly every organ system in the body. • Respiratory Effects: The respiratory system is the most commonly affected by air pollution. Exposure to polluted air may cause cough, wheezing, bronchitis, asthma, chronic obstructive pulmonary disease (COPD), pulmonary fibrosis, and lung cancer. Children are particularly vulnerable because their lungs are still developing and they have higher respiratory rates. • Cardiovascular Effects: Air pollution increases the risk of cardiovascular diseases by causing inflammation and damage to blood vessels. It is associated with hypertension, ischemic heart disease, arrhythmias, myocardial infarction, and stroke. Fine particulate matter may enter the bloodstream and adversely affect cardiovascular function. • Neurological Effects: Prolonged exposure to air pollution may affect the nervous system, leading to headache, cognitive decline, memory impairment, neurodevelopmental disorders in children, and an increased risk of dementia in older adults. • Reproductive Effects: Air pollution adversely affects reproductive health and pregnancy outcomes. It has been associated with low birth weight, preterm birth, congenital anomalies, and various pregnancy complications • Carcinogenic Effects: Long-term exposure to polluted air increases the risk of lung cancer, bladder cancer, and certain hematological malignancies. The International Agency for Research on Cancer (IARC) has classified outdoor air pollution as carcinogenic to humans. • Effects on Children: Children are more susceptible to air pollution because of their immature lungs and immune systems. Exposure may result in reduced lung growth, asthma, frequent respiratory infections, and developmental abnormalities. • Effects on the Elderly: Older adults are particularly vulnerable to air pollution. It can aggravate chronic respiratory and cardiovascular diseases, leading to increased hospitalization and mortality. • Environmental Effects of Air Pollution: Acid Rain, Sulfur dioxide and nitrogen oxides combine with atmospheric moisture to form 140Applied Community Health Education

acid rain. It damages vegetation, acidifies soil and water bodies, and corrodes buildings and monuments. • bal Warming: Greenhouse gases such as carbon dioxide, methane, and nitrous oxide trap heat in the atmosphere, resulting in bal warming, climate change, and rising sea levels. • Ozone Layer Depletion: Chlorofluorocarbons (CFCs) deplete the ozone layer, increasing ultraviolet radiation reaching the Earth. This increases the risk of skin cancer, cataracts, and damage to plants and ecosystems. • Prevention and Control of Air Pollution: Air pollution is controlled in India through the Air (Prevention and Control of Pollution) Act, 1981, the Environment (Protection) Act, 1986, and the National Clean Air Programme (NCAP). • Environmental Measures: Environmental control includes reducing industrial emissions, using cleaner fuels, improving public transportation, promoting afforestation, and adopting proper waste management practices. • Personal Protective Measures: Individuals can reduce exposure by using face masks during periods of high pollution, avoiding outdoor activities when air quality is poor, avoiding smoking, improving indoor ventilation, and using cleaner cooking fuels instead of biomass fuels. Air Quality Index (AQI) and Health effects Air Quality Index is a standardized system for reporting daily air quality and associated health risks. AQI Category Health Effect 0–50 Good Minimal risk 51–100 Satisfactory Minor discomfort s101–200 Moderate Breathing discomfort 201–300 Poor Respiratory problems 301–400 Very Poor Significant health effects 401–500 Severe Serious health effects 141Applied Community Health Education

4.3. DISPOSAL OF WASTE AND SEWAGE 4.3.1 WASTE Waste generation is an inevitable consequence of human activities. Rapid population growth, urbanization, industrialization, and changing lifestyles have led to a substantial increase in waste production worldwide. Improper disposal of waste creates environmental pollution and contributes significantly to the spread of communicable diseases. Proper waste management is therefore essential for maintaining public health and environmental sanitation. According to the World Health Organization, inadequate waste disposal can contaminate water, soil, and air and increase the risk of infections and vector-borne diseases. Definition Waste may be defined as any unwanted, unusable, or discarded material generated from domestic, industrial, commercial, agricultural, or healthcare activities requiring safe disposal. Classification of Waste Waste can be classified according to source and characteristics. a) Solid Waste: Solid waste consists of discarded solid materials generated from households and institutions. Examples: Food waste, Paper, Plastics, Glass, Metals. b) Liquid Waste: Liquid waste consists of wastewater and other liquid substances. Examples: Domestic wastewater, Industrial effluents, Sewage c) Hazardous Waste: Hazardous waste contains harmful substances that may affect health. Examples: Chemicals, Pesticides, Radioactive materials, Biomedical waste. d) Biomedical Waste: Waste generated during diagnosis, treatment, or immunization. Examples: Needles, Syringes, Blood products, Human tissues. Sources of Waste Waste originates from various sources in human activities and industrial processes. Understanding these sources is essential for effective waste 142Applied Community Health Education

management, environmental protection, and sustainable development. Broadly, waste can be classified into domestic, industrial, agricultural, and healthcare sources. a) Domestic Sources: Domestic waste is generated from households and everyday human activities. • Household Garbage: Includes paper, packaging materials, and discarded items. • Food Residues: Leftover food, vegetable peels, and organic matter. • Plastic Materials: Bottles, bags, and other non-biodegradable plastics. b) Industrial Sources: Industries produce large quantities of waste during manufacturing and processing. • Chemical Wastes: Acids, alkalis, solvents, and toxic by-products. • Metal Wastes: Scrap metals, slag, and residues from mining or smelting. • Industrial Effluents: Liquid discharges containing pollutants released into water bodies. c) Agricultural Sources: Agricultural practices contribute significantly to waste generation. • Animal Waste: Manure, dung, and slaughterhouse residues. • Pesticides: Chemical residues contaminating soil and water. • Crop Residues: Straw, husks, and other plant remain after harvest. d) Healthcare Sources: Healthcare facilities generate specialized waste that requires careful handling. • Biomedical Waste: Used syringes, bandages, and infected materials. • Pharmaceutical Waste: Expired medicines and chemical formulations. • Laboratory Waste: Contaminated samples, reagents, and sharps. Disposal of Waste Various methods are used for safe waste disposal. 143Applied Community Health Education

a) Open Dumping: Waste is deposited in open areas without treatment. This type of disposal has disadvantages: • Air pollution • Foul odor • Vector breeding • Soil contamination b) Sanitary Landfill: Sanitary landfill involves disposal of waste into prepared land areas and covering with soil. It has below advantages • Prevents spread of disease • Reduces odors • Controls vector breeding c) Incineration: Incineration involves burning waste at high temperatures. The advantage and disadvantages are as under: Advantages: • Reduces waste volume • Destroys pathogens • Suitable for hospital waste Disadvantages: • Air pollution • High operational cost d) Composting: Composting is biological decomposition of organic matter by microorganisms. Advantages are: • Produces manure • Environment friendly • Reduces landfill burden e) Recycling: Recycling converts waste materials into reusable products. Examples are: • Paper • Glass 144Applied Community Health Education

• Plastics • Metals 4.3.2 SEWAGE Definition Sewage refers to wastewater containing human excreta, domestic waste, industrial waste, and surface runoff requiring treatment before disposal. Sewage consists of: • Water (approximately 99%) • Organic matter • Inorganic substances • Microorganisms • Suspended particles Disposal of Sewage a) Dilution Method: Treated sewage is discharged into rivers or water bodies, the requirements are : • Adequate water flow • Proper treatment • Environmental monitoring b) Land Treatment Method: Sewage is applied to land for purification by soil microorganisms. The advantages are: • Nutrient recycling • Natural purification c) Sewage Treatment Plants: Sewage undergoes treatment before disposal, stages include: i. Primary Treatment: Removal of large particles through: • Screening • Sedimentation 145Applied Community Health Education

ii. Secondary Treatment: Removal of organic matter by biological methods. • Methods Activated sludge process • Trickling filters iii. Tertiary Treatment: Advanced treatment for: • Nutrient removal • Disinfection • Water purification Health hazards of improper waste and sewage disposal Improper disposal of waste creates serious public health hazards and environmental problems. When waste is not managed correctly, it contaminates water, soil, and air, leading to the spread of diseases and ecological damage. The impact is both immediate and long-term, affecting human health, community well-being, and natural ecosystems. a) Water-Borne Diseases: Contaminated water becomes a breeding ground for pathogenic microorganisms. Example • Cholera: Caused by Vibrio cholerae, leading to severe diarrhea and dehydration. • Typhoid Fever: Caused by Salmonella typhi, resulting in fever and abdominal pain. • Hepatitis A: Viral infection causing jaundice and liver inflammation. • Dysentery: Caused by bacteria or amoebae, leading to bloody diarrhea and cramps. b) Vector-Borne Diseases: Improper waste disposal creates stagnant water and unhygienic conditions that support vectors like mosquitoes and flies. Examples include: • Malaria: Spread by Anopheles mosquitoes carrying Plasmodium parasites. • Dengue Fever: Transmitted by Aedes aegypti mosquitoes, causing high fever and joint pain. c) Environmental Effects: Beyond health impacts, improper disposal severely damages the environment. Effects include: 146Applied Community Health Education

• Soil Pollution: Toxic chemicals reduce soil fertility and contaminate crops. • Water Pollution: Waste leaches into rivers and groundwater, making water unsafe. • Air Pollution: Burning of waste releases harmful gases and particulates. • Foul Smell: Decomposing organic matter produces offensive odors. • Ecosystem Damage: Disturbs ecological balance, harms wildlife, and reduces biodiversity. Prevention and control of waste and Sewage pollution Waste and sewage pollution pose serious threats to public health, sanitation, and the environment. Effective prevention and control measures are essential to reduce disease transmission, protect ecosystems, and promote sustainable living. These measures can be implemented at the community, personal, and government levels. a) Community Measures • Proper Waste Segregation: Separation of biodegradable, recyclable, and hazardous waste at source. • Use of Sanitary Landfills: Safe disposal of solid waste to prevent contamination of soil and water. • Efficient Sewage Treatment: Treatment plants to remove pathogens and pollutants before discharge. • Public Awareness Programs: Education campaigns to promote hygiene and responsible waste disposal. • Recycling and Composting: Conversion of organic waste into compost and reuse of recyclable materials. b) Personal Measures • Avoid Littering: Proper disposal of waste in designated bins. • Maintain Household Sanitation: Clean surroundings to prevent breeding of disease vectors. • Proper Disposal of Waste: Safe handling of domestic and hazardous waste. • Hand Hygiene Practices: Regular washing of hands to prevent waterborne and vector-borne diseases. 147Applied Community Health Education

4.4 HOUSING AND HEALTH A. HOUSING Housing is one of the fundamental determinants of health and well-being. A house not only provides shelter but also protects individuals from environmental hazards, climatic conditions, infectious diseases, and social stressors. Adequate housing contributes significantly to physical, mental, and social health. Poor housing conditions are associated with increased morbidity and mortality due to communicable diseases, accidents, and psychological stress. According to the World Health Organization (WHO), healthy housing is a dwelling that supports a state of complete physical, mental, and social well-being. Definition Housing may be defined as the physical structure and immediate environment in which people live and carry out activities essential for daily life. Objectives of Healthy Housing: The primary objective of healthy housing is to provide a safe, comfortable, and hygienic living environment that promotes the physical and mental well-being of individuals and families. A healthy house should provide adequate protection against climatic factors such as excessive heat, cold, rain, humidity, and strong winds. It should help in the prevention of communicable diseases by ensuring proper ventilation, adequate lighting, safe water supply, sanitary facilities, and effective waste disposal. Healthy housing also facilitates the maintenance of personal hygiene by providing suitable facilities for bathing, washing, toilet use, and other hygienic practices. It contributes to the promotion of physical and mental health by providing sufficient space, privacy, natural light, fresh air, and a pleasant living environment. Proper housing should also ensure safety and comfort through appropriate construction, adequate ventilation, proper drainage, and protection from environmental hazards. In addition, healthy housing aims at the prevention of accidents by reducing risks such as falls, burns, electric shocks, poisoning, and other household injuries. Overall, healthy housing plays an important role in disease prevention, health promotion, and improvement of the quality of life. 148Applied Community Health Education

Characteristics of an Ideal House An ideal house should provide a safe, clean, comfortable, and healthy living environment for its occupants. It should be properly designed and constructed to protect residents from environmental hazards and promote physical and mental well-being. Site Selection The selection of a suitable site is an important factor in maintaining a healthy house. The site should have the following characteristics: • Elevated and dry: The site should be sufficiently elevated and dry to prevent dampness and flooding. • Proper drainage: Adequate drainage facilities should be available to prevent the accumulation of wastewater and rainwater. • Away from industrial pollution: The house should preferably be located away from factories, smoke, harmful gases, excessive noise, and other sources of industrial pollution. • Free from stagnant water: The surroundings should be free from stagnant water, which may provide breeding grounds for mosquitoes and other disease vectors. • Good accessibility: The house should have convenient access to roads, public transport, healthcare facilities, schools, markets, and other essential services. • Orientation refers to the positioning of a house or building in relation to the direction of sunlight and prevailing winds. Proper orientation helps to provide a healthy and comfortable living environment. • Ventilation is the process of supplying fresh air to an indoor space and removing stale, contaminated, or polluted air. • Adequate lighting is essential for maintaining health, safety, and comfort. Proper lighting enables people to perform daily activities without excessive strain on the eyes. • Safe drinking water should be available in sufficient quantity in house. • Proper sanitation facilities should include with Toilets, Sewage disposal, Waste disposal facilities. 149Applied Community Health Education

• Recommended for healthy housing included with floor space approximately 100–120 sq ft/person and ceiling height not less than 10 feet and window area should be at least one-fifth of floor area. Air space requirement around 500–1000 cubic feet/person B. HEALTH HEALTH EFFECTS OF POOR HOUSING Poor housing conditions can adversely affect physical and mental health. Major effects include: • Respiratory diseases due to poor ventilation, dampness, and indoor pollution. • Infectious diseases due to overcrowding and inadequate sanitation. • Allergies and asthma caused by dust, mould, and poor air quality. • Injuries and accidents due to unsafe buildings, faulty electrical systems, or slippery floors. • Heat- and cold-related illnesses due to inadequate temperature control. • Mental health problems, including stress, anxiety, and sleep disturbances. • Malnutrition and gastrointestinal diseases due to inadequate water supply and poor food hygiene. • Increased risk of chronic diseases because of prolonged exposure to unhealthy living conditions. PREVENTION AND CONTROL OF HOUSING-RELATED HEALTH PROBLEMS Housing-related health problems can be prevented and controlled by maintaining safe, clean, and healthy living conditions. The main measures include: 1. Proper ventilation – Ensure adequate natural or mechanical ventilation to provide fresh air and reduce indoor pollutants. 2. Adequate lighting – Provide sufficient natural and artificial light to maintain comfort and hygiene. 3. Safe water supply – Ensure access to clean and safe drinking water. 150Applied Community Health Education

4. Proper sanitation – Provide hygienic toilets, drainage, and effective sewage disposal. 5. Good waste management – Dispose of household waste properly to prevent pests and infections. 6. Control of overcrowding – Provide adequate living space and avoid excessive crowding. 7. Control of dampness and mould – Prevent water leakage and maintain dry walls and floors. 8. Pest control – Control mosquitoes, flies, rodents, and other household pests. 9. Clean surroundings – Keep the house and its surroundings clean and free from stagnant water and rubbish. 10. Regular maintenance – Repair structural defects, leaks, cracks, and damaged electrical or plumbing systems promptly. These measures help reduce the risk of respiratory infections, vector-borne diseases, injuries, allergies, and other housing-related health problems. 4.5 CONTROL OF VECTORS (MOSQUITO, FLIES, RODENTS) Vectors are living organisms that transmit infectious agents from one host to another. Vector-borne diseases remain a major public health concern worldwide and contribute significantly to morbidity and mortality, especially in tropical and developing countries. Environmental conditions, urbanization, poor sanitation, climate change, and inadequate waste management favor vector breeding and disease transmission. According to the World Health Organization (WHO), vector-borne diseases account for a considerable proportion of infectious diseases bally and affect millions of individuals annually. Definition A vector is a living carrier, usually an arthropod or animal, capable of transmitting pathogens from an infected source to susceptible individuals. Classification of Vectors Vectors may be classified according to their biological characteristics. 151Applied Community Health Education

a) Arthropod Vectors Examples: Mosquitoes, Flies, Fleas, Ticks, Lice. b) Animal Vectors Examples: Rodents, Dogs, Bats A. METHODS OF MOSQUITO CONTROL Mosquito control refers to the measures used to reduce mosquito breeding, population, and transmission of mosquito-borne diseases. The main methods are: 1. Environmental Control: Removal of stagnant water and proper disposal of containers, tyres, and other materials that can collect water. 2. Larval Control: Use of larvicides or biological agents to destroy mosquito larvae in breeding places. 3. Adult Mosquito Control: Use of insecticide spraying, fogging, mosquito nets, and indoor residual spraying to kill or prevent adult mosquitoes. 4. Personal Protection: Wearing protective clothing, using mosquito repellents, and installing screens on doors and windows. 5. Biological Control: Introduction or promotion of natural enemies of mosquitoes, such as larvivorous fish and certain microorganisms. 6. Chemical Control: Application of approved insecticides to control mosquito larvae and adult mosquitoes. 7. Community Participation: Public awareness, sanitation, regular cleaning of surroundings, and community efforts to eliminate mosquito breeding sites. B. METHODS OF FLY CONTROL Fly control aims to prevent the breeding and spread of flies and reduce the risk of transmission of diseases. 1. Environmental Control: Proper disposal of garbage, removal of animal waste, and maintenance of clean surroundings. 2. Sanitary Control: Keep food covered and maintain clean kitchens, toilets, drains, and waste-storage areas. 152Applied Community Health Education

3. Mechanical Control: Use fly screens, fly traps, sticky papers, and properly fitted doors and windows. 4. Chemical Control: Use suitable insecticides, fly sprays, larvicides, and residual insecticides when necessary. 5. Biological Control: Use natural enemies or biological agents to reduce fly breeding. 6. Personal Protection: Keep food covered and maintain good personal and household hygiene. C. METHODS OF RODENT CONTROL Rodent control involves measures to prevent, reduce, and eliminate rats and mice. The main methods are: 1. Environmental Control: Maintain cleanliness, proper waste disposal, and eliminate food and water sources. 2. Rodent-Proofing: Seal holes, cracks, drains, and other entry points in buildings. 3. Trapping: Use mechanical traps to capture and remove rodents. 4. Chemical Control: Use approved rodenticides carefully to control rodent populations. 5. Biological Control: Natural predators such as cats, owls, and snakes may help reduce rodents. 6. Regular Inspection: Frequently inspect premises for signs of rodent activity and take prompt corrective measures. D. FLOW CHART OF INTEGRATED VECTOR CONTROL STRATEGY Vector Surveillance Environmental Control Personal Protection Identification of Vector Chemical/Biological Measures Disease Prevention 153Applied Community Health Education

4.6 FOOD HYGIENE AND SANITATION Food is essential for maintaining life, growth, development, and health. However, food may also become a source of disease if it is contaminated during production, processing, preparation, storage, or distribution. Food hygiene and sanitation play a major role in preventing foodborne illnesses and maintaining public health. Poor hygienic practices and inadequate sanitation contribute significantly to morbidity and mortality worldwide, particularly in developing countries. According to the World Health Organization (WHO), unsafe food containing harmful microorganisms, parasites, viruses, or chemical substances causes numerous illnesses and contributes significantly to disease burden bally. 4.6.1 FOOD HYGIENE Definition Food hygiene refers to the conditions and measures necessary to ensure the safety and suitability of food at all stages of the food chain from production to consumption. a) Objectives of Food Hygiene The major objectives of food hygiene include: • Prevention of food contamination • Prevention of foodborne diseases • Maintenance of food quality • Protection of consumer health • Promotion of proper food handling practices • Reduction of public health hazards b) Sources of Food Contamination Food contamination may occur from various biological, chemical, and physical sources. • Biological Contamination: Biological contamination results from microorganisms entering food. Examples: Bacteria, Viruses, Parasites, Fungi 154Applied Community Health Education

• Chemical Contamination: Chemical contamination occurs due to harmful chemicals entering food. Examples: Pesticides, Heavy metals, Food additives, Industrial chemicals • Physical Contamination: Physical contamination involves foreign materials entering food. Examples: Dust particles, Hair, Glass fragments, Metal pieces c) Factors Affecting Food Hygiene Food hygiene is influenced by several important factors that help prevent contamination and foodborne diseases: 1. Personal Hygiene: Clean hands, clothing, and good health of food handlers help prevent contamination. 2. Water Quality: Safe and clean water is essential for cooking, washing food, and cleaning utensils. 3. Food Handling Practices: Proper handling, preparation, and serving of food reduce the risk of contamination. 4. Storage Conditions: Food should be stored in clean, covered, and suitable conditions to maintain its quality. 5. Environmental Sanitation: Clean surroundings, utensils, equipment, and proper waste disposal are essential. 6. Temperature Control: Maintaining proper cooking, cooling, and storage temperatures helps prevent the growth of harmful microorganisms. d) Foodborne Diseases Foodborne diseases are illnesses caused by consuming food or water contaminated with harmful microorganisms, toxins, or chemicals. Proper food hygiene helps prevent these diseases. The main factors influencing food hygiene are: Personal hygiene: Clean hands, clothes, and good health of food handlers. • Water quality: Use of clean and safe water for cooking and washing. • Food handling practices: Proper cleaning, preparation, and prevention of cross-contamination. • Storage conditions: Safe storage of food in clean and suitable containers. 155Applied Community Health Education

• Environmental sanitation: Clean surroundings, utensils, kitchens, and proper waste disposal. • Temperature control: Proper cooking, refrigeration, and maintenance of safe food temperatures. Common bacterial agents Salmonella, Staphylococcus aureus, Escherichia coli, Clostridium species. Disease Causative Agent Major Symptoms Typhoid fever Salmonella typhi Fever, abdominal pain Cholera Vibrio cholerae Severe diarrhea Hepatitis A Hepatitis A virus Jaundice Food poisoning Various organisms Vomiting, diarrhea Dysentery Shigella species Bloody diarrhea 4.6.2 FOOD SANITATION Definition Food sanitation refers to the maintenance of hygienic conditions and practices necessary for safe handling, preparation, storage, and serving of food to prevent contamination and disease transmission. Applications of Food Sanitation Food sanitation is applied in various settings to prevent food contamination and protect health: • Households: Ensures safe cooking, handling, and storage of food. • Restaurants and Catering: Ensures compliance with food safety standards, health codes, and inspections. • Food Industry: Uses systems such as HACCP (Hazard Analysis and Critical Control Points) to identify and control food hazards. • Hospitals and Schools: Ensures safe and hygienic meals, especially for vulnerable groups. 156Applied Community Health Education

Factors Influencing Food Hygiene Food hygiene is influenced by personal hygiene, water quality, food handling practices, storage conditions, environmental sanitation, and proper temperature control. Food Sanitation Measures Food sanitation measures are practices followed to ensure that food is safe, clean, and free from harmful microorganisms and contaminants. Important measures include: 1. Maintain personal hygiene of food handlers, including clean hands, nails, clothes, and hair. 2. Wash fruits and vegetables thoroughly before use. 3. Cook food properly to destroy harmful microorganisms. 4. Store food safely by protecting it from insects, dust, and contamination. 5. Keep utensils and kitchen surfaces clean and sanitized. 6. Use safe drinking water for cooking and washing food. 7. Prevent cross-contamination between raw and cooked foods. 8. Dispose of food waste properly and maintain clean surroundings. 9. Protect food from flies, rodents, and other pests. 10. Avoid using spoiled or contaminated food. Principles of Food Sanitation Food sanitation refers to maintaining cleanliness and hygiene during the preparation, handling, storage, and serving of food. The main principles are: 1. Personal hygiene – Food handlers should maintain clean hands, clothes, hair, and nails. 2. Clean food premises – Kitchens, utensils, and equipment should be kept clean and sanitary. 3. Safe water supply – Use clean and safe water for cooking, washing, and drinking. 157Applied Community Health Education

4. Prevention of contamination – Protect food from dust, insects, chemicals, and harmful microorganisms. 5. Proper cooking – Cook food thoroughly to destroy disease-causing microorganisms. 6. Proper storage – Store food at appropriate temperatures and protect it from contamination. 7. Safe handling – Avoid unnecessary touching of food and use clean utensils. 8. Waste disposal – Dispose of food waste properly to prevent pests and environmental pollution. 9. Pest control – Prevent flies, cockroaches, rodents, and other pests from entering food areas. 10. Prevention of cross-contamination – Keep raw and cooked foods separate during preparation and 158Applied Community Health Education

CHAPTER -5 Communicable Diseases 159Applied Community Health Education

Communicable diseases are illnesses caused by infectious agents such as bacteria, viruses, fungi, or parasites that can be transmitted from an infected person, animal, or contaminated environment to another person. They may spread through air, water, food, direct contact, insects, or contaminated objects. Communicable diseases are an important public health concern because they can spread rapidly within communities. Early detection, proper treatment, immunization, personal hygiene, sanitation, and health education play a vital role in their prevention and control. 5.1 DEFINITION AND CLASSIFICATION Definition Communicable diseases are illnesses caused by specific infectious agents or their toxic products which are transmitted from an infected person, animal, or reservoir to a susceptible host either directly or indirectly. They constitute one of the major causes of morbidity and mortality worldwide, particularly in developing countries where factors such as overcrowding, poor sanitation, inadequate nutrition, and limited access to healthcare facilitate their spread. The study of communicable diseases is fundamental to public health because effective prevention and control measures can significantly reduce disease burden and improve community health. Classification of Communicable Diseases Type of Disease Causative Organism Examples Bacterial Diseases Bacteria Tuberculosis, Cholera, Typhoid Fever, Diphtheria, Whooping Cough COMMUNICABLE DISEASES 5CHAPTER 160Applied Community Health Education

Viral Diseases Viruses Measles, Mumps, Influenza, Chickenpox, Rabies, Hepatitis, Dengue Fever Protozoal Diseases Protozoa Malaria, Amoebic Dysentery Fungal Diseases Fungi Ringworm, Candidiasis Helminthic Diseases Parasitic Worms (Helminths) Ascariasis, Hookworm Disease, Filariasis Classification of Communicable Diseases According to Mode of Transmission Mode of Transmission Description Examples Air-borne Diseases Spread through droplets, droplet nuclei, or aerosols in the air Tuberculosis, Measles, Influenza, Diphtheria, Chickenpox Water-borne Diseases Spread through contaminated water Cholera, Typhoid Fever, Dysentery, Hepatitis A, Hepatitis E Food-borne Diseases Spread through contaminated food Typhoid Fever, Cholera, Dysentery, Hepatitis A Vector-borne Diseases Spread by insects or other vectors Malaria, Dengue Fever Contact Diseases Spread by direct contact or contaminated articles Scabies, Ringworm, Pediculosis, Conjunctivitis Sexually Transmitted Diseases (STDs) Spread primarily through sexual contact Syphilis, Gonorrhoea, HIV/AIDS, Chancroid, Genital Herpes Zoonotic Diseases Transmitted from animals to humans Rabies, Plague, Anthrax Blood-borne Diseases Spread through infected blood or blood products HIV/AIDS, Hepatitis B, Hepatitis C 161Applied Community Health Education

5.2 MODE OF TRANSMISSION Mode of transmission refers to the way in which an infectious disease spreads from an infected person, animal, or source to a susceptible person. The main modes are: 1. Air-borne Diseases: Air-borne diseases are infectious diseases that spread from an infected person to another person through airborne droplets or tiny particles released during coughing, sneezing, talking, or breathing. Examples: Tuberculosis, measles, chickenpox, influenza, and COVID-19. 2. Water-borne Diseases: Water-borne diseases are illnesses caused by drinking or using water contaminated with disease-causing microorganisms, such as bacteria, viruses, and parasites. They are commonly spread through poor sanitation and unsafe drinking water. Common water-borne diseases are Cholera, Typhoid, Dysentery, Hepatitis A, Hepatitis E, Giardiasis. 3. Food-borne Diseases: Food-borne diseases are illnesses caused by consuming contaminated food or water containing harmful microorganisms, toxins, chemicals, or parasites.Common causes are Bacteria such as Salmonella and E. coli, Viruses such as norovirus, Parasites and their eggs. Chemical or toxin contamination 4. Vector-borne Diseases: Vector-borne diseases are infectious diseases transmitted to humans or animals through the bite of infected vectors, such as mosquitoes, ticks, fleas, and sandflies. Examples: Malaria – transmitted by Anopheles mosquitoes, Dengue – transmitted by Aedes mosquitoes, Chikungunya – transmitted by Aedes mosquitoes, Japanese Encephalitis – transmitted mainly by Culex mosquitoes, Kala-azar – transmitted by sandflies Plague – transmitted by infected fleas. 5. Contact Diseases: Direct person-to-person spread is relatively uncommon but may occur under conditions of poor hygiene. The incubation period ranges from a few hours to about five days, although it is usually between one and three days. The short incubation period contributes to the rapid spread of outbreaks in susceptible populations. 6. Sexually Transmitted Diseases (STDs): Sexually Transmitted Diseases (STDs) are infections that are mainly transmitted from one person 162Applied Community Health Education

to another through sexual contact. They may be caused by bacteria, viruses, or parasites.Common STDs includes Syphilis, Gonorrhoea, Chlamydia, HIV/AIDS, Genital herpes, Human papillomavirus (HPV), Trichomoniasis 7. Zoonotic Diseases: Zoonotic diseases are infectious diseases that can be transmitted naturally between animals and humans. They may be caused by bacteria, viruses, parasites, or fungi. Examples: Rabies, anthrax, brucellosis, plague, leptospirosis, and avian influenza. 8. Blood-borne Diseases: Blood-borne diseases are infections that can be transmitted through infected blood or certain body fluids from an infected person to another person. They may spread through contaminated needles, unsafe blood transfusion, accidental needle- stick injuries, or unprotected exposure to infected blood.Common blood-borne diseases include Hepatitis B (HBV), Hepatitis C (HCV), Human Immunodeficiency Virus (HIV) infection, Malaria — may be transmitted through blood transfusion or contaminated needles, although its usual mode of transmission is through mosquitoes. Prevention and control of communicable diseases The prevention and control of communicable diseases aim to break the chain of infection and prevent the spread of disease in the community. The main measures include: 1. Early diagnosis and treatment of infected persons. 2. Isolation of patients when necessary to prevent transmission. 3. Immunization to provide protection against vaccine-preventable diseases. 4. Personal hygiene, including regular handwashing and respiratory hygiene. 5. Safe water and food to prevent water- and food-borne infections. 6. Proper sanitation and waste disposal to maintain a healthy environment. 7. Vector control, such as controlling mosquitoes, flies, and other disease carriers. 8. Health education to promote healthy practices and awareness. 163Applied Community Health Education

9. Surveillance and notification of communicable diseases for timely public-health action. 10. Use of personal protective measures, such as masks and protective clothing, when appropriate. 5.3 COMMON COMMUNICABLE DISEASES Communicable diseases are illnesses that can spread from an infected person, animal, or contaminated environment to another person. Common communicable diseases are: 1. Tuberculosis (TB) – spreads mainly through airborne droplets. 2. Measles – spreads through respiratory droplets and close contact. 3. Influenza (Flu) – spreads through respiratory droplets and contaminated surfaces. 4. COVID-19 – spreads mainly through respiratory particles. 5. Cholera – spreads through contaminated food and water. 6. Typhoid – transmitted through contaminated food and water. 7. Hepatitis A – spreads mainly by the faeco-oral route. 8. Malaria – transmitted through the bite of infected Anopheles mosquitoes. 9. Dengue – transmitted mainly by infected Aedes mosquitoes. 10. Rabies – transmitted through the bite or saliva of an infected animal. 11. Chickenpox – spreads through respiratory droplets and direct contact. 12. Whooping cough – spreads through respiratory droplets. 1. TUBERCULOSIS Tuberculosis (TB) is a chronic communicable disease caused by bacteria belonging to the Mycobacterium tuberculosis complex. It is one of the oldest known infectious diseases and remains a major public health problem worldwide, particularly in low- and middle-income countries. Tuberculosis primarily affects the lungs (pulmonary tuberculosis), but it can also involve almost any organ of the body, resulting in extrapulmonary tuberculosis. 164Applied Community Health Education

TB spreads mainly through airborne droplets released when a person with infectious pulmonary tuberculosis coughs, sneezes, speaks, or sings. Although tuberculosis is preventable and curable, delayed diagnosis, poor treatment adherence, drug-resistant strains, malnutrition, and HIV infection continue to contribute to its high disease burden. Early diagnosis, effective treatment, vaccination, and public health measures are essential for its prevention and control. Etiological Agent The causative organism of tuberculosis is Mycobacterium tuberculosis, an acid-fast, aerobic, non-motile, non-spore-forming bacillus. Mode of Transmission Tuberculosis is transmitted primarily through the airborne route. When a patient with active pulmonary tuberculosis coughs, sneezes, laughs, or speaks, tiny droplet nuclei containing M. tuberculosis are released into the air. These droplets remain suspended for several hours and may be inhaled by susceptible individuals. Tuberculosis rarely transmitted to Consumption of unpasteurized milk contaminated with M. bovis, Laboratory accidents (rare) and Organ transplantation (extremely rare). TB is not transmitted by handshakes, sharing food, clothing, bedding, mosquitoes or insects Incubation Period The incubation period generally ranges from 2 to 12 weeks, during which infection develops after exposure. • Active disease may develop months or even years after initial infection. • Approximately 5–10% of infected individuals develop active TB during their lifetime, especially if immunity declines. Clinical Features Tuberculosis (TB) is an infectious disease caused mainly by Mycobacterium tuberculosis. It most commonly affects the lungs (pulmonary tuberculosis) but may involve other organs (extrapulmonary tuberculosis). 165Applied Community Health Education

1. General Clinical Features • Persistent low-grade fever, often worse in the evening • Night sweats • Loss of appetite • Unintentional weight loss • General weakness and fatigue • Malaise • Pallor and reduced physical activity 2. Pulmonary Tuberculosis • Persistent cough, usually lasting more than 2–3 weeks • Initially dry cough, which may later become productive • Sputum production • Blood in sputum (haemoptysis) in some cases • Chest pain, particularly during coughing or deep breathing • Shortness of breath in advanced or extensive disease • Fever and night sweats • Weight loss and loss of appetite 3. Extrapulmonary Tuberculosis Depending on the organ involved, clinical features may include: • Lymph node TB: painless enlargement of lymph nodes, commonly in the neck • Pleural TB: chest pain, fever and difficulty breathing • Tuberculous meningitis: headache, fever, vomiting, neck stiffness and altered consciousness • Abdominal TB: abdominal pain, fever, weight loss and altered bowel habits • Bone and joint TB: persistent pain, swelling and restricted movement • Renal TB: urinary symptoms, blood in urine and flank pain • Genital TB: pelvic symptoms and reproductive problems 166Applied Community Health Education

Diagnosis Early diagnosis is essential to reduce transmission and improve treatment outcomes. Prevention and Control Prevention and control of tuberculosis (TB) require early detection and complete treatment of cases, prevention of transmission, vaccination, and protection of high-risk individuals. 1. Early diagnosis and treatment: Detect TB cases as early as possible and ensure that patients complete the full prescribed anti-tubercular treatment. 2. BCG vaccination: BCG vaccination is an important preventive measure, particularly for children, and helps protect against severe forms of childhood TB. 3. Respiratory hygiene: Patients with infectious TB should cover their mouth and nose while coughing or sneezing and avoid spitting in public places. 4. Adequate ventilation: Good ventilation and exposure to sunlight in homes, hospitals, classrooms, and other crowded places help reduce the risk of airborne transmission. 5. Contact tracing: People who have been in close contact with a person having infectious TB should be identified and appropriately screened. 6. Preventive treatment: Individuals at increased risk of developing TB, such as eligible close contacts and people with latent TB infection, may be given preventive treatment according to national guidelines. 7. Avoid overcrowding: Improving housing conditions and reducing overcrowding help minimize the spread of TB. 8. Nutritional support: A balanced and adequate diet helps maintain general health and immunity, particularly among vulnerable individuals. 9. Infection-control measures: Healthcare facilities should follow appropriate TB infection-control practices, including ventilation, respiratory protection, and separation of infectious patients when necessary. 167Applied Community Health Education

10. Health education: People should be educated about the symptoms of TB, modes of transmission, importance of early diagnosis, adherence to treatment, and prevention of transmission. National TB Elimination Programme (NTEP) India’s tuberculosis control programme is implemented through the National TB Elimination Programme (NTEP), formerly known as the Revised National Tuberculosis Control Programme (RNTCP). The programme aligns with the goal of eliminating tuberculosis as a public health problem. 2. MEASLES Measles is a highly contagious acute viral disease characterized by fever, cough, coryza, conjunctivitis, and a characteristic maculopapular rash. It is one of the most infectious diseases known to humans and has historically been a major cause of childhood morbidity and mortality worldwide. Before the introduction of widespread immunization, measles occurred in large epidemics and affected nearly every child during early life. Etiological Agent Measles is caused by the measles virus, a member of the genus Morbillivirus belonging to the family Paramyxoviridae. The virus is: • An RNA virus • Highly infectious • Sensitive to heat and sunlight • Capable of causing lifelong immunity following infection • Only one serotype of the virus exists, which makes vaccination highly effective in preventing disease. Mode of Transmission Transmission occurs primarily through the airborne route. The virus spreads through: • Droplet nuclei • Aerosolized respiratory secretions 168Applied Community Health Education

• These particles may remain suspended in the air and infect susceptible individuals even without direct contact. Incubation Period The incubation period is usually about 10 days from exposure to the onset of fever and approximately 14 days until the appearance of the rash. The period may vary slightly among individuals. Clinical Features • Measles is a highly contagious viral infection characterized by: • High fever, cough, runny nose (coryza) and conjunctivitis. • Koplik spots—small white spots inside the cheeks, appearing before the skin rash. • Maculopapular rash that usually begins on the face and behind the ears and spreads downward to the trunk and limbs. • General weakness, loss of appetite and malaise. • The rash may become widespread and gradually fade after several days. • Complications may include pneumonia, otitis media, diarrhoea and, rarely, encephalitis. Diagnosis Diagnosis is based on clinical findings and laboratory investigations. Prevention and Control of Measles Prevention and control of measles mainly depend on high vaccination coverage and early detection of cases. The MMR vaccine is the most effective preventive measure and should be given according to the recommended immunization schedule. Suspected cases should be identified early, isolated, and reported to health authorities. Close contacts may be given appropriate post-exposure prophylaxis when indicated. Good ventilation, hand hygiene, and avoidance of close contact with infected persons also help reduce transmission. 169Applied Community Health Education

3. INFLUENZA (FLU) Fever, also known as pyrexia, is one of the most common manifestations of communicable diseases and represents an elevation of body temperature above the normal physiological range. It is a protective response of the body to infection, inflammation, or other pathological processes. In community health practice, fever is often the earliest indication of an infectious disease and serves as an important warning sign requiring further evaluation. Fever is not a disease in itself but a symptom associated with numerous communicable and non-communicable conditions. Infectious diseases such as malaria, dengue, typhoid fever, tuberculosis, influenza, measles, and viral hepatitis commonly present with fever as a major clinical feature. Because of its frequency and public health significance, fever remains one of the most common reasons for seeking medical care. Definition Fever is defined as a temporary elevation of body temperature above the normal range due to resetting of the hypothalamic thermoregulatory center. SITE AND TEMPARATURE CHART glo Fever Temperature Oral Above 37.2°C (99°F) Rectal Above 37.8°C (100°F) Axillary Above 37°C (98.6°F) Epidemiology Fever occurs worldwide and affects individuals of all age groups. It is commonly associated with infectious diseases, inflammatory disorders, autoimmune diseases, malignancies, environmental factors. In developing countries, communicable diseases remain the most common cause of fever. The majority of fevers in community settings result from infections. Clinical Features of Influenza (Flu) Influenza is an acute viral infection characterized by sudden onset of fever, chills, headache, marked fatigue, and muscle and joint pains. It commonly causes dry cough, sore throat, nasal congestion, and runny nose. Some patients 170Applied Community Health Education

may develop loss of appetite, nausea, or vomiting, especially children. Severe cases may be complicated by pneumonia or difficulty in breathing. Types of Influenza (Flu) Influenza is mainly caused by four types of influenza viruses: Influenza A, B, C, and D. Influenza A and B are the major types responsible for seasonal flu in humans. Influenza C usually causes mild illness, while Influenza D mainly affects cattle and is not known to commonly cause disease in humans. Influenza A: Influenza A is the most important type from a public health perspective because it is responsible for epidemics and pandemics. It infects both humans and animals and exhibits considerable genetic variability. Influenza B: Influenza B primarily affects humans and causes seasonal outbreaks but does not usually produce pandemics. Influenza C: Influenza C generally causes mild respiratory illness and is of lesser public health importance. The influenza virus possesses surface antigens known as: Hemagglutinin (H) Neuraminidase (N) Variations in these antigens contribute to the emergence of new strains. Flu Type Pattern Common Examples Continuous Constantly elevated temperature Typhoid, Pneumonia Intermittent Fever alternates with normal temperature Malaria Remittent Fluctuates but never normal Tuberculosis Relapsing Fever-free intervals between attacks Relapsing fever, Malaria variants Prevention and Control of Influenza (Flu) Influenza can be prevented and controlled by maintaining good personal and environmental hygiene. Annual influenza vaccination is an important 171Applied Community Health Education

preventive measure. Regular handwashing, covering the mouth and nose while coughing or sneezing, avoiding close contact with infected persons, and staying at home when ill help reduce transmission. Proper ventilation, adequate rest, nutritious food, and sufficient fluids support recovery. In severe or high-risk cases, early medical consultation and appropriate antiviral treatment may be required. 4. COVID 19 COVID-19 is an infectious disease caused by the novel coronavirus SARS- CoV-2. It was first identified in Wuhan, China, in December 2019 and subsequently spread rapidly across the world, resulting in a bal pandemic. The disease primarily affects the respiratory system and may range from mild illness to severe pneumonia and other complications. COVID-19 has had a major impact on public health, healthcare systems, and social and economic activities. Definition COVID-19 is a communicable respiratory disease caused by infection with Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). It is mainly transmitted from an infected person through respiratory particles and aerosols, particularly during close or prolonged contact. Epidemiology COVID-19 has occurred worldwide and affected people of all ages. Transmission is more likely in crowded, poorly ventilated, and indoor settings. The risk of severe disease is higher among older adults and people with certain underlying health conditions. The epidemiological pattern has varied over time due to the emergence of new variants, population immunity, vaccination, and changes in public-health measures. Most infected individuals develop mild or moderate illness, while a smaller proportion may develop severe disease requiring hospitalisation. Clinical Features The clinical features of COVID-19 vary from person to person. Common symptoms include fever, cough, sore throat, fatigue, headache, muscle or body aches, and loss or alteration of taste or smell. Some patients may experience nasal congestion, runny nose, nausea, vomiting, or diarrhoea. 172Applied Community Health Education

Severe cases may develop difficulty in breathing, pneumonia, low oxygen levels, chest discomfort, and respiratory failure. Some individuals may remain asymptomatic. Symptoms may appear a few days after infection and may vary according to the individual and circulating variant. Prevention and Control Prevention and control of COVID-19 depend on reducing transmission and protecting vulnerable individuals. Important measures include vaccination, good hand hygiene, respiratory etiquette, adequate ventilation, and avoiding close contact with people who are unwell. Wearing a well- fitting mask may provide additional protection in crowded or high-risk settings. Persons with symptoms should limit contact with others and follow appropriate testing and medical advice. Early recognition of severe symptoms and timely medical care are important for preventing complications and deaths. Public-health surveillance, infection-control practices, health education, and appropriate isolation measures also contribute to disease control. 5. CHOLERA Cholera is an acute intestinal infection that remains an important public health problem, particularly in areas with inadequate sanitation, unsafe drinking water, and poor hygiene. It can occur in outbreaks and epidemics and may cause severe dehydration and death if not treated promptly. Improvement of water supply, sanitation, hygiene, and access to appropriate treatment are essential for reducing the burden of cholera. Definition Cholera is an acute diarrhoeal disease caused by infection with toxigenic strains of the bacterium Vibrio cholerae. It is mainly transmitted through the consumption of food or water contaminated with the organism and is characterized by sudden onset of profuse, watery diarrhoea that can rapidly lead to severe dehydration. Epidemiology Cholera occurs mainly in regions where access to safe drinking water, sanitation, and hygiene facilities is inadequate. Humans are the main reservoir of epidemiological importance. The infection is transmitted 173Applied Community Health Education

primarily by the faeco-oral route, through contaminated water and food. Outbreaks are more common where there is overcrowding, poor sanitation, displacement of populations, flooding, or disruption of water and sanitation services. The incubation period is usually a few hours to five days, commonly around 2–3 days. Clinical Features Cholera may range from mild diarrhoea to severe, life-threatening illness. The main clinical features include: • Sudden onset of profuse, painless, watery diarrhoea. • Vomiting, usually without nausea. • Rapid loss of water and electrolytes. • Intense thirst and weakness. • Muscle cramps. • Signs of dehydration such as dry mouth, sunken eyes, reduced urine output, and poor skin turgor. • Severe cases may develop shock, kidney failure, altered consciousness, and death if treatment is delayed. • Prevention and Control • Prevention and control of cholera depend mainly on interrupting faeco- oral transmission and ensuring early treatment. • Provide safe and adequately treated drinking water. • Improve sanitation and proper disposal of human excreta. • Promote regular handwashing with soap and safe water. • Maintain proper food hygiene and consume thoroughly cooked food. • Avoid contaminated or untreated water and food. • Maintain cleanliness of the environment and proper disposal of waste. • Detect cases early and provide prompt rehydration therapy, particularly oral rehydration solution (ORS). • Refer severe cases for appropriate medical management and intravenous fluids when necessary. 174Applied Community Health Education

• During outbreaks, strengthen surveillance, case management, water- quality monitoring, sanitation, and health education. • Oral cholera vaccines may be used as an additional public-health measure in appropriate settings, particularly during outbreaks or in high-risk areas. 6. TYPHOID Typhoid is an important bacterial infection associated with inadequate sanitation, unsafe drinking water, and poor food hygiene. It is more common in areas where safe water and sanitation facilities are limited. The disease can spread from an infected person or carrier through contaminated food and water. Early diagnosis and appropriate treatment are essential to prevent complications and further transmission. Definition Typhoid fever is an acute systemic infectious disease caused mainly by the bacterium Salmonella enterica serovar Typhi (Salmonella Typhi). It is primarily transmitted through the faeco-oral route, usually by consumption of food or water contaminated with the faeces of an infected person or carrier. Epidemiology Typhoid occurs worldwide but is particularly common in regions with inadequate sanitation, unsafe water supplies, and poor food-handling practices. Humans are the main reservoir of infection. The disease is transmitted mainly through contaminated food and water. Infected individuals may continue to excrete the bacteria in their stools even after recovery and can become carriers. Children and young adults are commonly affected, although people of any age can develop the disease. The risk increases where clean drinking water, sanitation, and hygiene practices are inadequate. Clinical Features The incubation period of typhoid fever is usually 6–30 days. The illness commonly develops gradually and may include: • Persistent fever, often progressively increasing during the early stage. 175Applied Community Health Education

• Headache and general weakness. • Loss of appetite. • Abdominal discomfort or pain. • Nausea and sometimes vomiting. • Diarrhoea or constipation. • Body aches and fatigue. • Dry cough may occur in some patients. • In some cases, a faint rose-coloured skin rash may appear. • Severe cases may develop intestinal bleeding, intestinal perforation, confusion, or other complications. Prevention and Control Prevention and control of typhoid depend mainly on improving water, sanitation, food hygiene, and personal hygiene. Important measures include: • Safe drinking water: Use properly treated, boiled, or otherwise safe water. • Food hygiene: Consume properly cooked food and avoid contaminated or unsafe foods. • Hand hygiene: Wash hands thoroughly with soap and water after using the toilet and before preparing or eating food. • Proper sanitation: Ensure safe disposal of human faeces and maintain sanitary toilets. • Vaccination: Typhoid vaccines provide important protection, particularly for people living in or travelling to areas where typhoid is common. • Early diagnosis and treatment: Prompt medical evaluation and appropriate antibiotic treatment help reduce complications and transmission. • Control of carriers: Identifying and appropriately managing chronic carriers is important in preventing spread. • Health education: Promote awareness regarding safe water, sanitation, food safety, and personal hygiene. 176Applied Community Health Education

7. HEPATITIS A Hepatitis A is an acute infectious disease of the liver caused by the Hepatitis A virus (HAV). It is primarily associated with inadequate sanitation, unsafe drinking water, and consumption of contaminated food. Unlike hepatitis B and C, hepatitis A generally does not cause chronic liver disease. Most patients recover completely with supportive care. Definition Hepatitis A is an acute viral infection of the liver caused by the Hepatitis A virus and transmitted mainly through the faeco-oral route, usually by ingestion of food or water contaminated with the virus. Epidemiology Hepatitis A occurs worldwide and is more common in areas where sanitation and personal hygiene are poor. Humans are the main reservoir of infection. The virus is mainly spread through contaminated food and water or close contact with an infected person. Outbreaks may occur in communities, institutions, and areas with inadequate sanitation. Children may have mild or asymptomatic infection, while adults are more likely to develop noticeable symptoms. Clinical Features The incubation period is usually 15–50 days, with an average of about 28–30 days. Common clinical features include: • Fever and fatigue • Loss of appetite • Nausea and vomiting • Abdominal discomfort, particularly in the upper abdomen • Muscle and joint aches • Dark-coloured urine • Pale or clay-coloured stools • Jaundice, with yellowing of the skin and eyes • Enlarged or tender liver in some patients 177Applied Community Health Education

Symptoms usually develop over several days and gradually improve. Most patients recover completely, although recovery may take several weeks. Prevention and Control Prevention of hepatitis A depends mainly on good sanitation, safe water, food hygiene, and vaccination. Important measures include: • Drinking safe and clean water. • Proper disposal of human waste and maintenance of sanitary toilets. • Washing hands thoroughly with soap after using the toilet and before preparing or eating food. • Avoiding raw or inadequately cooked food from unsafe sources. • Maintaining proper food-handling and kitchen hygiene. • Avoiding close contact with infected individuals when possible. • Hepatitis A vaccination for recommended individuals and groups. • Early identification of cases and appropriate public-health measures during outbreaks. • Providing post-exposure prophylaxis to eligible susceptible contacts when indicated. There is no specific curative antiviral treatment for uncomplicated hepatitis A. Management is mainly supportive, including adequate rest, fluids, nutrition, and medical monitoring when required. 8. MALARIA Malaria is a life-threatening mosquito-borne infectious disease caused by protozoan parasites of the genus Plasmodium. It remains one of the most important public health problems in tropical and subtropical regions, particularly in sub-Saharan Africa, South-East Asia, and parts of South America. The disease is transmitted to humans through the bite of an infected female Anopheles mosquito. Although malaria is preventable and curable, delayed diagnosis and inadequate treatment may lead to severe complications and death. According to the World Malaria Report 2024, an estimated 282 million malaria cases and approximately 610,000 deaths occurred worldwide in 2024. 178Applied Community Health Education

The African Region accounted for about 95% of the bal burden, and children below five years of age represented nearly 75% of malaria-related deaths. Etiological Malaria is caused by protozoan parasites belonging to the genus Plasmodium. Five species are known to infect humans: • Plasmodium falciparum – Causes the most severe and life-threatening form of malaria. • Plasmodium vivax – Common in Asia and Latin America; capable of causing relapses due to dormant liver stages. • Plasmodium malariae – Causes chronic infections with milder symptoms. • Plasmodium ovale – Similar to P. vivax and may produce relapses. • Plasmodium knowlesi – A zoonotic species transmitted from monkeys, mainly reported in Southeast Asia. Clinical Features Malaria is an acute febrile illness caused by Plasmodium parasites and transmitted mainly through the bite of infected female Anopheles mosquitoes. The clinical presentation varies with the infecting species, parasite burden, and immune status of the patient. 1. Common Clinical Features • Fever, often intermittent or periodic • Chills and rigors • Sweating, especially after the fever • Headache • Body ache and muscle pain • Fatigue and weakness • Loss of appetite • Nausea and vomiting • Abdominal discomfort 179Applied Community Health Education

• Pallor due to anaemia • Enlargement of the spleen (splenomegaly) 2. Typical Malarial Paroxysm • A classical malarial attack may occur in three stages: • Cold stage: Sudden chills and shivering, sometimes with intense rigors. • Hot stage: High fever, headache, thirst, and a feeling of intense heat. • Sweating stage: Profuse sweating occurs, followed by a gradual fall in body temperature and temporary relief. 3. Severe Malaria • Severe malaria, particularly due to Plasmodium falciparum, may present with: • Altered consciousness or cerebral malaria • Convulsions • Severe anaemia • Jaundice • Respiratory distress • Hypoglycaemia • Acute kidney injury • Circulatory collapse or shock • Abnormal bleeding • Haemobinuria • Multiple organ dysfunction Prevention and Control Malaria prevention relies on reducing mosquito-human contact and controlling mosquito breeding. Vector Control • Insecticide-treated bed nets (ITNs) • Indoor residual spraying (IRS) 180Applied Community Health Education

• Elimination of stagnant water • Environmental sanitation and larval source management 9. DENGUE Dengue is an important mosquito-borne viral disease occurring mainly in tropical and subtropical regions. It is caused by the dengue virus and is transmitted primarily through the bite of infected Aedes mosquitoes. Dengue may range from a mild febrile illness to severe dengue, which can cause bleeding, shock, and organ involvement. Early recognition and appropriate supportive management are important in reducing complications and mortality. Definition Dengue is an acute viral infection caused by the dengue virus (DENV) and transmitted mainly by the bite of infected female Aedes mosquitoes, particularly Aedes aegypti. Epidemiology Dengue is widely distributed in tropical and subtropical regions, particularly in urban and semi-urban areas. It is endemic in many countries of Asia, Africa, the Americas, and the Western Pacific region. The disease occurs throughout the year in endemic areas, with transmission often increasing during and after the rainy season because stagnant water provides suitable breeding sites for mosquitoes. All age groups may be affected. The risk of transmission is influenced by the presence of mosquito vectors, climatic conditions, population density, inadequate water management, and accumulation of water-holding containers. Mode of Transmission Dengue is transmitted mainly through the bite of an infected female Aedes aegypti mosquito. The mosquito acquires the virus when it bites a person infected with dengue virus and can subsequently transmit the virus to other people through its bites. The mosquitoes commonly breed in artificial containers containing stagnant water, such as discarded tyres, buckets, flower pots, coolers, and 181Applied Community Health Education

water-storage containers. Rare transmission may occur through blood transfusion, organ transplantation, or from an infected mother to her infant. Clinical Features The incubation period is usually 4–10 days after infection. Common clinical features include: • Sudden onset of high fever • Severe headache • Pain behind the eyes • Muscle, joint, and bone pain • Nausea and vomiting • Weakness and fatigue • Skin rash • Mild bleeding, such as bleeding from the nose or gums In some patients, dengue may progress to severe dengue, characterized by severe abdominal pain, persistent vomiting, bleeding, difficulty in breathing, fluid accumulation, shock, or severe organ involvement. Warning signs often appear around the time the fever subsides and require urgent medical attention. Prevention and Control Prevention and control of dengue depend mainly on controlling mosquito breeding and preventing mosquito bites. Important measures include: • Eliminate stagnant water from containers, tyres, flower pots, coolers, and other sites. • Keep water-storage containers covered and clean. • Empty and clean water containers regularly. • Use mosquito repellents, protective clothing, and mosquito screens. • Use mosquito nets, particularly for infants, sick persons, and during daytime rest. • Maintain proper environmental sanitation and waste disposal. • Conduct community-based mosquito-control measures where necessary. 182Applied Community Health Education

• Persons with dengue should avoid mosquito bites during the febrile period to reduce the chance of mosquitoes acquiring the virus. • Seek early medical care when warning signs or severe symptoms develop. • Community participation and public health education are essential for sustained dengue control. 10. RABIES Rabies is an acute viral zoonotic disease affecting the central nervous system and is one of the oldest known infectious diseases. It is almost invariably fatal once clinical symptoms appear but is entirely preventable through timely and appropriate preventive measures. Rabies is transmitted mainly through the bite of infected animals, particularly dogs, and remains a significant public health problem in many developing countries, including India. Etiological Agent Rabies is caused by the rabies virus, which belongs to the family Rhabdoviridae and genus Lyssavirus. It is a bullet-shaped, single-stranded RNA virus with a marked affinity for nervous tissue. The virus infects all warm-blooded animals and spreads through peripheral nerves to the central nervous system. Mode of Transmission The commonest mode of transmission is the bite of a rabid animal, through which virus-containing saliva is introduced into the tissues. Infection may also occur through scratches contaminated with infected saliva or when saliva comes into contact with abraded skin, open wounds, or mucous membranes. Rare modes of transmission include organ transplantation, corneal transplantation, and accidental laboratory exposure. Natural human-to-human transmission is extremely uncommon. Clinical Features Rabies usually progresses through distinct clinical stages. The prodromal stage lasts for about 2–10 days and is characterized by fever, malaise, headache, fatigue, anxiety, irritability, and loss of appetite. A characteristic 183Applied Community Health Education

symptom is pain, tingling, burning, or itching at the site of the healed animal bite. Prevention and Control of Rabies Rabies can be prevented and controlled by the following measures: • Vaccination of dogs and cats – Regular vaccination of domestic animals helps prevent rabies transmission. • Avoid animal bites – Avoid contact with stray or suspicious animals. • Immediate wound care – Wash a bite or scratch thoroughly with soap and running water for about 15 minutes. • Post-exposure prophylaxis (PEP) – Seek immediate medical attention for rabies vaccination and, when indicated, rabies immunobulin. • Control of stray animals – Proper management and vaccination of stray dogs help reduce transmission. • Pre-exposure vaccination – Recommended for people at high occupational risk, such as veterinarians and animal handlers. 11. CHICKENPOX (VARICELLA) Chickenpox, also known as varicella, is an acute, highly contagious viral disease characterized by fever and a generalized vesicular rash appearing in successive crops. It is primarily a disease of childhood and is caused by the Varicella-Zoster Virus (VZV). Although generally considered a mild and self-limiting illness in healthy children, chickenpox can cause severe disease and complications in newborns, adults, pregnant women, and immunocompromised individuals. Etiological Agent Chickenpox is caused by the Varicella-Zoster Virus (VZV), also known as Human Herpesvirus Type 3. The virus belongs to: • Family: Herpesviridae • Subfamily: Alphaherpesvirinae 184Applied Community Health Education

Characteristics of the virus include: • DNA virus • Highly infectious • Ability to establish latent infection • Reactivation later in life as herpes zoster • Humans are the only known natural host of the virus. Mode of Transmission Chickenpox is transmitted primarily through airborne spread and direct contact. a) Airborne Transmission The virus spreads through: • Respiratory droplets • Aerosolized respiratory secretions • This route accounts for the rapid spread of disease in enclosed environments. b) Direct Contact Transmission may occur through direct contact with: • Vesicular fluid • Skin lesions • Contaminated secretions c) Indirect Transmission Indirect spread through contaminated articles is uncommon because the virus survives poorly outside the human body. Clinical Features Chickenpox is a highly contagious viral infection caused by the varicella- zoster virus. Its main clinical features include: • Mild fever, headache and malaise before or during the rash. • Itchy skin rash, usually beginning on the face, scalp and trunk. 185Applied Community Health Education

• Rash progresses from red spots → papules → clear fluid-filled vesicles → pustules → crusts. • Lesions appear in successive crops, so different stages are present at the same time. • Intense itching is common. • Lesions may also occur in the mouth and other mucous membranes. • Usually, the illness is self-limiting and recovery occurs within 1–2 weeks. Prevention and Control • Vaccination: Varicella vaccine is the most effective method of prevention. • Isolation: Infected persons should avoid school, work, and close contact until all lesions have crusted. • Avoid contact: Keep infected individuals away from pregnant women, newborns, and people with weakened immunity. • Good hygiene: Maintain hand hygiene and avoid sharing personal items. • Early identification: Recognize cases promptly and notify appropriate health authorities where required. • Post-exposure protection: Susceptible high-risk individuals may require varicella vaccine or specific immunobulin after exposure, as medically indicated. • Treatment: Provide adequate fluids, rest, fever control, and medical care for complications. 12. WHOOPING COUGH (PERTUSSIS) Whooping cough, also known as pertussis, is a highly contagious acute bacterial disease of the respiratory tract characterized by severe spasmodic coughing attacks followed by a characteristic inspiratory “whoop.” It is primarily a disease of infants and young children and remains an important cause of childhood morbidity and mortality, particularly in areas where immunization coverage is inadequate. 186Applied Community Health Education

Pertussis is caused by Bordetella pertussis and is transmitted through respiratory droplets. The disease is especially dangerous in infants, where complications such as pneumonia, convulsions, encephalopathy, and death may occur. Although widespread immunization has significantly reduced the incidence of pertussis in many countries, periodic outbreaks continue to occur because immunity acquired through vaccination or natural infection gradually declines over time. Etiological Agent Pertussis is caused by Bordetella pertussis, a small gram-negative coccobacillus. Important characteristics include: • Gram-negative bacterium • Strictly aerobic organism • Non-motile • Non-spore-forming • Produces several toxins and virulence factors The organism primarily infects the ciliated epithelial cells lining the respiratory tract. Mode of Transmission: Whooping cough is mainly transmitted through respiratory droplets produced by coughing, sneezing, or close contact with an infected person. It spreads easily, especially in crowded settings. Clinical Features: • Runny nose and mild fever in the early stage • Repeated, severe bouts of coughing • Characteristic “whooping” sound while breathing in • Vomiting after coughing • Tiredness and difficulty breathing, especially in infants • Cough may persist for several weeks 187Applied Community Health Education

Prevention and Control: • DPT/DTaP/Tdap vaccination as per the recommended immunization schedule • Early diagnosis and appropriate antibiotic treatment • Avoid close contact with infected persons • Cover mouth and nose while coughing or sneezing • Maintain good hand hygiene and ventilation • Keep infected individuals away from school/work until they are no longer infectious • Provide preventive antibiotics to close contacts when recommended. 13. DYSENTERY Dysentery is a communicable disease of the intestinal tract characterized by inflammation of the colon, resulting in frequent passage of stools containing blood and mucus, abdominal pain, and tenesmus. It remains an important public health problem in developing countries where poor sanitation, inadequate water supply, overcrowding, and low standards of personal hygiene facilitate transmission. Dysentery contributes significantly to morbidity, especially among children, and may lead to severe complications if not recognized and controlled promptly. The term dysentery does not refer to a specific disease but rather to a clinical syndrome. The two major forms of dysentery of public health importance are Bacillary Dysentery, caused by bacteria of the genus Shigella, and Amoebic Dysentery, caused by the protozoan parasite Entamoeba histolytica. Dysentery is broadly classified into: A. Amoebic Dysentery: Amoebic dysentery is caused by Entamoeba histolytica. It tends to have a more chronic course and may produce complications involving organs outside the intestine, particularly the liver. Etiological Agent Amoebic dysentery is caused by Entamoeba histolytica, a protozoan parasite that exists in two principal forms: 188Applied Community Health Education

• Trophozoite • Cyst The cyst form is infective and plays an important role in transmission. Mode of Transmission Transmission occurs through ingestion of mature cysts present in: • Contaminated water • Contaminated food • Raw vegetables • Unwashed fruits • Contaminated hands Flies and cockroaches may also contribute to mechanical spread. Clinical Features The disease frequently develops gradually and may become chronic. Common manifestations include: • Recurrent diarrhoea • Blood and mucus in stools • Abdominal discomfort • Flatulence • Weight loss • Weakness Unlike bacillary dysentery, fever is often absent or mild. The disease may alternate between periods of remission and exacerbation. B. Bacillary Dysentery Bacillary dysentery is caused by species of Shigella and is characterized by acute inflammation of the large intestine. It commonly occurs in outbreaks and spreads rapidly in overcrowded communities. 189Applied Community Health Education

Etiological Agent Bacillary dysentery is caused by bacteria belonging to the genus Shigella. The principal species include: • Shigella dysenteriae • Shigella flexneri • Shigella boydii • Shigella sonnei Among these, Shigella dysenteriae is often associated with severe disease and epidemic outbreaks. Mode of Transmission Transmission occurs primarily through the feco-oral route. Important modes include: • Contaminated food • Contaminated water • Direct person-to-person contact • Mechanical transmission by flies • Contaminated utensils and household articles Because the infective dose of Shigella is very small, transmission occurs easily in crowded settings. Clinical Features The disease often begins suddenly with: • Fever • Malaise • Headache • Abdominal pain • These symptoms are followed by: • Frequent loose stools • Blood and mucus in stools 190Applied Community Health Education

• Tenesmus • Painful defecation • Cramping abdominal pain The severity may vary from mild illness to severe disease accompanied by dehydration and systemic toxicity. Prevention and Control • Ensure safe drinking water and proper sanitation. • Wash hands with soap after using the toilet and before handling food. • Maintain food hygiene and eat properly cooked food. • Protect food from flies and contamination. • Use sanitary toilets and dispose of human excreta safely. • Early diagnosis and appropriate treatment of cases help prevent spread. • Control measures focus on interrupting feco-oral transmission and improving environmental sanitation. 14. DIPHTHERIA Diphtheria is an acute communicable bacterial disease characterized primarily by localized infection of the upper respiratory tract and the formation of a characteristic grayish-white pseudomembrane over the tonsils, pharynx, or larynx. It is a highly infectious disease of childhood and is one of the classical vaccine-preventable diseases of public health importance. Before the introduction of effective immunization programmes, diphtheria was a major cause of illness and death among children throughout the world. The disease is caused by toxigenic strains of Corynebacterium diphtheriae. Although the local lesion in the throat is characteristic, the major danger arises from the powerful exotoxin produced by the organism. This toxin may affect distant organs, especially the heart, nervous system, and kidneys, leading to severe complications and death. Because of widespread immunization, the incidence of diphtheria has declined substantially in many countries; however, outbreaks may still occur in areas with low vaccination coverage. 191Applied Community Health Education

Etiological Agent Diphtheria is caused by Corynebacterium diphtheriae, a gram-positive, non-motile, non-spore-forming bacillus. The organism exists in several biotypes: • Gravis • Mitis • Intermedius Only strains capable of producing diphtheria toxin cause classical severe disease. The pathogenic effects are largely due to this exotoxin rather than direct tissue invasion. The organism survives best in the mucous membranes of the respiratory tract and occasionally on the skin. Mode of Transmission: Diphtheria is mainly transmitted through respiratory droplets from an infected person during coughing, sneezing, or close contact. It may also spread through direct contact with infected skin lesions or contaminated articles. Clinical Features: • Sore throat and difficulty in swallowing • Mild fever and weakness • Swollen neck (“bull neck”) • Thick, greyish-white pseudomembrane over the tonsils, throat, or nose • Enlarged lymph nodes • Hoarseness or difficulty in breathing • Severe cases may cause myocarditis and nerve paralysis Prevention and Control: • Diphtheria vaccination (DPT/DT/Td) according to the recommended immunization schedule • Early diagnosis and prompt treatment 192Applied Community Health Education

• Isolation of infected patients • Administration of diphtheria antitoxin and appropriate antibiotics • Identification and treatment/prophylaxis of close contacts • Maintain good personal hygiene and respiratory etiquette • Proper disinfection of contaminated articles and surroundings 15. MUMPS (EPIDEMIC PAROTITIS) Mumps, also known as epidemic parotitis, is an acute communicable viral disease characterized primarily by painful swelling of one or more salivary glands, especially the parotid glands. It is a common childhood infection and is one of the classical vaccine-preventable diseases. Although generally self-limiting, mumps may occasionally lead to serious complications involving the central nervous system, testes, ovaries, pancreas, and other organs. The disease occurs worldwide and affects individuals of all age groups, although it is most common among children and adolescents. Before the introduction of vaccination, mumps was a frequent cause of outbreaks in schools, colleges, military establishments, and institutions. Widespread immunization has significantly reduced disease incidence in many countries; however, outbreaks may still occur where vaccination coverage is inadequate. Mumps is of public health importance because of its high communicability, outbreak potential, and the possibility of complications that may result in long-term consequences. Etiological Agent Mumps is caused by the mumps virus, which belongs to: • Family: Paramyxoviridae • Genus: Rubulavirus The virus is: • RNA virus • Highly contagious 193Applied Community Health Education

• Human pathogen only • Relatively unstable outside the human body • Infection generally results in long-lasting immunity. Mode of Transmission: Mumps is mainly transmitted by respiratory droplets and direct contact with saliva or respiratory secretions of an infected person. It spreads easily through close contact, especially in crowded settings. Clinical Features: • Fever, headache and malaise • Painful swelling of one or both parotid glands • Pain while chewing or swallowing • Dry mouth and loss of appetite • Muscle aches and fatigue • In some cases, orchitis, meningitis or pancreatitis may occur. Prevention and Control: • MMR vaccination is the most effective preventive measure. • Maintain good respiratory hygiene and hand hygiene. • Avoid close contact with infected persons. • Isolate infected individuals, particularly during the infectious period. • Ensure adequate ventilation in schools, hostels and other crowded places. • Identify cases early and follow public-health guidance during outbreaks. 16. CONTACT DISEASES Contact diseases are communicable diseases transmitted primarily through direct physical contact with an infected person or indirectly through contaminated articles such as clothing, bedding, towels, personal belongings, or environmental surfaces. These diseases occur worldwide and are more common in conditions of overcrowding, poor personal hygiene, poverty, and inadequate health education. 194Applied Community Health Education

Contact diseases constitute an important public health problem because they spread rapidly among family members, school children, hostel residents, institutional populations, and communities living in close proximity. Although many contact diseases are not life-threatening, they contribute significantly to morbidity, discomfort, absenteeism from school and work, social stigma, and economic burden. Common contact diseases of public health importance include scabies, pediculosis, ringworm (dermatophytosis), impetigo, conjunctivitis, and certain fungal skin infections. Most of these diseases are preventable through good personal hygiene, environmental sanitation, early diagnosis, and health education. Definition Contact diseases are communicable diseases transmitted directly from person to person through physical contact or indirectly through contaminated objects and materials. The infective agent may be parasitic, bacterial, fungal, or viral, and transmission usually requires close contact with infected individuals or contaminated articles. Types of Contact Disease 1) Direct contact diseases – spread by direct physical contact, e.g., scabies, conjunctivitis and ringworm. 2) Indirect contact diseases – spread through contaminated objects or surfaces, e.g., some skin infections and infections transmitted through contaminated towels, clothes or utensils. Mode of Transmission • Direct skin-to-skin contact • Contact with infected wounds or secretions • Sharing contaminated clothes, towels, bedding or utensils • Contact with contaminated surfaces and objects • Close personal contact with an infected person • Contact with infected animals in some diseases 195Applied Community Health Education

Clinical Features Clinical features vary according to the disease but commonly include: • Skin rashes, itching and redness • Swelling and local inflammation • Blisters, sores or skin lesions • Eye redness and discharge in conjunctival infections • Fever and general weakness in some infections • Discharge or foul odour from infected areas Prevention and Control • Maintain good personal hygiene and regular handwashing. • Avoid direct contact with infected persons and lesions. • Do not share towels, clothes, bedding or personal articles. • Keep wounds and skin infections properly covered. • Wash and disinfect contaminated clothes and articles. • Maintain cleanliness of the home and surroundings. • Early diagnosis and appropriate treatment of infected persons. • Educate the community about hygiene and prevention. • Isolate infected individuals when necessary to prevent further spread. 17. SEXUALLY TRANSMITTED DISEASES (STDS) / SEXUALLY TRANSMITTED INFECTIONS (STIS) Sexually Transmitted Diseases (STDs), also known as Sexually Transmitted Infections (STIs), are communicable diseases that are transmitted predominantly through sexual contact. They constitute a major public health problem worldwide because of their high prevalence, potential complications, social consequences, and impact on reproductive health. STDs affect individuals of all age groups but are particularly common among sexually active adolescents and young adults. These infections may be caused by bacteria, viruses, parasites, or fungi and can result in 196Applied Community Health Education

acute illness, chronic disability, infertility, adverse pregnancy outcomes, neonatal infections, and increased susceptibility to other infectious diseases. Definition Sexually transmitted diseases (STDs) are infectious diseases that are primarily transmitted from one person to another through sexual contact, including vaginal, anal, or oral sex. Classification of Sexually Transmitted Diseases Bacterial STDs Viral STDs Parasitic STDs Fungal Infection Gonorrhoea HIV/AIDS Trichomoniasis Candidiasis Syphilis Genital Herpes Pubic lice infestation Chancroid Human Papillomavirus (HPV) Infection Lymphogranuloma Venereum Hepatitis B Granuloma Inguinale Molluscum Contagiosum Types of Sexually Transmitted Disease. STDs may be caused by: • Bacteria: Syphilis, Gonorrhoea, Chlamydia, Chancroid. • Viruses: HIV/AIDS, Genital herpes, Human papillomavirus (HPV), Hepatitis B. • Protozoa: Trichomoniasis. • Fungi: Genital candidiasis. Mode of Transmission • Unprotected vaginal, anal, or oral sexual contact. • Contact with infected genital sores, lesions, or body fluids. 197Applied Community Health Education

• Sharing contaminated needles or syringes. • Transmission from an infected mother to her baby during pregnancy or childbirth. • Rarely, through contaminated blood or blood products. Clinical Features Common features include: • Abnormal genital discharge. • Burning or pain during urination. • Genital ulcers, sores, or blisters. • Itching or irritation of the genital area. • Pelvic or lower abdominal pain. • Pain during sexual intercourse. • Swollen lymph nodes. • Skin rashes, particularly in some infections. • Many STDs may produce no symptoms, especially in the early stages. Prevention and Control • Practice safe sex and use condoms correctly and consistently. • Avoid multiple or unknown sexual partners. • Get tested regularly when at risk. • Early diagnosis and complete treatment of infected persons. • Sexual partners should also be tested and treated when indicated. • Avoid sharing needles and use sterile equipment. • Ensure safe blood screening and transfusion practices. • Take available vaccines, particularly HPV and hepatitis B vaccines. • Maintain proper sexual and reproductive health education. • Avoid sexual contact until treatment is completed when advised by a healthcare professional. 198Applied Community Health Education

Comparison of communicable diseases Disease Agent Transmission Reservoir Incubation Period Tuberculosis Mycobacterium tuberculosis Airborne Humans 2–12 weeks Malaria Plasmodium spp. Mosquito bite Humans 7–30 days Dengue Dengue virus Aedes mosquito Humans 4–10 days Cholera Vibrio cholerae Food and water Humans Few hours–5 days Hepatitis A HAV Feco-oral Humans 15–50 days Diphtheria Corynebacterium diphtheriae Droplets Humans 2–6 days Measles Measles virus Airborne Humans 10–14 days Chickenpox Varicella-zoster virus Airborne/ contact Humans 10–21 days Pertussis Bordetella pertussis Droplets Humans 6–20 days Influenza Influenza virus Droplets Humans/ animals 1–4 days Rabies Rabies virus Animal bite Animals Usually 1–3 months Mumps Mumps virus Droplets Humans 14–25 days Typhoid Salmonella Typhi Feco-oral Humans 7–21 days 199Applied Community Health Education

CHAPTER -6 Non-Communicable Diseases 200Applied Community Health Education

Flipso