RAKOLL BRIT AD Brochure

View RAKOLL BRIT AD Brochure flipbook.

www.britishadhesives.co.uk BONDING BRITAIN TOGETHER Piece by Piece Bonding The ™ Tony 07484 341294 arook.ba@gmail.com Reece 07791 640382 rtomlinson.ba@gmail.com BRIT-AD LTDBONDING BRITAIN TOGETHER R

Woodworking Adhesives RAKOLL® ECO 3 One component PVAc based D3 adhesive RAKOLL® ECO 3 is a one component polyvinylacetate (PVAc) based D3 adhesive that has been specifically developed to fulfil the market need for low formaldehyde bonding in flat lamination applications. Holzklebstoffe / Woodworking Adhesives RAKOLL® ECO 3 PVAc adhesive is allowing customers to sucessfully achieve the technology transfer from ureaformaldehyde adhesives to vinylacetate based adhesives whilst maintaining the required high bonding performance. The performance of RAKOLL® ECO 3 PVAc adhesive is very versatile and delivers high performance for furniture production, parquet flooring, door production and solid wood bonding. RAKOLL® ECO 3 PVAc adhesive can be used for cold, hot, high frequency and short cycle presses.

Woodworking Adhesives EU 2010 02 SeS 0154 EN Collaborating for Greater Success With the full strength of our innovation, performance and knowledge behind you, H.B. Fuller works tirelessly to invent new products and tailor formulations to help you achieve greater success. As your focused partner, H.B. Fuller delivers the technical support and value adding solutions you need. Do you have a specific challenge that H.B. Fuller can help you navigate? Weʼre eager to be your partner for adhesives and solutions. Typical applications n Flat lamination of HPL n Flat lamination of Paper and veneer n Millwork n Edge/face gluing n Finger jointing n Window scantling Improved Mileage Customers can typically reduce their adhesive consumption by up to 30%. Energy savings Compared to ureaformaldehyde adhesives that traditionally require higher press through lower temperatures, RAKOLL® ECO 3 PVAc adhesive requires lower press temperatures of press temperatures approximately 70°C, resulting in energy savings. Shorter pressing time At 70°C a shortened pressing time of only 40 seconds is required for for common veneers, compared to 60-90 seconds with ureaformaldehyde adhesives. One component adhesive No need for mixing machines: - Investment savings - Reduced waste - Eliminates mixing time Versatility RAKOLL® ECO 3 PVAc adhesive is used for cold and warm pressing and can also be used on difficult to bond woods. Flexible glued joint PVAc glues are thermoplastic systems and the cured glued joints remain significantly more flexible than with duroplastic systems like ureaformaldehyde adhesives. Environment No solvents or formaldehydes are used for the production of RAKOLL® ECO 3 PVAc adhesive. Advantages of Rakoll® ECO 3 compared to ureaformaldehyde adhesives: www.hbfuller.com info-europe@hbfuller.com © H.B. Fuller Company 2011 Our Focus is Clear. Perfecting Adhesives. IMPORTANT: The information, products, specifications, procedures and recommendations herein (together “information”) are based on our experience, and we believe to be accurate. No representation, guarantee or warranty is made as to the accuracy or completeness of the information or that the information will avoid losses or damages or give desired results. It is the purchasers sole responsibility to test and determine the suitability of any information for the intended use. Tests should be repeated if materials or conditions change in any way. No employee, distributor or agent has any right to change these facts and offer a guarantee of performance. H.B. Fuller Company hbfuller @GlueTalk gluetalkwww.hbfuller.com

APPROVED HOT MELT ADHESIVES FOR HOMAG EDGEBANDING SYSTEMS AND COMPLETE LINE EIMEA www.hbfuller.com/wood-adhesives EVA | PO | PUR

High Pressure Laminate (HPL) Continuous Pressure Laminate (CPL) PVC - ABS until 2 mm PVC - ABS above 2 mm Solid Wood Veneer Filling the Groove Lamination Processing Centre Edge Sealing Foil Straight Edges Softforming Direct Postforming BAZ Shaped part through feed machines Complete Line Application Material RAKOLL K4/581 LV® RAKOLL K4/570® RAKOLL Supermelt Professional® RAKOLL 5439® RAKOLL U 320® RAKOLL Kantensiegel 3090® RAKOLL M 950® RAKOLL 5728® RAKOLL 5437 PLUS® RAKOLL 4020® RAKOLL HP 2/A® TYPE EVA PO PUR PVAC Speed m/min <50 <50 <50 5-20 -80 -70 -70 -100 -70 -70 <50 APPLICATION LIST For more information, visit www.hbfuller.com/wood-adhesives. © H.B. Fuller Company, 2022 EU 2022 12 PSG 0062 EN IMPORTANT: It is the user’s responsibility to test and determine the suitability of a product for the user’s intended use. Any product samples provided for testing are provided in accordance with standard limited warranties as stated on our technical data sheets, and the H.B. Fuller General Terms and Conditions of Sale apply. All other terms are rejected. ® and ™ are trademarks of H.B. Fuller Company (“H.B. Fuller”) or an affiliated company of H.B. Fuller, and is registered in the European Community and other countries. Join the Conversation | www.hbfuller.com/connect RAKOLL TE 5707® RAKOLL Supermelt Plus®

Adhesive Selection Guide for Interior Door Manufacturing WOOD AND COMPOSITES Door manufacturing continues to evolve with new materials, process efficiencies and innovations while consumer expectations continue to grow. Today’s adhesives must provide flexibility, speed and wider adhesion performance with high-end use reliability. Discover our modern and sustainable range of adhesives for the typical processes and applications of interior door manufacturing. D3 AND D4 CERTIFIED PVAc ADHESIVES Viscosity Open Time Product Name Key Properties pH-Value (mPas) at 20ºC (min) D3 Adhesives Rakoll® 4330 Developed for foaming application for improved surface finishing 9,000 3 8-12 and wetting Rakoll® GXL 3 Easy-to-apply and suitable for many processing conditions, 13,000 3 8-12 provides very strong bonding Rakoll® ECO 3 Easy-to-apply and suitable for many processing conditions, 11,500 3 12 recommended for UF replacement D4 Adhesives Rakoll® GXL 4 One-component adhesive emulsion, strong adhesion to many 5,500 3,5 8-9 difficult-to-bond woods, quick strength properties immediately after bonding, performs very well on High Frequency (HF) presses Rakoll® ECO 4 One-component adhesive emulsion, suitable for many processing 5,500 3,5 8-9 conditions PROFILE WRAPPING THERMOPLASTIC HOT MELTS Applicaton Technology Line Speed Coat Product Name Material foil (Roller or slot Application Temp. ºC (Polyolefine, (m/min) weight nozzle) EVA…) Rakoll® 5437 >20 pretreated PP foils, PVC, 30 - 100 g/m2 nozzle 160-190 PO veneer, CPL and decorative paper foils Rakoll® U 320 >20 PVC, veneer, CPL and 30 - 100 g/m2 roller/nozzle 160-180 EVA decorative paper foils

ABOUT H.B. FULLER COMPANY Since 1887, H.B. Fuller has been a leading global adhesives provider focusing on perfecting adhesives, sealants and other specialty chemical products to improve products and lives. H.B. Fuller’s commitment to innovation brings together people, products and processes that answer and solve some of the world’s biggest challenges. Our reliable, responsive service creates lasting, rewarding connections with customers in electronics, disposable hygiene, health and beauty, transportation, aerospace, clean energy, packaging, construction, woodworking, general industries and other consumer businesses. And, our promise to our people connects them with opportunities to innovate and thrive. For more information, visit www.hbfuller.com Join the Conversation www.hbfuller.com/connect IMPORTANT: It is the user’s responsibility to test and determine the suitability of a product for the user’s intended use. Any product samples provided for testing are provided in accordance with standard limited warranties as stated on our technical data sheets, and the H.B. Fuller General Terms and Conditions of Sale apply. All other terms are rejected. ® and ™ are trademarks of H.B. Fuller Company (“H.B. Fuller”) or one of its affiliated entities. © H.B. Fuller Company, 2021. EU 2021 03 PSG 0008 EN EDGEBANDING - HOT MELTS Heat Line Speed Product Name Key Properties Technology Resistance (ºC) (m/min) Rakoll® TE 5728 High heat resistance, low stringing properties for clean and up to 110 20-80 PO efficient processing, thin glue line for good finishing Rakoll® K 4/581 LV NAT Designed to be compatible with most edgebanding substrates, up to 75 5-70 EVA and typical application speeds and settings EDGEBANDING - HMMC Viscosity Application Product Name Key Properties Materials Application (mPas) Temp. (ºC) at 160ºC Rakoll® 4020 Low monomer, good flow properties, fast ABS, PP, PVC, Slot nozzle, 50,000 120-150 melting, high initial strength, good cold and Veneer, Melamine roller heat resistance and Solid Wood edges DOOR LAMINATION - HMMC PROFILE WRAPPING - HMMC Application Open Green Pre Application Additional Product Name Materials (Roller or Time Strength Heating Temp. ºC Information slot nozzle) Rakoll® 4654 Medium Wooden materials, High Slot nozzle Yes 120-140 Specially recommended for plastics, ... low ambient temperatures. Rakoll® 4655 Short Wooden materials, Extremely Slot nozzle Yes 130-150 Specially recommended for plastics, ... High high ambient temperatures. Viscosity Open Time Product Name Key Properties Materials Application (mPas) (min) at 120ºC Rapidex® NP 2075 LT Very high initial strength, provides very PVC, ABS, PC Nozzle, 3 45,000 good bonding on tensioned substrates and veneer roller Rakoll® 5010 Low monomer, high initial strength, shows Wood, XPS, EPS, Roller Up to 6 14,500 excellent adhesion to typical wood EPS, metal textiles, substrates and decorative materials PUR-foams, plastics like PVC, ABS, PC, GRP, aluminum and metalloid

MATERIALS WOOD AND COMPOSITES Thermoplastic Hot Melts Profile Wrapping Selection Guide Our thermoplastic hot melt range for profile wrapping and flat lamination includes products for all processes and materials typically used in this industry. We also cover all possible customer demands in terms of application and final performance. • The materials used for wrapping wood and MDF profiles can vary from plastic films like PVC and PP to paper, CPL, veneer, etc. ABS, Melamine. PRODUCTION PARAMETERS FOR PROFILE WRAPPING EVA-/PO-TECHNOLOGY • Application d by roller, nozzle, slot die • Room and material temperatures: minimum +15 °C • Application temperatures: from 170 – 200 °C • Line speeds: from 6 to 70 m/min (depends of the product) • Relative humidity approx. 40 to 60% PW AND FLAT LAMINATION TYPICAL COATING WEIGHT Paper of density 30-60 gr/m2 PvC foils and paper of density 80-120 gr/m2 CPL and veneer with paper backing HPL and veneer without backing 40 60 100 120 150 >200 gr/m2

Join the Conversation | www.hbfuller.com/connect For more information, visit www.hbfuller.com/eimea IMPORTANT: It is the user’s responsibility to test and determine the suitability of a product for the user’s intended use. Any product samples provided for testing are provided in ac- cordance with standard limited warranties as stated on our technical data sheets, and the H.B. Fuller General Terms and Conditions of Sale apply. All other terms are rejected. ® are trademarks of H.B. Fuller Company (“H.B. Fuller”) or one of its affiliated entities. © H.B. Fuller Company, 2020. EU 2020 11 PSG 0854 EN ABOUT H.B. FULLER Since 1887, H.B. Fuller has been a leading global adhesives provider focusing on perfecting adhesives, sealants and other specialty chemical products to improve products and lives. H.B. Fuller’s commitment to innovation brings together people, products and processes that answer and solve some of the world’s biggest challenges. Our reliable, responsive service creates lasting, rewarding connections with customers in electronics, disposable hygiene, health and beauty, medical, transportation, aerospace, clean energy, packaging, construction, woodworking, general industries and other consumer businesses. And, our promise to our people connects them with opportunities to innovate and thrive. PROFILE WRAPPING PORTFOLIO Coat Applicaton Technology Product Line Speed Material foil weight (Roller or slot Application temperature (Polyolefine, nozzle) EVA…) Rakoll® 5437 >20 m/min pretreated PP foils, PVC, 30 - 100 g/m2 nozzle 160-190ºC PO veneer, CPL and decorative paper foils Rakol® Surewrap Plus >15 m/min pretreated PP foils, PVC, 30 - 100 g/m2 nozzle Plastic foils 160-170ºC PO veneer, CPL and decorative paper, veneer 190-200ºC paper foils CPL 200-210ºC Rakoll® TE 5724 >15 m/min veneer 120 -250 g/m2 roller Premelter 150-170ºC EVA Roller 180-200ºC Rakoll® U 290 >20 m/min PVC, veneer, CPL and 30 - 100 g/m2 roller/nozzle Roller 160-180ºC EVA decorative paper foils Rakoll® U 320 >20 m/min PVC, veneer, CPL and 30 - 100 g/m2 roller/nozzle Roller 160-180ºC EVA decorative paper foils Swift®therm 4362 >20 m/min pretreated PP foils, PVC, 30 - 100 g/m2 nozzle 180-200ºC PO Natural veneer, CPL and decorative paper foils HOT MELTS ARE AVAILABLE IN BIG BAGS AND 25 KG STANDARD PACKAGING

PRODUCT ADVANTAGES • Low monomer: contains less than 0.1% monomer isocyanate and therefore is free from hazardous labelling, providing environmental benefits to the workplace • Safety and compliance: Rakoll 4020 provides safe and non-hazardous conditions at workplaces • Easy processability: The combination of open time and initial strength enables an easy and robust process. In addition, its stability on the application roller provides homogeneous coat weight during processing • High initial strength: The initial strength makes the product suitable for rigid materials TYPICAL APPLICATIONS • Hot melt is applied with rollers or slot-dies to narrow board’s face, and immediately pressed after the application Rakoll® 4020 WOODWORKING Adhesives with monomer isocyanate content below 0.1 % are not subject to labelling restrictions with regard to hazardous substances. Rakoll 4020 is label- free and has good initial strength, being suitable for various edge materials. H.B. Fuller wants to go a step further in sustainability, by offering customers the assurance of reliable adhesives that also contribute to lowering hazardous emissions. Rakoll 4020 is a reactive hot melt adhesive for edgebanding developed to fulfil the requirements and demand of the market for non-labelling obligation high performance reactive hot melt adhesive with low monomer content (<0.1%). NozzleRoller

H.B. Fuller is a prominent and innovative player in the furniture manufacturing industry, recognized for its unwavering commitment to excellence and cutting-edge solutions. With a long history in the industry, the company has solidified its position as a trusted partner and a driving force behind advancements in furniture manufacturing processes. As a global leader in adhesive technologies, H.B. Fuller's profound impact on the industry is characterized by its ability to enhance product quality, durability, and efficiency. From bonding intricate joinery to enhancing the longevity of surfaces exposed to moisture, heat, and wear, H.B. Fuller adhesives are proven to meet and exceed the industry's standards. By fostering a culture of collaboration and continuous improvement, the company remains at the forefront of research and development, consistently introducing adhesives that not only meet but exceed the evolving needs of furniture manufacturers. WOODWORKING GUIDE ADHESIVE EXPERTISE TO SUPPORT YOUR BUSINESS JOURNEY

Product Technology Viscosity pH Open Time (min) Key Features Rakoll® 4330 D3 9,000 mPas @20 °C 3 8-12 Developed for foaming application for improved surface finishing and wetting Rakoll® GXL 3 D3 13,000 cP @20 °C 3 8-12 Easy-to-apply and suitable for many processing conditions, provides very strong bonding Rakoll® ECO 3 D3 11,500 cP @20 °C 3 12 Easy-to-apply and suitable for many processing conditions, recommended for UF replacement Rakoll® GXL 4 D4 5,500 cP @20 °C 3,5 8-9 One-component adhesive emulsion, strong adhesion to many difficult-to-bond woods, quick strength properties immediately after bonding, performs very well on High Frequency (HF) presses Rakoll® ECO 4 D4 5,500 cP @20 °C 3,5 8-9 One-component adhesive emulsion, suitable for many processing conditions Product Technology Line Speed Coat Weight Application Application Temperature Material Foil Rakoll® 5437 Plus PO >20 30 - 100 g/m2 nozzle 160-190 °C pretreated PP foils, PVC, veneer, CPL and decorative paper foils Rakoll® U 320 EVA >20 30 - 100 g/m2 roller/nozzle 160-190 °C PVC, veneer, CPL and decorative paper foils Product Technology Open Time Green Strenth Application Application Temperature Additional Information Rakoll® 4654 HMMC Long High slot nozzle 150-190 °C Specially recommended for low ambient temperatures Pre-heating needed Materials: wooden materials, plastics, ... Rakoll® 4655 HMMC Short Extremely high slot nozzle 130-150 °C Specially recommended for high ambient temperatures Pre-heating needed Materials: wooden materials, plastics, ... PRODUCT GUIDE D3 AND D4 CERTIFIED PVAC ADHESIVES PROFILE WRAPPING THERMOPLASTIC HOT MELTS PROFILE WRAPPING HMMC

Product Technology Viscosity Open Time (min) Application Key Features Rapidex® NP 2075 LT HMMC 45,000 mPas @120 °C 3 Nozzle, roller Very high initial strength, provides very good bonding on tensioned substrates Materials: PVC, ABS, PC and veneer Rakoll® 5010 HMMC 14,500 cP @120 °C up to 6 Roller Low monomer, high initial strength, shows excellent adhesion to typical wood substrates and decorative materials Materials: Wood, XPS, EPS, metal textiles, PUR-foams, plastics like PVC, ABS, PC, GRP, aluminum and metalloid FLAT LAMINATION Product Technology Viscosity Application Application Temperature Key Features Rakoll® 4020 HMMC 50,000 cP @160 °C Slor nozzle, roller 120-150 °C Low monomer, good flow properties, fast melting, high initial strength, good cold and heat resistance Materials: ABS, PP, PVC, Veneer, Melamine and Solid Wood edges EDGEBANDING HMMC Product Technology Heat Resistance Line Speed Key Features Rakoll® TE 5728 PO up to 110 ºC 20-80 High heat resistance, low stringing properties for clean and efficient processing, thin glue line for good finishing Rakoll® K 4/581 LV NAT EVA up to 75 ºC 5-70 Designed to be compatible with most edgebanding substrates, and typical application speeds and settings EDGEBANDING HOT MELTS

Since 1887, H.B. Fuller has been a leading global adhesives provider focusing on perfecting adhesives, sealants and other specialty chemical products to improve products and lives. H.B. Fuller’s commitment to innovation and sustainable adhesive solutions brings together people, products and processes that answer and solve some of the world's biggest challenges. Our reliable, responsive service creates lasting, rewarding connections with customers in electronics, disposable hygiene, medical, transportation, aerospace, clean energy, packaging, construction, woodworking, general industries and other consumer businesses. And, our promise to our people connects them with opportunities to innovate and thrive. Learn more at www.hbfuller.com/wood-adhesives ABOUT H.B. FULLER ABOUT H.B. FULLER