View FIORI DSERIES DUMPER flipbook.
D50,90,100,120
D50All pictures shown are for illustrative purposes only and may contain optional equipment. DUMPER System The D 50 is anextremely versatile vehicle for transporting construction site material, suitable for areas with limited room for manoeuvre, such as alleyways, construction sites in confined spaces or tunnels, as well as on unpaved and off-road terrain. The articulated chassis, the low centre of gravity, and the oscillating front axle make it stable and handleable even on the roughest terrain, while the tested reversible driving system and generously sized cab (with ROPS-FOPS) featured as standard enhance visibility and above all, make the FIORI GROUP D 50 the safest 5.0 tonne dumper on the market. Featuring a strictly hydrostatic transmission, with 180° dump body rotation and the ability to unload on three sides, this dumper is not only the smallest machine in its class, but also excels in terms of traction and manoeuvrability on harsh terrain. Any area can be reached or travelled over, moving in both directions with the utmost safety and comfort thanks to the pioneering reversible driver's seat.
FIORI AUSTRALIA | 6 Kelly Street | AUSTRAL NSW 2179 | Tel. 1300 342 539 | DUMPER SYSTEM D 50BRAKES Internal oil-bath disc service and emergency brakes acting on the 4 wheels, activation with pump on independent dual circuit. Negative type parking brake, with internal oil-bath discs on the front axle and electro- hydraulically controlled release. ELECTRIC SYSTEM Battery: .........................12 V - 80 Ah (600 A) Led road light system, rear working lights. AXLES AND WHEELS Front load-bearing, oscillating (± 6.5°) with planetary reduction gears on the wheel hubs. Rear load-bearing with planetary reduction ge- ars on the wheel hubs. Tyres .......................................12.5 -18 16PR Turf tyres (optional) ............12.5/80 -18 16PR DIESEL ENGINE 4X4 FOUR-WHEEL DRIVE Hydrostatic “automotive” transmission with variable displacement pump and variable displacement hydraulic motor with electro-hydraulic control, and reverse gear control on the stee- ring wheel. SPEED Slow Fast Stage IIIA / Tier 3 YANMAR 4TNV88 CABIN Open cabin designed according to ROPS & FOPS Lev. I (optional FOPS Lev. II), criteria, windows on three sides. Optional cab doors. Sliding window on cabin door. 180° pivoting driving post. Anatomic seat with flexible suspension and height adjustment, seat belts. Driving and equipment controls with ergonomic arrangement. LCD TV display with camera for rear visibility. STEERING Assisted by means power steering acting on 2 half-frames by means of two opposed jacks.DUMP BODY Dump body tilting by means of 1 double-acting jack. Orientation over 180° for trilateral un- loading by means of two opposing jacks. Struck capacity .................................. 2,200 L SAE heaped capacity ........................2,750 L EQUIPMENT HYDRAULIC SYSTEM Gear pump Max. flow rate: .................................36 L/min. Maximum pressure: ...........................200 bar 2 - elements distributor. Aluminium heat exchanger for hydraulic oil cooling. Pressurised closed-circuit intake with oil filter replaceable from the outside. Tier 4 Final EPA WEIGHTS Operating weight: .............................3,900 kg Max gross weight: .............................8,900 kg load-carring capacity: .................... 5,000 kg Stage V SERVICE REFILL CAPACITIES Fuel tank: ................................................ 50 L Total hydraulic system capacity: .............74 L Engine oil: ................................................7 kg Model : Type : Total displacement: Injection : Aftertreatment sys.: Cooling : Maximum power: Adj. power: Maximum torque: Alternator : forward gears reverse gears 0 - 7.1 km/h 0 - 21.0 km/h 0 - 0 - 21.0 km/h 7.1 km/h Aspirated 2,190cc - 4 in line Direct with mechanical control - air water, dry air filter 36.9 kW (49 hp) 32 kW (44 hp) (2,600 rpm) 139 Nm (1,200 rpm) 12V - 40 A KOHLER series KDI1903TCRTurbo Intercooler 1,861cc - 3inline Electronic control withCommonRail EGR + DOC air water, dryairfilter 42 kW (56hp) 42 kW (2,600rpm) 225 Nm (1,500rpm) 12V - 55A KOHLER series KDI 1903 TCR Turbo Intercooler 1,861cc - 3 in line Electronic control with Common Rail EGR + DOC + DPF air water, dry air filter 42 kW (56 hp)42 kW (2,600 rpm) 225 Nm (1,500 rpm) 12V - 55 A fioriaustralia.com.au
D 90Sw DUMPER System Featuring a 4x4x4 hydrostatic transmission (i.e. four-wheel drive and four-wheel steering for a smaller turning radius), the FIORI SW-series dumpers are equipped with a 180° positioning tipping body for unloading on three sides, which ensures maximum coverage of the construction site. With a 9,000 kg load capacity, the D 90 SW model is the most suitable dumper for conventional applications where manoeuvrability, visibility, and comfort (low cab, oscillating front axle with tilt-limiting system) are essential requirements. The operator protection guaranteed by the standard Level II ROPS/FOPS cab and the unrivalled visibility allowed by the exclusive driving reversibility system, guarantee the operator the utmost safety when driving the D 90 SW in either direction. All pictures shown are for illustrative purposes only and may contain optional equipment.
DUMPER SYSTEM SWD 90 AXLES AND WHEELS Front load-bearing, oscillating (± 6°) and steering with planetary reduction gears on the wheel hubs. Rear load-bearing and steering with planetary reduction gears on the wheel hubs and directly flanged gearbox. Tyres .................................. 405/70-20 18PR Turf tyres (optional) .................445/65 - R22.5 4X4 FOUR-WHEEL DRIVE Hydrostatic “automotive” transmission with variable displacement pump and variable displacement hydraulic motor with electro- hydraulic control, and reverse gear control on the steering wheel. Electro-hydraulically controlled mechanical gearbox for “working speed” and “road trans- fer” speed. SPEED BRAKES Internal oil-bath disc service and emergency brakes acting on the 4 wheels, activation with miniservo pump on independent dual circuit. Negative type parking brake, with internal oil- bath discs on the rear axle and electro-hydrau- lically controlled release. STEERING Assisted by means of load-sensing power steering with double displacement on 4 steer- ing wheels; steering selection device for: 2 steering wheels, 4 steering wheels. crab steer- ing. DUMP BODY Dump body with tilting by means of 2 double- acting jacks. Orientation over 180° for trilateral unloading by means of “heavy-duty” ball fifth wheel, with hydraulic rotation and automatic locking by means of negative brake. Struck capacity ..................................3,800 L SAE heaped capacity ........................5,200 L EQUIPMENT HYDRAULIC SYSTEM Gear pump Max. flow rate: .................................45 L/min. Maximum pressure: ...........................230 bar 2 - elements distributor. Aluminium heat exchanger for hydraulic oil cooling. Pressurised closed-circuit intake with oil filter replaceable from the outside. CABIN Closed cabin with heating system, designed in accordance with ROPS and FOPS. Lev. II. 180° pivoting driving post. Anatomic seat with flexible suspension and height adjustment, seat belts. Driving and equipment controls with ergonom- ic arrangement. Sliding window on cabin door. LCD TV display with camera for rear visibility. WEIGHTS Operating weight .............................5,600 kg SERVICE REFILL CAPACITIES Fuel tank in cross-linked polyethylene...... 95 L Total hydraulic system capacity: ...........110 L Engine oil: ................................................8 kg Ist IInd 0 - 7.2 km/h IIIrd 0 - 10.0 km/h IVth 0 - 25.0 km/h 4 forward gears 2 reverse gears 0 - 3.0 km/h 0 - 3.0 km/h 0 - 10.0 km/h 0 - 10.0 km/h 0 - 3.0 km/h Max gross weight: ..........................14,800 kg load-carring capacity: ......................9,000 kg ELECTRIC SYSTEM Battery: ......................12 V - 135 Ah (850 A) Road light system, rear working lights. DIESEL ENGINE No emission compliance PERKINS serie 1104 Aspirated 4,400cc - 4 in linea Stage IIIA / Tier 3 Tier 4 Final EPA Stage VModel: Type: Total.displacement: Injection: Aftertreatment.sys: Cooling: Maximum.power: Adj.power.: Maximum.torque: Alternator: PERKINS serie 1104 KOHLER serie KDI 2504 Turbo Intercooler 2,482cc - 4 in line KOHLER serie KDI 2504 Turbo Intercooler 2,482cc - 4 in line Turbo 4,400cc - 4 in lineMechanical control with direct injection Mechanical control with direct injection Electronic control with Common Rail Electronic control with Common Rail- air water, dry air filter 64.5 kW (87 hp) 64 kW (2,400 rpm) 293 Nm (1,400 rpm) 12V - 65 A - EGR + DOC air water, dry air filter 55.4 kW (74.3 hp) 55.4 kW (2,300 rpm) 300 Nm (1,500 rpm) 12V - 80 A EGR + DOC + DPF air water, dry air filter 74 kW (101 hp) 70 kW (2,200 rpm) 392 Nm (1,400 rpm) 12V - 65 A air water, dry air filter 55.4 kW (74.3 hp) 55.4 kW (2,300 rpm) 300 Nm (1,500 rpm) 12V - 90 A FIORI AUSTRALIA | 6 Kelly Street | AUSTRAL NSW 2179 | Tel. 1300 342 539 | fioriaustralia.com.au
D 100Sw DUMPER System With a 10,000 kg load capacity and high-power engine, the D 100 SW is the ideal hydrostatic transmission dumper for heavy-duty applications, on construction sites located in mountainous areas or on steep slopes. The only four-wheel drive off-road vehicle in the world to also feature four-wheel steering, as well as a Level II ROPS/FOPS closed cab, reversible driver's seat and a tipper body with 180° positioning for unloading on three sides, the D 100 SW excels in terms of handling, visibility, comfort, and safety. The small turning radius, the oscillating front axle with tilt-limiting system, and the low cab and operator position complete the package offered for this proudly top-end model. All pictures shown are for illustrative purposes only and may contain optional equipment.
FIORI AUSTRALIA DUMPER SYSTEM SWD 100 AXLES AND WHEELS Front load-bearing, oscillating (± 6°) and steering with planetary reduction gears on the wheel hubs. Rear load-bearing and steering with planetary reduction gears on the wheel hubs and directly flanged gearbox. Tyres ...................................... 18 -19.5 16PR Turf tyres (optional) .................445/65 - R22.5 4X4 FOUR-WHEEL DRIVE Hydrostatic “automotive” transmission with va- riable displacement pump and variable displa- cement hydraulic motor with electro-hydraulic control, and reverse gear control on the stee- ring wheel. Electro-hydraulically controlled mechanical gearbox for “working speed” and “road tran- sfer” speed. SPEED BRAKES Internal oil-bath disc service and emergency brakes acting on the 4 wheels, activation with miniservo pump on independent dual circuit. Negative type parking brake, with internal oil- bath discs on the rear axle and electro-hydrau- lically controlled release. STEERING Assisted by means of load-sensing power steering with double displacement on 4 steer- ing wheels; steering selection device for: 2 steering wheels, 4 steering wheels, crab steer- ing. DUMP BODY Dump body with tilting by means of 2 double- acting jacks. Orientation over 180° for trilateral unloading by means of “heavy-duty” ball fifth wheel, with hydraulic rotation and automatic locking by means of negative brake. Struck capacity ..................................3,800 L SAE heaped capacity ........................5,200 L EQUIPMENT HYDRAULIC SYSTEM Gear pump Max. flow rate: .................................45 L/min. Maximum pressure: ...........................230 bar 2 - elements distributor. Aluminium heat exchanger for hydraulic oil cooling. Pressurised closed-circuit intake with oil filter replaceable from the outside. CABIN Closed cabin with heating system, designed in accordance with ROPS and FOPS. Lev. II 180° pivoting driving post. Anatomic seat with flexible suspension and height adjustment, seat belts. Driving and equipment controls with ergonom- ic arrangement. Sliding window on cabin door. LCD TV display with camera for rear visibility. WEIGHTS Operating weight .............................5,700 kg SERVICE REFILL CAPACITIES Fuel tank in cross-linked polyethylene,......95 L Total hydraulic system capacity: ...........110 L Engine oil: ................................................8 kg I° II° III° IV° 4 forward gears 2 reverse gears 0 - 3.7 km/h 0 - 3.7 km/h 0 - 11.8 km/h 0 - 11.8 km/h 0 - 3.7 km/h 0 - 9.5 km/h 0 - 11.8 km/h 0 - 30.0 km/h Max gross weight: ..........................16,000 kg load-carring capacity: ....................10,000 kg ELECTRIC SYSTEM Battery: ......................12 V - 135 Ah (850 A) Road light system, rear working lights. DIESEL ENGINE No emission compliance PERKINS serie 1104 Turbo 4,400cc - 4 in linea Stage IIIA / Tier 3 Tier 4 Final EPA Stage VModel: Type: Total displacement: Injection: Aftertreatmentsys.: Cooling: Maximum.power: Adj.power.: Maximum.torque: Alternator: PERKINS serie 1104KOHLER series KDI 3404 TCRSCR Turbo Intercooler 3,400cc - 4 in line PERKINS series 904J-E36TA Turbo Intercooler 4,400cc - 4 in line Turbo Intercooler 3,600cc - 4 in lineMechanical control with direct injection Mechanical control with direct injection Electronic control with Common Rail Electronic control with Common Rail - air water, dry air filter 82.5 kW (112 hp) 82 kW (2,400 rpm) 404 Nm (1,400 rpm) 12V - 65 A - air water, dry air filter 83 kW (113 hp) 83 kW (2,200 rpm) 418 Nm (1,400 rpm) 12V - 65 A EGR + DOC + SCR air water, dry air filter 90 kW (122 hp) 90 kW (2,200 rpm) 500 Nm (1,400 rpm) 12V - 90 A EGR + DOC + DPF + SCR air water, dry air filter 90 kW (122 hp) 90 kW (2,400 rpm) 500 Nm (1,500 rpm) 12V - 120 A | 6 Kelly Street | AUSTRAL NSW 2179 | Tel. 1300 342 539 | fioriaustralia.com.au
DUMPER SYSTEM The D 120 SW is the high-performance, versatile and safe dumper that is ideal for transpor- ting and unloading large quantities of materials thanks to its 12,000 kg capacity. SW dumpers made in Fiori feature 4x4x4 vehicles with hydrostatic transmission equipped with a tipper body with 180° orientation for three-sided unloading. The reversible driver's station allows for maximum visibility, and thanks to the level II ROPS/FOPS cab, the D 120 SW features an excellent level of safety. The four steerable wheels, selectable by the operator in the 2WS, 4WS and "crab" options, allow the D 120 SW exceptional maneuverability, making it the ideal vehicle for material handling (up to more than 6.3 m³) even in tight spaces. Unique in its class, it is distinguished by a small turning radius, equal to that of conventional articulated dump trucks of significantly lower capacities. Images presented are for illustrative purposes only and may contain accessories for a fee. D 120SW
DUMPER SYSTEM SWD 120 AXLES AND WHEELS 4X4 FOUR-WHEEL DRIVE Hydrostatic“automotive” transmission with variable displacement pump and variable displa- cement hydraulic motor with electro- hydraulic control, and reverse gear control on the stee- ring wheel. Electro-hydraulically controlled mechanical gearbox for “working speed” and “road tran- sfer” speed. SPEED BRAKES Internal oil-bath disc service and emergency brakes acting on the 4 wheels, activation with miniservo pump on independent dual circuit. Negative type parking brake, with internal oil- bath discs on the rear axle and electro-hydrau- lically controlled release. STEERING Assisted by means of load-sensing power steering with double displacement on 4 steer- ing wheels; steering selection device for: 2 steering wheels, 4 steering wheels - crab steering. DUMP BODY Dump body with tilting by means of 2 double- acting jacks. Orientation over 180° for trilateral unloading by means of “heavy-duty” ball fi fth wheel, with hydraulic rotation and automatic locking by means of negative brake. Struck capacity ..................................5,000 L SAE heaped capacity ........................6,300 L EQUIPMENT HYDRAULIC SYSTEM Gear pump Max. fl ow rate: .................................45 L/min. Maximum pressure: ...........................210 bar 2 - elements distributor. Aluminium heat exchanger for hydraulic oil cooling. Pressurised closed-circuit intake with oil filter replaceable from the outside. CAB\ Closed cab with heating system, designed in accordance with ROPS and FOPS II, stand- ard. 180° pivoting driving post. Anatomic seat with fl exible suspension and height adjustment, seat belts. Driving and equipment controls with ergonom- ic arrangement. Sliding window on cabin door. LCD TV display with camera for rear visibility. WEIGHTS Operating weight .............................6,300 kg SERVICE REFILL CAPACITIES Fuel tank in cross-linked polyethy lene.......95 L Total hydraulic system capacity: ...........110 L Engine oil: ................................................8 kg Front load-bearing, oscillating (± 6°) and steering with planetary reduction gears on the wheel hubs. Rear load-bearing and steering with planetary reduction gears on the wheel hubs and directly fl anged gearbox. Tyres (A) ...................................500/60 R22.5 Tyres (B) ...................................600/50 R22.5 I° II° III° IV° 4 forward gears 2 reverse gears 0 - 3.7 km/h 0 - 9.5 km/h 0 - 12.9 km/h 0 - 30.0 km/h 0 - 3.7 km/h 0 - 3.7 km/h 0 - 12.9 km/h 0 - 12.9 km/h Max gross weight: ..........................18,300 kg load-carring capacity: ....................12,000 kg ELECTRIC SYSTEM Battery:......................12 V - 135 Ah (850 A) Led road light system, rear working lights. DIESEL ENGINE No emission compliance PERKINS serie 1104 Turbo 4,400cc - 4 in linea Stage IIIA / Tier 3 Tier 4 Final EPA Stage V PERKINS series 904J-E36TA Turbo Intercooler 3,600cc - 4 in lineModel: Type: Total.displacement: Injection: Aftertreatmentsys.: Cooling: Maximum.power: Adj.power.: Maximumtorque: Alternator: PERKINS serie 1104KOHLERseries KDI 3404 TCRSCR Turbo Intercooler 3,400cc - 4 in line Turbo Intercooler 4,400cc - 4 in lineMechanical control with direct injection Mechanical control with direct injection Electronic control with Common Rail Electronic control with Common Rail - air water, dry air fi lter 82.5 kW (112 hp) 82 kW (2,400 rpm) 404 Nm (1,400 rpm) 12V - 65 A - air water, dry air fi lter 83 kW (113 hp) 83 kW (2,200 rpm) 418 Nm (1,400 rpm) 12V - 65 A EGR + DOC + SCR air water, dry air fi lter 90 kW (122 hp) 90 kW (2,200 rpm) 500 Nm (1,400 rpm) 12V - 90 A EGR + DOC + DPF + SCR air water, dry air fi lter 90 kW (122 hp) 90 kW (2,400 rpm) 500 Nm (1,500 rpm) 12V - 120 A FIORI AUSTRALIA | 6 Kelly Street | AUSTRAL NSW 2179 | Tel. 1300 342 539 | fioriaustralia.com.au
fioriaustralia.com.au| 6 Kelly Street | AUSTRAL NSW 2179 | Tel. 1300 342 539 |FIORI AUSTRALIA
fioriaustralia.com.au| 6 Kelly Street | AUSTRAL NSW 2179 | Tel. 1300 342 539 |FIORI AUSTRALIAAs part of the DWL Machinery and FIORI Australia partnership, SEM Hire will incorporate selected FIORI machines into its equipment hire fleet, providing customers with the opportunity to experience the FIORI range firsthand on real projects. The FIORI machines will be available for short- and long-term hire, demonstrations and customer trials, allowing contractors to assess their performance, manoeuvrability, payload capacity and versatility across a wide range of applications. This approach gives customers the confidence to put FIORI machines to work before making a purchase decision, while providing DWL Machinery with valuable opportunities to demonstrate the capability and productivity of the range in real-world operating conditions. Through SEM Hire, FIORI customers will have access to a growing fleet of modern, productive machinery backed by DWL Machinery's national sales, parts and aftersales support network. Experience the FIORI difference. Put one to work on your next project.
fioriaustralia.com.au| 6 Kelly Street | AUSTRAL NSW 2179 | Tel. 1300 342 539 |FIORI AUSTRALIADWL Machinery is proud to announce its appointment as the new National FIORI Dealer in Australia, operating under FIORI Australia. Building on DWL Machinery’s established experience in construction, earthmoving and equipment sales, the partnership brings the FIORI range of high-performance wheeled dumpers to customers across Australia. The FIORI range combines compact dimensions, exceptional manoeuvrability, impressive payload capacity and rugged construction, providing practical material-handling solutions for construction, civil, landscaping, infrastructure, agriculture and demanding off-road applications. Through the FIORI Australia network, DWL Machinery will provide national sales, product support, machinery demonstrations, parts and aftersales assistance, backed by DWL’s established machinery expertise and nationwide logistics capabilities. With a growing range of articulated and crab-steer dumpers, FIORI offers solutions for applications where access, versatility and productivity matter — from compact machines for confined sites through to larger-capacity dumpers designed for demanding earthmoving operations. DWL Machinery and FIORI Australia are committed to building a strong national presence for FIORI in the Australian market, delivering quality machinery, responsive support and solutions that keep Australian projects moving. FIORI Australia | Powered by DWL Machinery National Sales • Demonstrations • Parts • Support • Nationwide Delivery