Interior Design Portfolio Jordin Keyser 2026
WORK EXPERIENCE RD JONES AND ASSOCIATES, Baltimore, MD, Interior Designer | October 2023 - Current • Field measured and documented building conditions • Selected and specified furniture, fixtures, equipment and millwork, including layout drawings and detailed product descriptions • Prepared schematic presentations consisting of rendered floor plans, elevations and furniture vignettes • Prepared content (drawings and documentation) for schematic design, design development, and construction document phases. • Prepared construction documents consisting of plans, elevations, details, power and communication locations, reflected ceiling plans and lighting designs, material finishes and furniture layouts • Prepared specifications and schedules with accurate project information for all furniture, plumbing, appliances, lighting and finishes • Approved contractor/architectural/furniture submittals consisting of finishes and shop drawings STUDIO PARTNERSHIP, Sparks, MD, Junior Designer | July 2021 - March 2023 • Assisted the design team and senior staff in all aspects of ID project functions • Prepared content (drawings and documentation) for schematic design, design development, and construction document phases • Prepared specifications and schedules with accurate project information for all furniture, plumbing, appliances, lighting and finishes • Field measured and documented building conditions TONO GROUP, West Chester, PA, Interior Designer | April 2023 - September 2023 • Assisted the design team and senior staff in all aspects of ID project functions • Prepared content (drawings and documentation) for schematic design, design development, and construction document phases • Prepared specifications and schedules with accurate project information for all furniture, plumbing, appliances, lighting and finishes • Field measured and documented building conditions COOK DESIGN GROUP, INC., Westminster, MD, (Part-Time) Autocad Drafter | May 2016 - May 2021 • Assisted the engineer by creating base AutoCAD drawings and prepared content for the design. • Prepared mechanical, plumbing, and electrical details within the construction documents for existing and new projects • Reviewed over finalized construction drawings for no errors in grammar, spelling, or missing information before sending to consul- tants and clients EDUCATION Marywood University, Scranton, PA | 2017-2021 Bachelor of Interior Architecture and Design (NASAD Accredited) • International Interior Design Association (IIDA); Marywood’s PA Chapter (2017-2021) Secretary: 2018-2019 | Co-President: 2020-2021 • Student Council; Interior Architecture (2017-2021) • Summer Orientation Leader (Summer 2018, Summer 2019) • Study Abroad Program: Florence, Italy (Jan. 2020-Feb. 2020) • Tau Sigma Delta National Honor Society (2020-2021) SKILLS AND PROGRAMS Skills: • Leadership • Collaboration • Independently taking initiative • Teamwork • Effective Organization Programs • Revit • AutoCAD • Enscape • Spexx Documentation System • Bluebeam Revu • Adobe Suite RESUME
03 EPICUREAN AT TUSCAN VILLAGE Salem, New Hampshire Multifamily 01 02 ELEVEN AT MONON SQUARE Carmel, Indiana Multifamily DOUBLETREE BY HILTON Austin, Texas Hospitality ADDITIONAL PROJECT EXPERIENCE MULTIFAMILY • Broadstone Vega, Redmond, WA • The Retreat at Market Square, Frederick, MD HOSPITALITY • Asilomar Hotel and Conference Grounds, Pacific Grove, CA • Bethesda North Marriott Hotel and Conference Center, Bethesda, MD • Embassy Suites by Hilton Phoenix Biltmore, Phoenix, AZ TABLE OF CONTENTS EDUCATION • West Chester University Allegheny & Brandywine Hall Kitchen, West Chester, PA
• FF&E Development Specifications Custom Line Drawings - Furniture and Lighting Coordination with Art, Mural, and 3D Rendering Consultants • ID Construction Drawings • Construction Administration Furniture and Lighting Shop Drawing Approvals Construction Finish Submittal Approvals (Procore) • OAC Meetings 01 Epicurean at Tuscan Village Project Information Location: Salem, New Hampshire Year Completed: 2026 Luxury Multifamily | 299 Units | Rougly 11,000 SF Amenity Space | Total 6 Floors Amenities: Resident Lobby, Dogwash, Leasing, Co-working Lounge, Entertainment Kitchen, Clubhouse, Fitness, Outdoor Courtyards Responsibilities Performed: • Schematic Design Presentation Render Textiles onto Furniture Render Plans Completed project photography courtesy of the property owner A curated composition of natural stone, warm wood, darkened metals, and tactile furnishings creates an engaging and timeless interior that is both authentic and reimagined. Layered materiality and moody lighting establish a sophisticated sense of place, delivering a welcoming environment rich in warmth, texture, and visual depth. INSPIRATION Professional Work Firm: RD Jones and Associates Principal: Bernard Holnaider Project Manager: Lauren Christel Role: Interior Designer
Photography by Bernard Holnaider CUSTOM FURNITURE DESIGN DEVELOPMENT 4 1Project #: 3486 Issue Date: 01/09/25 Project Name: 1300 Tuscan Village Apts. Item Description: Large Scale Doublesided Serpentine Sofa Item Number: 9000-9315-UP Item Pricing: 1 ea @ $12,538.10 = $12,538.10 Manufacturer: SNS Group, LLC Source: SNS Group, LLC Revision(s): Area Name: Club Rm/Bar/Lounge/Game Room Contact: Daniel Danic Phone: (305) 913-2392 Fax: Address: 801 Brickell Avenue, Suite 800 Miami FL 33131- Address: 801 Brickell Avenue, Suite 800 Miami FL 33131- Contact: Daniel Danic E-mail: miami@snsgroup.euE-mail: miami@snsgroup.eu Web: www.snsgroup.euWeb: www.snsgroup.eu Mobile: (917) 386-4719Other: (917) 386-4719 Phone: (305) 913-2392 Fax: Description: Custom doublesided serpentine sofa fully and tightly upholstered in COL A with slight crown and waterfall edge in the seat cushion and a rounded back rest. Form of the back rest is to follow the form of the seat cushion. (9) Throw pillows, 22"x22", 50/50 poly/feather with concealed zipper and knife edge, (3) upholstered in COM B with self welt trim, (3) upholstered in COM C with self welt trim, and (3) upholstered in COM D with self welt trim. Sofa to be manufactured in equal segments and ganged together with concealed mechanisms (vendor to provide) and must fit through standard door @ 6'-0" x 6'-8". Sofa's top/back to be fabricated in (3) sections and be produced to separate and attach in field with hidden support posts. Sofa to be supported by plated metal disks throughout. All feet to have commerical grade glides suitable for wood flooring. Refer to ID Drawings for location; Refer to Custom Line Drawings for details. ##### Material/Finish: Metal: Plated metal to look like antique pewter (MTL- 02) - to match designer's sample Dimensions: 236"W x 103"D x 32"H Seat Height: 18"H Seat Depth: 28"D Seat Cushion Style: Tightly Upholstered Back Cushion Style: Tightly Upholstered Sofa Body (COL A): 9000-9315A-UPF; Lilly Kral, LLC; Pattern: Jurassic; Oxfordian; Two-Tone Genuine Leather; ; Width: 702 sqft; sf x 1 sofa = 702 total sf Sofa Pillow 1 (COM B): 9000-9315B-UPF; Pollack; Pattern: 2531/01; Amherst; Driftwood; 50% Acrylic, 50% Polyester; Repeat: 4.75"V; Width: 56.3"W; Finish: Acrylic Latex Backed; Fire Rating: CAL 117- 2013, NFPA 260; Durability: 100,000 Double Rubs; 1 yds x 3 pillows = 3 total yds Sofa Pillow 2 (COM C):9000-9315C-UPF; Cowtan & Tout; Pattern: L9395-02; Baya; Linen; 80% Linen, 20% Acrylic Ground; Repeat: 31"V, 25.25"H; Width: COM/COL: rd jones & associates 400 e. pratt street suite 902 baltimore, md 21202 phone: 410-332-4700 fax: 410-332-4701 9000-9315-UPPage 1
3D RENDERING VS INSTALL PHOTO 3D RENDERING VS INSTALL PHOTO 3D RENDERING: LOBBY INSTALLATION PHOTO: LOBBY Completed project photography courtesy of the property owner Rendering by SoCal Virtual Tours 3D RENDERING: CLUB ROOM INSTALLATION PHOTO: CLUB ROOM Rendering by SoCal Virtual Tours Photography by Bernard Holnaider
3D RENDERING VS INSTALL PHOTO NOTABLE PHOTOS 3D RENDERING: BAR INSTALLATION PHOTO: BAR Completed project photography courtesy of the property owner Rendering by SoCal Virtual Tours Photography by Bernard Holnaider Next Project
• FF&E Development Specifications Custom Line Drawings - Furniture and Lighting Coordination with Art and 3D Rendering Consultants • ID Construction Drawings • Construction Administration Furniture and Lighting Shop Drawing Approvals Construction Finish Submittal Approvals (Procore) 02 Eleven at Monon Square Project Information Location: Carmel, Indiana Year Completed: In Progress - Expected Completion by Fall/Winter 2026 Luxury Multifamily | 11 Condominiums | Roughly 5,400 SF Amenity Space | Total 5 Floors Amenities: Jump Lobby, Mail & Package Room, Fitness, Study Rooms, Kitchen, Wine and Dine Room, Reading Room, Lounge, Library, Exterior Courtyard Responsibilities Performed: • Schematic Design Presentation Render Textiles onto Furniture Render Plans & Elevations Professional Work Rendering by SoCal Virtual Tours Designed to elevate the resident experience, the amenity spaces combine rich natural materials, sculptural furnishings, and warm neutral tones to create inviting destinations that encourage gathering, relaxation, and connection, while the residential units provide two curated finish palettes - light and dark - giving residents a personalized design experience while preserving a cohesive community aesthetic. Rich natural materials, classic detailing, and contemporary finishes create interiors that are both timeless and welcoming. THE FEEL Firm: RD Jones and Associates Principal: Bernard Holnaider Project Manager: Lauren Christel Role: Interior Designer
DN GARAGE CART RAMP ELEVATOR UP 1403 1304 1302 1304 1403 x3 1305 LINE OF AREA RUG BY OWNER 1306 1502 ART 1604 PLANTERS TENANT LOBBY PACKAGE ROOM STAIR 101 102 C1-1 WOVEN SHADES 1201 1301 MAIL ROOM 102 LINE OF CEILING ABOVE LINE OF CEILING ABOVE 1303 x2 ART 1501 x2 C D E F G SHEET TITLE FF&E LOBB CONTRACTOR. E. THE GENERAL CONTRACTOR SHALL COORDINATE THE INSTALLATION OF ALL DECORATIVE ART AND MIRRORS, ETC. AND PROVIDE ADEQUATE CONCEALD FIRE RETARDANT CONTINUOUS BLOCKING TO SUPPORT A SECURED INSTALLATION. F. THE GENERAL CONTRACTOR SHALL ASSEMBLE & INSTALL ALL DECORATIVE LIGHT FIXTURES (OWNER SUPPLIED AND CONTRACTOR SUPPLIED FIXTURES) FOR A COMPLETE AND PROPER INSTALLATION AS OUTLINED IN THE MANUFACTURERS SPECIFICATIONS. BLOCKING AND/OR STRUCTURAL SUPPORT FOR ALL DECORATIVE LIGHT FIXTURES SHALL BE PROVIDED BY THE GENERAL CONTRACTOR FOR ADEQUATE SUPPORT. WHERE STRUCTURAL SUPPORT IS REQUIRED, GENERAL CONTRACTOR IS RESPONSIBLE FOR PROVIDING SHOP DRAWINGS SIGNED AND SEALED BY A STRUCTURAL PE REGISTERED IN THE LOCAL JURISDICTION. REFER TO LIGHTING SCHEDULE & LIGHTING SPECIFICATIONS FOR ADDITIONAL LIGHTING INFORMATION. G. ALL F.F.&E. SCULPTURES TO BE OWNER SUPPLIED AND CONTRACTOR INSTALLED UNLESS OTHERWISE NOTED. GENERAL CONTRACTOR IS RESPONSIBLE FOR ALL PREP THAT MAY BE REQUIRED IN ORDER TO INSTALL SCULPTURE. INCLUDING BUT NOT LIMITED TO; CUTTING FLOOR FINISHES TO SIZE OF BASE IF SCULPTURE IS DIRECTLY BOLTED TO FLOOR SLAB, CONCRETE SCANNING, PRE DRILLING CONCRETE TO ACCEPT ANCHORS, ETC. 400 E. PRAT TE I-501 SCALE: 1/4" = 1'-0" 1 MAIN LOBBY FF&E PLAN - LEVEL FIRST FLOOR FIRST FLOOR FF&E PLAN MAIL ROOM ELEVATION MAIL ROOM ELEVATION ELEVATOR ELEVATION 3D VIEWS ELEVATIONS LOBBY LOUNGE MAIL ROOM MAIL ROOM ELEVATOR1 2 3 4 1 2 3 4 3D Renderings by SoCal Virtual Tours LOBBY ELEVATION
SECOND FLOOR FF&E PLAN ELEVATIONS FITNESS SAUNA PRIVATE STUDIO KITCHEN GALLERY CORRIDOR LIBRARY READING ROOM WINE AND DINE ROOM MECH STAIR POOL TABLE BILLIARDS 2503 ART 7503 ARTART 2304 x6 2305 2404 X2 2301.1 2302 2308 x2 5402 5401 3401 3305 3402 3304 x2 x2 TV TV MILLWORK MILLWORK COURTYARD ART 2501 ART 3502 6302 TVTV FITNESS EQUIPMENT BY OTHER. REFERENCE FITNESS CONSULTANT DRAWINGS FOR INFORMATION. FITNESS EQUIPMENT BY OTHER. REFERENCE FITNESS CONSULTANT DRAWINGS FOR INFORMATION. 4301 TV ART 5501 207A 208 207B 207 C2-2 RESTROOM CLUB ROOM 209 205 SEE I-503 ART 2502 LINE OF CEILING ABOVE LINE OF CEILING ABOVE LINE OF CEILING ABOVE LINE OF CEILING ABOVE LINE OF CEILING ABOVE DRAPERY 2201 3306 2301.2 5306 5305 5304 2303 X2 53025301 X2 5303 3303 3301 2001 2002 DRAPERY 2201 x8 2306 2309 3201 3302 3501 4201 x6 4302 5502 5201 5201 7501 2307 x2 1 2 3 4 5 6 7 8 A B C D E F G H A B C D E F G H SHEET TITLE: SCALE: DATE: DRAWN BY: PROJECT No: SHEET NUMBER: As indicated 3/26/2025 8:15:58 AM Autodesk Docs://Monon Square/231120 3495 Monon Square Condos_RDJA_R22.rvt I−502 RDJA 03.25.2025 3495 FF&E PLAN − 2ND FLOOR AMENITY THE ELEVEN 620 S. Rangeline Road, Carmel, IN 46032 C. PRIOR TO PURCHASING, INSTALLER SHALL BE RESPONSIBLE FOR VERIFYING ALL QUANTITY TAKE OFFS AND SUBMITTING THESE QUANTITIES TO DESIGNER / PURCHASING AGENT. INSTALLER SHALL ALSO BE RESPONSIBLE FOR SUPPLYING, RECEIVING, WAREHOUSING AND INSPECTING ALL FLOOR COVERING AND UNDERLAYMENTS PRIOR TO FABRICATION AND OR INSTALLATION. ANY MANUFACTURING DEFECT SHALL BE REPORTED TO R.D.JONES AND ASSOCIATES AND / OR CLIENT IMMEDIATELY. D. PRIOR TO DELIVERY OF GOODS TO BUILDING, GENERAL CONTRACTOR SHALL BE RESPONSIBLE FOR OBTAINING FROM PURCHASING AGENT ACTUAL CUTTINGS FOR IDENTIFICATIONS PURPOSES OF ALL GOODS AND ITEMS INSTALLED BY THE GENERAL CONTRACTOR. E. THE GENERAL CONTRACTOR SHALL COORDINATE THE INSTALLATION OF ALL DECORATIVE ART AND MIRRORS, ETC. AND PROVIDE ADEQUATE CONCEALD FIRE RETARDANT CONTINUOUS BLOCKING TO SUPPORT A SECURED INSTALLATION. F. THE GENERAL CONTRACTOR SHALL ASSEMBLE & INSTALL ALL DECORATIVE LIGHT FIXTURES (OWNER SUPPLIED AND CONTRACTOR SUPPLIED FIXTURES) FOR A COMPLETE AND PROPER INSTALLATION AS OUTLINED IN THE MANUFACTURERS SPECIFICATIONS. BLOCKING AND/OR STRUCTURAL SUPPORT FOR ALL DECORATIVE LIGHT FIXTURES SHALL BE PROVIDED BY THE GENERAL CONTRACTOR FOR ADEQUATE SUPPORT. WHERE STRUCTURAL SUPPORT IS REQUIRED, GENERAL CONTRACTOR IS RESPONSIBLE FOR PROVIDING SHOP DRAWINGS SIGNED AND SEALED BY A STRUCTURAL PE REGISTERED IN THE LOCAL JURISDICTION. REFER TO LIGHTING SCHEDULE & LIGHTING SPECIFICATIONS FOR ADDITIONAL LIGHTING INFORMATION. G. ALL F.F.&E. SCULPTURES TO BE OWNER SUPPLIED AND CONTRACTOR INSTALLED UNLESS OTHERWISE NOTED. GENERAL CONTRACTOR IS RESPONSIBLE FOR ALL PREP THAT MAY BE REQUIRED IN ORDER TO INSTALL SCULPTURE. INCLUDING BUT NOT LIMITED TO; CUTTING FLOOR FINISHES TO SIZE OF BASE IF SCULPTURE IS DIRECTLY BOLTED TO FLOOR SLAB, CONCRETE SCANNING, PRE DRILLING CONCRETE TO ACCEPT ANCHORS, ETC. 400 E. PRATT STREET, STE 902, BALTIMORE, MD 21202 TEL: 410.332.4700 FAX: 410.332.4701 WWW.RDJONES.COM I-502 SCALE: 1/4" = 1'-0" 1 AMENITY FF&E PLAN - LEVEL SECOND FLOOR SCALE: NTSI-502 2 KEY PLAN AMENITY - LEVEL SECOND FLOOR REVISION / ISSUE SCHEDULE No. DESCRIPTION DATE 2 50% CD SET 03.22.2024 3 PERMIT SET 06.10.2024 4 IFC SET 03.25.2025 GALLERY CORRIDOR WINE AND DINE CLUB ROOM KITCHEN CLUB ROOM1 2 3 4 GALLERY CORRIDOR ELEVATION WINE AND DINE ELEVATION CLUB ROOM KITCHEN ELEVATION CLUB ROOM ELEVATION 1 2 3 4 3D Renderings by SoCal Virtual Tours 3D VIEWS
GALLERY CORRIDOR/LIBRARY MILLWORK DRAWINGS CL CL MTL-02 DECORATIVE METAL SCREEN 8" 1'-7 1/4" / EQ 2" 1'-7 1/4" / EQ 2" 1'-7 1/4" / EQ 2" 1'-7 1/4" / EQ 2" 1'-7 1/4" / EQ 8" I-906.1 1 TYPE A 3'-5 5/8" 7'-10 5/8" 11'-3" 1"6"1"2'-1"1"6"1 5/8" 1" 6" 1" 8'-8" 1" 6" 1" 1" 6" 1" 4'-7 1/2" 1" 6" 1" 4'-7 1/2" 1" 6" 1" 1" 6" 1" 8'-8" 1" 6" 1" 5 I-906.2 5 I-906.2 5 I-906.2 LINE OF TYPE C3 UPLIGHTS WD-02 WOOD VENEER ON MDF BACKING, TYP. WD-02 2" x 3/4" THK SOLID WOOD SHELF EDGE. PROVIDE MITERED CORNERS AND EASED EDGES. TYP. WD-02 WD-02 1" x 1/2" THK SOLID WOOD TRIM. PROVIDE MITERED CORNERS AND EASED EDGES. TYP. WD-02 1" x 1/2" THK SOLID WOOD TRIM. PROVIDE MITERED CORNERS AND EASED EDGES. TYP. WD-02 WOOD VENEER ON MDF BACKING, TYP. WD-02 2" x 3/4" THK SOLID WOOD SHELF EDGE. PROVIDE MITERED CORNERS AND EASED EDGES. TYP. WD-02 WD-02 SOLID WOOD TRIM WD-02 SOLID WOOD TRIM B.O.C. + 8' - 0" B.O.C. + 10' - 6" F.F. + 0' - 0" PROVIDE FULLY REMOVABLE PANEL TO ACCESS JUNCTION BOX AS SHOWN ON ELECTRICAL PLANS. 1"6"1"8'-8"1"6"1" 3'-5 1/2" / TYPE A7'-10 3/4"3'-5" / TYPE A 1"6"1"2'-1"1"6"1" 1" 6" 1" 2'-1" 1" 6" 1" 5 I-906.2 WD-02 1" x 1/2" THK SOLID WOOD TRIM. PROVIDE MITERED CORNERS AND EASED EDGES. TYP. WD-02 WOOD VENEER ON MDF BACKING, TYP. WD-02 2" x 3/4" THK SOLID WOOD SHELF EDGE. PROVIDE MITERED CORNERS AND EASED EDGES. TYP. WD-02 WD-02 SOLID WOOD TOE KICK SOLID WOOD TRIM 5 I-906.2 WD-02 1" x 1/2" THK SOLID WOOD TRIM. PROVIDE MITERED CORNERS AND EASED EDGES. TYP. WD-02 WOOD VENEER ON MDF BACKING, TYP. WD-02 2" x 3/4" THK SOLID WOOD SHELF EDGE. PROVIDE MITERED CORNERS AND EASED EDGES. TYP. WD-02 WD-02 SOLID WOOD TOE KICKSOLID WOOD TRIM I-906.1 2A PROVIDE FULLY REMOVABLE PANEL TO ACCESS JUNCTION BOX AS SHOWN ON ELECTRICAL PLANS. PROVIDE CONCEALED PANEL MOUNTING CLIPS; STAR HANGER 326 ZERO SIDE MOUNT (OR EQ.) FOR REMOVABLE PANEL.PROVIDE FULLY REMOVABLE PANEL TO ACCESS JUNCTION BOX AS SHOWN ON ELECTRICAL PLANS. 1" 6" 1" 1/2" 8" WD-02 WOOD VENEER ON 1/2" MDF BACKING, TYP. PROVIDE PLYWD BACKING AS NEEDED. PROVIDE MITERED CORNER, TYP. WD-02 1" x 1/2" THK SOLID WOOD TRIM. PROVIDE MITERED CORNERS AND EASED EDGES. TYP. WD-02 WOOD VENEER ON 3/4" MDF BACKING, TYP. WOOD TRIM WD-02 1" 6" 1" 8" 1/2" LINE OF SHELF BEYOND LINE OF SHELF BEYOND NOTE: DESIGN INTENT FOR NO SEAM TO BE VISIBLE BETWEEN OUTER SOLID WOOD TRIM AND INNER RECESS VENEER. WD-02 WOOD VENEER ON 3/4" MDF BACKING I-906 3 I-906 2 22'-6 3/4" MTL-02 DECORATIVE METAL SCREEN 3'-5" / TYPE A (OPP.)7'-10 3/4"3'-5" / TYPE A EQ EQ 2'-4 1/2" 14'-9 1/4" 11'-3" / TYPE B3'-5" / TYPE A J-BOX FOR SHELF LIGHT. REFER TO LIGHTING CONSULTANT'S DRAWINGS FOR SPEC'S & ID DETAILS FOR LOCATION OF SHELF LIGHT. RUN WIRING TO LIGHT FIXTURES THROUGH WALL OR MILLWORK. SHOULD NOT BE VISIBLE. 8"2'-1"8" 1'-0" 4 7/8" 1/2" 3/4" 3/4" 9 1/4" 3/4" 1/2"11 1/2" 1"6"1" 1"6"1" WD-02 WOOD VENEER ON MDF BACKING, TYP. SOLID WOOD TRIM WD-02 8"4'-7 1/2"8"4'-7 1/2"8" WD-02 WOOD VENEER ON MDF BACKING, TYP. WD-02 WD-02 I-906 6 I-906 6 I-906 8 3"7'-4 1/2"3" I-906 6 I-906 6 I-906 8I-906 8 I-906 8 I-906 7 I-906.1 4 3" 7 I-906.1 I-906.1 5 I-906.1 5 OPP. OPP. OPP. J-BOX FOR SHELF LIGHT. REFER TO LIGHTING CONSULTANT'S DRAWINGS FOR SPEC'S & ID DETAILS FOR LOCATION OF SHELF LIGHT. RUN WIRING TO LIGHT FIXTURES THROUGH WALL OR MILLWORK. SHOULD NOT BE VISIBLE. OPP. OPP. J-BOX FOR SHELF LIGHT. REFER TO LIGHTING CONSULTANT'S DRAWINGS FOR SPEC'S & ID DETAILS FOR LOCATION OF SHELF LIGHT. RUN WIRING TO LIGHT FIXTURES THROUGH WALL OR MILLWORK. SHOULD NOT BE VISIBLE. CONTINUOUS RECESSED STRIP LIGHT FIXTURE, TYP. 1" 6" 1" WD-02 WOOD VENEER ON 1/2" MDF BACKING, TYP. PROVIDE PLYWD BACKING AS NEEDED. PROVIDE MITERED CORNER, TYP. WD-02 1" x 1/2" THK SOLID WOOD TRIM. PROVIDE MITERED CORNERS AND EASED EDGES. TYP. LINE OF GYP. BD. WD-02 WOOD VENEER ON 3/4" MDF SUBSTRATE ALL DESIGNS, SKETCHES, DRAWINGS, SPECIFICATIONS, MODELS AND SAMPLES ARE THE EXCLUSIVE PROPERTY OF R.D. JONES & ASSOCIATES, INC., WHETHER THE JOB FOR WHICH THEY ARE MADE IS EXCUTED OR NOT UNAUTHORIZED USE OF THESE DESIGNS ETC. FOR ANY OTHER PURPOSE IS PROHIBITED. CONTRACTOR IS RESPONSIBLE FOR VERIFYING ALL DIMENSIONS AND CONDITIONS ON THE JOB. INCLUDING BUILDING, ELEVATOR AND CORRIDOR CLEARANCES WHERE JOB CONDITIONS PREVENT OBTAINING DIMENSIONS, OR RESULTS AS SHOWN OR SPECIFIED, CHECK WITH R. D. JONES & ASSOCIATES, INC. BEFORE PROCEEDING WITH THE WORK. 1 2 3 4 5 6 7 8 A B C D E F G H A B C D E F G H SHEET TITLE: SCALE: DATE: DRAWN BY: PROJECT No: SHEET NUMBER: 1 2 3 4 5 6 7 8 As indicated 3/26/2025 8:18:44 AM Autodesk Docs://Monon Square/231120 3495 Monon Square Condos_RDJA_R22.rvt I−906 Author 03.25.2025 3495 DETAILS − GALLERY CORR. / LIBRARY − BOOKCASE AND SCREEN THE ELEVEN 620 S. Rangeline Road, Carmel, IN 46032 400 E. PRATT STREET, STE 902, BALTIMORE, MD 21202 TEL: 410.332.4700 FAX: 410.332.4701 WWW.RDJONES.COM I-906 SCALE: 3/4" = 1'-0" 2 GALLERY CORRIDOR - BOOKCASE AND SCREEN DETAIL SCALE: NTSI-906 4 GALLERY CORRIDOR - BOOKCASE AND SCREEN DETAIL ISOMETRIC REVISION / ISSUE SCHEDULE No.
3D Rendering Coordination • ID Construction Drawings - Public Areas • Construction Administration Furniture and Lighting Shop Drawing Approvals 03 DoubleTree Suites by Hilton Project Information Location: Austin, TX Year Completed: 2025 Hotel Renovation | 188 Guestrooms & Public Area | 15 Total Renovated Floors Responsibilities Performed: • Site Analysis and Documentation • FF&E Design Development Specifications Professional Work Inspired by Austin’s rich history of stately architecture, this hotel blends the “rustic” with the “refined,” pairing heavily carved pecan woodwork with modern elements and quirky details. Bold colors, sculptural lighting, nailhead accents, tufted leather furnishings, and buckle detailing create a dramatic yet sophisticated design that celebrates the city’s eclectic personality. THE FEEL Firm: Studio Partnership Principal: Karin Harrington Project Manager: Leanne White Role: Junior Designer Public Area: Lobby & Lounge, Bar & Lounge, Restaurant, Pre-Function, Meeting Rooms, Restrooms, Pool Rendering by Lifang
Austin’s design identity is rooted in a tension between tradition and reinvention. Familiar Texas influences are reinterpreted through a playful mix of nostalgia, kitsch, and contemporary expression, creating spaces that feel both authentic to the city and distinctly current. 3D VIEW ELEVATIONS Rendering by Lifang
3D VIEW Rendering by Lifang Through a layered palette of rich wood tones, soft neutrals, muted blues, and warm metallic accents, the renovated guestroom creates a refined, yet approachable residential feel. Textured fabrics, natural materials, and organic patterns add depth and visual interest.
Jordin Keyser Interior Designer jordinkeyser@gmail.com (443) 613-2108Reference: Lauren Christel | (443) 286-5456