View UD28917B D Baseline DS TMG52X Series Barrier Gate User Manual V1.0.0 20260205 flipbook.
Barrier Gate User Manual
Barrier Gate User Manual i About this Document ● This Document includes instructions for using and managing the Product. Pictures, charts, images and all other information hereinafter are for description and explanation only. ● The information contained in the Document is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version of the Document at the Hikvision website (https://www.hikvision.com). Unless otherwise agreed, Hangzhou Hikvision Digital Technology Co., Ltd. or its affiliates (hereinafter referred to as "Hikvision") makes no warranties, express or implied. ● Please use the Document with the guidance and assistance of professionals trained in supporting the Product. About this Product ● This product can only enjoy the after-sales service support in the country or region where the purchase is made. ● If the product you choose is a video product, please scan the following QR code to obtain the "Initiatives on the Use of Video Products", and read it carefully. Acknowledgment of Intellectual Property Rights ● Hikvision owns the copyrights and/or patents related to the technology embodied in the Products described in this Document, which may include licenses obtained from third parties. ● Any part of the Document, including text, pictures, graphics, etc., belongs to Hikvision. No part of this Document may be excerpted, copied, translated, or modified in whole or in part by any means without written permission. ● and other Hikvision’s trademarks and logos are the properties of Hikvision in various jurisdictions. ● Other trademarks and logos mentioned are the properties of their respective owners. LEGAL DISCLAIMER ● TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS DOCUMENT AND THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, ARE PROVIDED "AS IS" AND "WITH ALL FAULTS AND ERRORS". HIKVISION MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA, CORRUPTION OF SYSTEMS, OR LOSS OF DOCUMENTATION, WHETHER BASED ON BREACH OF CONTRACT, TORT (INCLUDING
Barrier Gate User Manual ii NEGLIGENCE), PRODUCT LIABILITY, OR OTHERWISE, IN CONNECTION WITH THE USE OF THE PRODUCT, EVEN IF HIKVISION HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR LOSS. ● YOU ACKNOWLEDGE THAT THE NATURE OF THE INTERNET PROVIDES FOR INHERENT SECURITY RISKS, AND HIKVISION SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER-ATTACK, HACKER ATTACK, VIRUS INFECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, HIKVISION WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. ● YOU AGREE TO USE THIS PRODUCT IN COMPLIANCE WITH ALL APPLICABLE LAWS, AND YOU ARE SOLELY RESPONSIBLE FOR ENSURING THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. ESPECIALLY, YOU ARE RESPONSIBLE, FOR USING THIS PRODUCT IN A MANNER THAT DOES NOT INFRINGE ON THE RIGHTS OF THIRD PARTIES, INCLUDING WITHOUT LIMITATION, RIGHTS OF PUBLICITY, INTELLECTUAL PROPERTY RIGHTS, OR DATA PROTECTION AND OTHER PRIVACY RIGHTS. YOU SHALL NOT USE THIS PRODUCT FOR ANY PROHIBITED END-USES, INCLUDING THE DEVELOPMENT OR PRODUCTION OF WEAPONS OF MASS DESTRUCTION, THE DEVELOPMENT OR PRODUCTION OF CHEMICAL OR BIOLOGICAL WEAPONS, ANY ACTIVITIES IN THE CONTEXT RELATED TO ANY NUCLEAR EXPLOSIVE OR UNSAFE NUCLEAR FUEL-CYCLE, OR IN SUPPORT OF HUMAN RIGHTS ABUSES. ● IN THE EVENT OF ANY CONFLICTS BETWEEN THIS DOCUMENT AND THE APPLICABLE LAW, THE LATTER PREVAILS. © Hangzhou Hikvision Digital Technology Co., Ltd. All rights reserved.
Barrier Gate User Manual iii Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Danger Indicates a hazardous situation which, if not avoided, will or could result in death or serious injury. Caution Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. Note Provides additional information to emphasize or supplement important points of the main text.
Barrier Gate User Manual iv Contents Chapter 1 Introduction ............................................................................................................... 1 1.1 Product Introduction ........................................................................................................... 1 1.2 Packing List ........................................................................................................................... 1 1.3 Barrier Gate Overview ......................................................................................................... 2 1.4 Barrier Gate Structure.......................................................................................................... 3 1.5 Boom Pole Overview ........................................................................................................... 5 1.5.1 Octagonal Straight Boom Pole .................................................................................. 5 1.5.2 Boom Pole with Strip Light ....................................................................................... 6 1.5.3 Anti-collision Cylinder Boom Pole ............................................................................ 7 1.5.4 Octagonal Telescopic Boom Pole.............................................................................. 8 1.5.5 Fence Boom Pole ....................................................................................................... 8 1.5.6 Folding Boom Pole .................................................................................................... 9 Chapter 2 Installation ............................................................................................................... 10 2.1 Installation Environment ................................................................................................... 10 2.2 Install Barrier Gate Host .................................................................................................... 10 2.3 Install Boom Pole ............................................................................................................... 12 2.3.1 Install Octagonal Straight Boom Pole ..................................................................... 12 2.3.2 Install Boom Pole with Strip Light .......................................................................... 14 2.3.3 Install Anti-collision Cylinder Boom Pole ............................................................... 16 2.3.4 Install Octagonal Telescopic Boom Pole ................................................................. 18 2.3.5 Install Fence Boom Pole ......................................................................................... 21 2.3.6 Install Folding Boom Pole ...................................................................................... 24 2.4 Wiring ................................................................................................................................. 30 2.4.1 Connect to Power Supply........................................................................................ 30 2.4.2 Connect to Access ANPR Camera ........................................................................... 31 2.4.3 Connect to Traffic Signal Light ................................................................................ 32 2.4.4 Connect to Anti-fall Radar ...................................................................................... 33 2.4.5 Connect to Vehicle Detector ................................................................................... 36 2.4.6 Connect to Active Infrared Intrusion Detector....................................................... 38
Barrier Gate User Manual v 2.4.7 Connect to Arrow Indicator .................................................................................... 39 2.4.8 Connect to Strip Light ............................................................................................. 40 2.4.9 Connect to Warning Light ....................................................................................... 40 Chapter 3 Parameters Configuration ......................................................................................... 42 3.1 Remote Control .................................................................................................................. 42 3.2 Set Parameters via Control Board Buttons ..................................................................... 42 3.2.1 Button Description .................................................................................................. 42 3.2.2 Operation Procedure ............................................................................................. 43 Chapter 4 Maintenance ............................................................................................................ 57 4.1 Adjust Boom Pole Balance ................................................................................................. 57 4.2 Change Boom Pole ............................................................................................................. 57 4.3 Change Spindle Rod and Spring ......................................................................................... 58 4.3.1 Spring and Spindle Rod Specifications ................................................................... 58 4.3.2 Change Spindle Rod ................................................................................................ 59 4.3.3 Change Spring ......................................................................................................... 61 4.4 Change Machine Core ........................................................................................................ 64 4.5 Left/Right Direction of Boom Pole .................................................................................... 65 4.6 Change Left/Right Direction of Machine Core .................................................................. 67 A. FAQ ................................................................................................................................... 69 B. Peripheral Device Interfaces Introduction ......................................................................... 71
Barrier Gate User Manual 1 Chapter 1 Introduction 1.1 Product Introduction Barrier gate (hereinafter referred to as “device”) is the entrance and exit management device to limit motor vehicle passing. It can control the boom pole automatically via parking lot management system. Or you can control the boom pole via buttons on remote controller. Barrier gate is widely applicable to toll station, parking lot, the entrance and exit of community and unit, etc. 1.2 Packing List Please check if there is any damage of the package first. Refer to the table below for the packing list of the barrier gate. According to the packing list, make sure no item is lost. After checking all the items are included, you can continue to install the device. Table 1-1 Packing List No. Diagram Name Quantity 1 Barrier gate host 1 2 Remote controller 2
Barrier Gate User Manual 2 No. Diagram Name Quantity 3 Chuck 1 4 Spindle rod screw set 4 5 Layer 2 6 Expansion screw 4 7 L-type wrench 1 8 Key 1 1.3 Barrier Gate Overview Note The appearances of the devices vary with different models. The figure below just takes an example. Refer to the actual device for details.
Barrier Gate User Manual 3 Figure 1-1 Barrier Gate Overview 1.4 Barrier Gate Structure Figure 1-2 Barrier Gate Structure
Barrier Gate User Manual 4 Table 1-2 Barrier Gate Structure No. Description No. Description 1 Boom pole fixing screw 9 Boom pole 2 Chuck 10 Spindle rod 3 Top cover 11 Aluminum Resistance 4 Antenna 12 Control box 5 Host 13 Transformer 6 Air switch 14 Machine core 7 Strip 15 Spring 8 Front cover Figure 1-3 Machine Core Structure Table 1-3 Machine Core Structure No. Description No. Description 1 Spring shaft 5 Screw weld nut 2 Spring hook 6 Bottom lock nut
Barrier Gate User Manual 5 No. Description No. Description 3 Spring 7 Cotter pin 4 Spring lower screw 1.5 Boom Pole Overview 1.5.1 Octagonal Straight Boom Pole Figure 1-4 Octagonal Straight Boom Pole Table 1-4 Octagonal Straight Boom Pole Packing List Item Quantity Octagonal Straight boom pole 1
Barrier Gate User Manual 6 1.5.2 Boom Pole with Strip Light Figure 1-5 Boom Pole with Strip Light Table 1-5 Boom Pole with Strip Light Packing List Item Quantity Boom pole with strip light 1 Cushion block 2
Barrier Gate User Manual 7 1.5.3 Anti-collision Cylinder Boom Pole Figure 1-6 Anti-collision Cylinder Boom Pole Table 1-6 Anti-collision Cylinder Boom Pole Packing List Item Quantity Anti-collision cylinder boom pole 1 M8 cap nut 1 M8 × 75 hex socket head cap screw 1
Barrier Gate User Manual 8 1.5.4 Octagonal Telescopic Boom Pole Figure 1-7 Octagonal Telescopic Boom Pole Table 1-7 Octagonal Telescopic Boom Pole Packing List Item Quantity Octagonal telescopic boom pole 1 Sub-boom pole anti-fall adhesive tape 1 M4 × 20 pan head hex screw 2 1.5.5 Fence Boom Pole Figure 1-8 Fence Boom Pole
Barrier Gate User Manual 9 Table 1-8 Fence Boom Pole Packing List Item Quantity Fence boom pole 1 Pull rod joint component 1 1.5.6 Folding Boom Pole Figure 1-9 Folding Boom Pole Table 1-9 Folding Boom Pole Packing List Item Quantity Sub-boom pole 1 Main boom pole 1 Pull rod 1 Joint component to connect main boom pole and pull rod 1
Barrier Gate User Manual 10 Chapter 2 Installation 2.1 Installation Environment The installation position of the barrier gate should meet the customer’s requirements and the following requirements. ● The installation space should be large enough to guarantee the boom pole can rise or fall normally. ● Install the barrier gate on horizontal ground. ● Installation surface requirements: ○ If no base is installed, the installation surface must be firm enough to fix the host to guarantee the barrier gate can run stably. ○ If base is needed, it is recommended to install the base with quick setting cement. The base should be horizontal. The height should be no more than 300 mm. The length and width of base should be larger than those of the actual barrier gate installation surface. ● If the barrier gate is anti-collision, the boom pole will flick 90° in reverse direction if it is impacted. Make sure there is no obstacle in the range. ● Bury the cables before installation. The conduit should be 50 mm higher than the ground to avoid the gathered water on the ground to enter into the cable and cause short circuit. 2.2 Install Barrier Gate Host Follow the steps below to fix the host of barrier gate. Steps 1. Mark the positions of holes on the refuge island as shown below. The hole depth is approx. 120 mm. Figure 2-1 Mark Position
Barrier Gate User Manual 11 Note The suggestions for positions of holes: ● The holes in vertical direction should be near to the switch. ● If the entrance/exit is unidirectional, the holes should be in the horizontal center of the refuge island. If the entrance/exit is bi-directional, the holes in the horizontal direction should be far away from the entrance/exit. 2. Punch the four M12 × 150 expansion screws in the package into the marked positions on the refuge island, and fasten the nuts to make the screws expand to grip the ground. Then unfasten the nuts. Figure 2-2 Install Expansion Screws 3. Uninstall the top and front covers. 1) Use the L-type key to unlock the top cover. 2) Lift the top cover gently and push it to take it down. 3) Lift the front cover gently to take it down. Figure 2-3 Uninstall Top and Front Covers 4. Fix the host. 1) Put the layers on the host bottom and keep them perpendicular to the barrier gate’s switch.
Barrier Gate User Manual 12 2) Put the host on the positions of expansion screws on the refuge island to make the screws pass through the layers. Keep the layers perpendicular to the barrier gate’s switch. 3) Fasten the expansion nuts on the screws to fix the host. Figure 2-4 Fix Host Danger Keep the supporting bracket of the boom pole vertically upward to avoid accident caused by accidental rotation. 2.3 Install Boom Pole 2.3.1 Install Octagonal Straight Boom Pole Steps 1. Unscrew the cap nuts, spring washers, and flat washers on the other sides of the four assembling bolts. Save the components and parts for the following installations. Figure 2-5 Unscrew Assembling Bolts 2. Install the chuck to the boom pole with the bolts as shown in the figure below.
Barrier Gate User Manual 13 Figure 2-6 Install Chuck 3. Install the boom pole to the spindle rod and fasten the other ends of the bolts with the disassembled spring washers, flat washers, and cap nuts. Figure 2-7 Fix Octagonal Straight Boom Pole
Barrier Gate User Manual 14 2.3.2 Install Boom Pole with Strip Light Steps 1. Unscrew the cap nuts, spring washers, and flat washers on the other sides of the four assembling bolts. Save the components and parts for the following installations. Figure 2-8 Unscrew Assembling Bolts 4. Install the chuck and two cushion blocks to the boom pole with the bolts as shown in the figure below. Figure 2-9 Install Chuck and Cushion Blocks 5. Install the boom pole to the spindle rod and fasten the other ends of the bolts with the disassembled spring washers, flat washers, and cap nuts.
Barrier Gate User Manual 15 Figure 2-10 Fix Boom Pole with Strip Light 6. Remove the rubber plug of the cable hole on the host. Figure 2-11 Remove Rubber Plug 7. Wire the strip light cable. 1) Take the M12 white waterproof joint out from the accessory package. 2) Fix the waterproof joint to the cable hole on the host with the fixing nut. 3) Remove the waterproof cover from the joint, and thread the strip light cable through the
Barrier Gate User Manual 16 waterproof cover, waterproof joint, and fixing nut. 4) Pull the strip light cable in the internal host until the white rolling strip limit block on the strip light cable nears to the waterproof cover. 5) Power off the device. Rotate the boom pole to check if the strip light cable length is appropriate. Fasten the waterproof cover to the joint after the length is appropriate. Figure 2-12 Wire Strip Light Cable 2.3.3 Install Anti-collision Cylinder Boom Pole Steps 1. Stuff the boom pole in the spindle rod aslant as shown in the figure below. Align the installation hole on the boom pole with that on the spindle rod.
Barrier Gate User Manual 17 Figure 2-13 Stuff Boom Pole Aslant 2. Insert the M8 × 75 hex socket head cap screw into the installation hole, and push the boom pole into the spindle rod quickly according to the directions as shown in the figure below. Figure 2-14 Install Anti-collision Cylinder Boom Pole 3. Fix the M8 cap nut to the screw to fix the boom pole.
Barrier Gate User Manual 18 Figure 2-15 Fix Boom Pole 2.3.4 Install Octagonal Telescopic Boom Pole Steps 1. Install the octagonal telescopic boom pole. 1) Pull the sub-boom pole out according to the direction shown in the figure below. Align the installation holes on the main boom pole and sub-boom pole. Figure 2-16 Pull Sub-Boom Pole 2) Fix two M4 × 20 pan head hex screws into the installation holes.
Barrier Gate User Manual 19 Figure 2-17 Fix Screws 3) Remove the end cover of the sub-boom pole. Insert the anti-fall adhesive tape into the sub-boom pole. After the anti-fall adhesive tape is inserted to the limit position, cut the projecting adhesive tape. Figure 2-18 Insert Anti-Fall Adhesive Tape 4) Install the end cover to the sub-boom pole. Figure 2-19 Install End Cover 2. Install the octagonal telescopic boom pole to the host. 1) Unscrew the cap nuts, spring washers, and flat washers on the other sides of the four assembling bolts. Save the components and parts for the following installations. Figure 2-20 Unscrew Assembling Bolts
Barrier Gate User Manual 20 2) Install the chuck to the boom pole with the bolts as shown in the figure below. Figure 2-21 Install Chuck 3) Install the boom pole to the spindle rod and fasten the other ends of the bolts with the disassembled spring washers, flat washers, and cap nuts. Figure 2-22 Fix Octagonal Telescopic Boom Pole
Barrier Gate User Manual 21 2.3.5 Install Fence Boom Pole Installation Procedure Steps 1. Install the pull rod joint component to the installation position of the host. Unfasten the joint component pull rod. Figure 2-23 Install Pull Rod Joint Component 2. Install the fence boom pole. 1) Unscrew the cap nuts, spring washers, and flat washers on the other sides of the four assembling bolts. Save the components and parts for the following installations. Figure 2-24 Unscrew Assembling Bolts 2) Install the chuck to the boom pole with the bolts as shown in the figure below.
Barrier Gate User Manual 22 Figure 2-25 Install Chuck 3) Install the boom pole to the spindle rod and fasten the other ends of the bolts with the disassembled spring washers, flat washers, and cap nuts.
Barrier Gate User Manual 23 Figure 2-26 Fix Fence Boom Pole to Spindle Rod 4) Power off the device. Pull the fence boom pole to the horizontal position. Connect the pull rod of the joint component to the joint 2 of the fence boom pole pull rod. Wrest the pull rod of the joint component until the center boom poles are in the vertical position. Fasten the fixing nuts of the joint 1 of the joint component pull rod and joint 2 of the fence boom pole pull rod respectively. 5) Adjust the buffer rod height adjustment holes on the fence boom pole until the end of the buffer rod is on the same horizontal surface with that of the refuge island.
Barrier Gate User Manual 24 Figure 2-27 Adjust Fence Boom Pole Note For the refuge island with a special height, drill holes by yourself to adjust the buffer rod height. Left and Right Directions of Fence Boom Pole When you look from the arrow direction as shown below, the right fence boom pole is the one that the center boom poles are on the left of the main boom pole, and the left fence boom pole is the one that the center boom poles are on the right of the main boom pole. Figure 2-28 Left and Right Directions of Fence Boom Pole 2.3.6 Install Folding Boom Pole Steps 1. Compose the main boom pole and sub-boom pole. 1) Unfasten the cap nuts on the main boom pole and remove the screw and gaskets. Save the
Barrier Gate User Manual 25 components and parts for the following installations. Figure 2-29 Unfasten Accessories of Main Boom Pole 2) Unfasten the cap nuts on the sub-boom pole and remove the screw, gaskets, and sub- boom pole pull rod joint. Save the components and parts for the following installations. Figure 2-30 Unfasten Accessories of Sub- Boom Pole 3) Force apart the sub-boom pole joint boards, and install the main boom pole. Make sure that the installation holes on the joint boards of the sub-boom pole can clip into the black bushing on the main boom pole. Figure 2-31 Connect Main Boom Pole and Sub-Boom Pole 4) Put the sub-boom pole pull rod joint between the joint boards, and insert the screw through the pull rod joint and gaskets, and fasten the cap nuts. Insert the other screw through the other installation holes on the sub-boom pole joint boards and gaskets, and fasten the cap nuts. Make sure that the black bushing on the sub-boom pole pull rod joint
Barrier Gate User Manual 26 can clip into installation holes on the sub-boom pole joint boards. Figure 2-32 Install Sub-Boom Pole Pull Rod Joint 2. Install the folding boom pole to the host. Note Here we take example of the right direction barrier gate. 1) Remove the plastic nut on the installation position of the right direction main boom pole pull
Barrier Gate User Manual 27 rod joint. Figure 2-33 Remove Plastic Nut 2) Install the right direction main boom pole pull rod joint to the installation holes with the flat washer and spring washer. Figure 2-34 Install Main Boom Pole Pull Rod Joint 3) Unscrew the cap nuts, spring washers, and flat washers on the other sides of the four assembling bolts. Save the components and parts for the following installations.
Barrier Gate User Manual 28 Figure 2-35 Unscrew Assembling Bolts 4) Install the chuck to the boom pole with the bolts as shown in the figure below. Figure 2-36 Install Chuck 5) Install the boom pole to the spindle rod and fasten the other ends of the bolts with the disassembled spring washers, flat washers, and cap nuts.
Barrier Gate User Manual 29 Figure 2-37 Fix Folding Boom Pole 6) Power off the device. Pull the main boom pole to the horizontal position, and place the sub- boom pole nearly to the horizontal position. Wrest the pull rod between the sub-boom pole pull rod joint and the main boom pole pull rod joint. Wrest the pull rod continuously to keep the main boom pole and sub-boom pole in the horizontal position, and fasten the nuts on
Barrier Gate User Manual 30 both ends. Figure 2-38 Connect Boom Pole to Host via Pull Rod 2.4 Wiring 2.4.1 Connect to Power Supply Connect the laid power cord (RVV3 × 1.5 mm2 or above) to the power input of barrier gate. Install the top and front covers. Use the L-type key to lock the top cover. Danger ● Cut off the power before wiring. ● The power voltage of barrier gate is 220 VAC ± 10%. If the voltage exceeds the range, voltage stabilizer is needed. ● Make sure the barrier gate is connected to the ground firmly, or it may cause electric shock.
Barrier Gate User Manual 31 Figure 2-39 Connect to Power Supply 2.4.2 Connect to Access ANPR Camera As the figure shown below, connect the rising control + and rising control – interfaces of the barrier gate to the rising control interfaces of the access ANPR camera, and connect the falling control + and falling control – interfaces of the barrier gate to the falling control interfaces of the access ANPR camera.
Barrier Gate User Manual 32Barrier Gate Control Box Access ANPR camera Rising Control Falling Control 1A 1B 2A 2B AC34VNixie Tube Motor Connection Resistance ConnectionEncoder Network Interface Green Light Red Light COM Rise Stop Fall Learn Rising Control + Rising Control - Falling Control + Falling Control - Stopping Control + Stopping Control - +5V/GND Rise via Hand Shank Fall via Hand Shank Stop via Hand Shank GND RS-485-B2 RS-485-A2 5V GND RS-485-B RS-485-A Induction Input + Induction Input - Protection Input + Protection Input - GND +12V Bollard Control 2+ Bollard Control 2 - Bollard Control 1 - Falling Limit Output 1+ Falling Limit Output 1 - Rising Limit Output 1+ Rising Limit Output 1 - Alarm Input 1 + Alarm Input 1 - Alarm Input 2 + Alarm Input 2 - 12V_IN LED_ARR1 LED_ARR2 GND 12V_OUT Bollard Control1 + Figure 2-40 Connect to Access ANPR Camera 2.4.3 Connect to Traffic Signal Light Connect the black line of the traffic signal light to the rising limit output 1- interface of the barrier gate, and connect the grey line of the traffic signal light to the rising limit output 1+ interface of the barrier gate. When the barrier gate is fallen, or is being raised or fallen, the red light is on and vehicles are prohibited.Barrier Gate Control Board AC34VNixie Tube Motor Connection Resistance ConnectionEncoder Network Interface Rise Stop Fall Learn Green Light Red Light COM Rising Control + Rising Control - Falling Control + Falling Control - Stopping Control + Stopping Control - Rising Control + Rising Control - Falling Control + Falling Control - GND RS-485-B2 RS-485-A2 5V GND RS-485-B2 RS-485-A2 Induction Input + Induction Input - Protection Input + Protection Input - GND +12V Bollard Control1 + Bollard Control1 - Bollard Control2 + Bollard Control2 - Falling Limit Output 1+ Falling Limit Output 1- Rising Limit Output 1+ Rising Limit Output 1- Alarm Input 1 + Alarm Input 1 - Alarm Input 2 + Alarm Input 2 - 12V_IN LED_ARR1 LED_ARR2 GND 12V_OUT Black Grey 220 VAC Figure 2-41 Connect to Traffic Signal Light
Barrier Gate User Manual 33 2.4.4 Connect to Anti-fall Radar Anti-fall Radar Wiring The anti-fall radar needs to be powered by 12 VDC power supply. Connect the induction+ and induction- interface of the barrier gate to the radar yellow line and brown line.Radar Brown Line Radar Yellow Line Anti-fall Radar AC34VNixie Tube Motor Connection Resistance ConnectionEncoder Network Interface Green Light Red Light COM Barrier Gate Control BoxRise Stop Fall Learn Rising Control + Rising Control - Falling Control + Falling Control - Stopping Control + Stopping Control - +5V/GND Rise via Hand Shank Fall via Hand Shank Stop via Hand Shank GND RS-485-B2 RS-485-A2 5V GND RS-485-B RS-485-A Induction Input + Induction Input - Protection Input + Protection Input - GND +12V Bollard Control 2+ Bollard Control 2 - Bollard Control 1 - Falling Limit Output 1+ Falling Limit Output 1 - Rising Limit Output 1+ Rising Limit Output 1 - Alarm Input 1 + Alarm Input 1 - Alarm Input 2 + Alarm Input 2 - 12V_IN LED_ARR1 LED_ARR2 GND 12V_OUT Bollard Control1 + Figure 2-42 Connect to Anti-fall Radar Note ● Radar 12 V power supply output: 0.5 AAV, max. 1 A. ● Induction/protection input withstanding voltage: max. 12 VDC. ● 12 V refers to internal power supply of the device. External power supply is not supported. Radar Installation Instructions The anti-fall radar should be installed beside the barrier gate. In different scenarios, follow the instructions below to get the best effect. Scenario 1: Small-Sized Vehicles For small-sized vehicles, such as the cars and SUVs, install the radar according to the figure shown below.
Barrier Gate User Manual 34 Figure 2-43 Small-Sized Vehicles Scenario Scenario 2: Large-Sized Vehicles For large-sized vehicles, such as the oil tank trucks, transport vehicles, trucks, and other vehicles with chassises of higher than 1 m, install the radar according to the figure shown below.
Barrier Gate User Manual 35 Figure 2-44 Large-Sized Vehicles Scenario Scenario 3: Mixed Traffic For mixed traffic scenario, such as the large-sized and small-sized vehicles are mixing, install the radar according to the figure shown below.
Barrier Gate User Manual 36 Figure 2-45 Mixed Traffic Scenario 2.4.5 Connect to Vehicle Detector Vehicle Detector Wiring Connect the Induction input + and Induction input - interfaces of the barrier gate to the vehicle detector.
Barrier Gate User Manual 37Barrier Gate Control Box Loop Vehicle Detector RELAY1_1 RELAY1_2 LOOP1_A LOOP1_B Rise Stop Fall Learn AC34VNixie Tube Motor Connection Resistance ConnectionEncoder Network Interface Green Light Red Light COM Rising Control + Rising Control - Falling Control + Falling Control - Stopping Control + Stopping Control - +5V/GND Rise via Hand Shank Fall via Hand Shank Stop via Hand Shank GND RS-485-B2 RS-485-A2 5V GND RS-485-B RS-485-A Induction Input + Induction Input - Protection Input + Protection Input - GND +12V Bollard Control 2+ Bollard Control 2 - Bollard Control 1 - Falling Limit Output 1+ Falling Limit Output 1 - Rising Limit Output 1+ Rising Limit Output 1 - Alarm Input 1 + Alarm Input 1 - Alarm Input 2 + Alarm Input 2 - 12V_IN LED_ARR1 LED_ARR2 GND 12V_OUT Bollard Control1 + Figure 2-46 Connect to Vehicle Detector Vehicle Detector Installation Instructions The general width of the vehicle detector is 1 m. If there are large-sized vehicles passing in the scenario, widen the width to 1.5 m. The anti-fall vehicle detector should be installed behind the barrier gate to avoid that the boom pole falls down and smashes the vehicle after the vehicle passes the vehicle detector and the signal disappears.
Barrier Gate User Manual 38 Figure 2-47 Vehicle Detector Installation 2.4.6 Connect to Active Infrared Intrusion Detector Connect the induction input - interface of the barrier gate to the COM interface of the active infrared intrusion detector, and the induction input + interface of the barrier gate to the OUT interface of the active infrared intrusion detector.
Barrier Gate User Manual 39COM OUT AC34VNixie Tube Motor Connection Resistance ConnectionEncoder Network Interface Green Light Red Light COM Barrier Gate Control BoxRise Stop Fall Learn Rising Control + Rising Control - Falling Control + Falling Control - Stopping Control + Stopping Control - +5V/GND Rise via Hand Shank Fall via Hand Shank Stop via Hand Shank GND RS-485-B2 RS-485-A2 5V GND RS-485-B RS-485-A Induction Input + Induction Input - Protection Input + Protection Input - GND +12V Bollard Control 2+ Bollard Control 2 - Bollard Control 1 - Falling Limit Output 1+ Falling Limit Output 1 - Rising Limit Output 1+ Rising Limit Output 1 - Alarm Input 1 + Alarm Input 1 - Alarm Input 2 + Alarm Input 2 - 12V_IN LED_ARR1 LED_ARR2 GND 12V_OUT Bollard Control1 + Figure 2-48 Connect to Active Infrared Intrusion Detector 2.4.7 Connect to Arrow Indicator Connect the arrow indicator to the barrier gate as shown below.AC34VNixie Tube Motor Connection Resistance ConnectionEncoder Network Interface GND Green Light Red Light COM 箭头灯接线 PEL N -V +V V+ Front Barrier Gate Control BoxRise Stop Fall Learn Rising Control + Rising Control - Falling Control + Falling Control - Stopping Control + Stopping Control - +5V/GND Rise via Hand Shank Fall via Hand Shank Stop via Hand Shank GND RS-485-B2 RS-485-A2 5V GND RS-485-B RS-485-A Induction Input + Induction Input - Protection Input + Protection Input - GND +12V Bollard Control 2+ Bollard Control 2 - Bollard Control 1 - Falling Limit Output 1+ Falling Limit Output 1 - Rising Limit Output 1+ Rising Limit Output 1 - Alarm Input 1 + Alarm Input 1 - Alarm Input 2 + Alarm Input 2 - 12V_IN LED_ARR1 LED_ARR2 GND 12V_OUT Bollard Control1 +
Barrier Gate User Manual 40 Figure 2-49 Connect to Arrow Indicator 2.4.8 Connect to Strip Light For the boom pole with strip light, connect the strip light to the barrier gate as shown below.Red Line GND Green PEL N -V +V Yellow V+ AC34VNixie Tube Motor Connection Resistance ConnectionEncoder Network Interface Green Light Red Light COM Barrier Gate Control BoxRise Stop Fall Learn Rising Control + Rising Control - Falling Control + Falling Control - Stopping Control + Stopping Control - +5V/GND Rise via Hand Shank Fall via Hand Shank Stop via Hand Shank GND RS-485-B2 RS-485-A2 5V GND RS-485-B RS-485-A Induction Input + Induction Input - Protection Input + Protection Input - GND +12V Bollard Control 2+ Bollard Control 2 - Bollard Control 1 - Falling Limit Output 1+ Falling Limit Output 1 - Rising Limit Output 1+ Rising Limit Output 1 - Alarm Input 1 + Alarm Input 1 - Alarm Input 2 + Alarm Input 2 - 12V_IN LED_ARR1 LED_ARR2 GND 12V_OUT Bollard Control1 + Figure 2-50 Connect to Strip Light 2.4.9 Connect to Warning Light For the barrier gate with a warning light on the top of host, connect the warning light to the barrier gate as shown below.
Barrier Gate User Manual 41AC34VNixie Tube Motor Connection Resistance ConnectionEncoder Network Interface Green Light Red Light COM Barrier Gate Control BoxRise Stop Fall Learn Rising Control + Rising Control - Falling Control + Falling Control - Stopping Control + Stopping Control - +5V/GND Rise via Hand Shank Fall via Hand Shank Stop via Hand Shank GND RS-485-B2 RS-485-A2 5V GND RS-485-B RS-485-A Induction Input + Induction Input - Protection Input + Protection Input - GND +12V Bollard Control 2+ Bollard Control 2 - Bollard Control 1 - Falling Limit Output 1+ Falling Limit Output 1 - Rising Limit Output 1+ Rising Limit Output 1 - Alarm Input 1 + Alarm Input 1 - Alarm Input 2 + Alarm Input 2 - 12V_IN LED_ARR1 LED_ARR2 GND 12V_OUT Bollard Control1 + DC 24V Power Supply Power Input Figure 2-51 Connect to Warning Light
Barrier Gate User Manual 42 Chapter 3 Parameters Configuration After the installation completes, power on the barrier gate, and it will operate self-check of rising to limit position. After the self-check completes, you can control the barrier gate via remote controller or buttons. 3.1 Remote Control After the self-check completes, you can control the boom pole to rise, fall, and stop via the remote controller leaving factory with the barrier gate. 3.2 Set Parameters via Control Board Buttons 3.2.1 Button Description Rise the top cover of the host, and you can see the buttons and nixie tube. You can control the barrier gate via the buttons and judge the status via the nixie tube. There is respective initial status for the rising limit position, falling limit position, and rising speed of the barrier gate. You can adjust them via buttons if the initial status cannot meet the requirements of the installation site. Figure 3-1 Control Buttons Note ● If you need to hold the buttons to trigger operations, hold for 3 seconds or above. ● The nixie tube shows the status (e.g., H0) and fault codes (hexadecimal characters, e.g., 1A). If the fault codes appear on the nixie tube, it means there is operation error. Contact the technical personnel of our company to solve the problems.
Barrier Gate User Manual 43 3.2.2 Operation Procedure Refer to the table below for the description of the value on the nixie tube. Table 3-1 Nixie Tube Value Description Value Description H0 To enable manual learning. Refer to Set Manual Learning for details. H1 To adjust the rising/falling limit position of the boom pole. Refer to Adjust Rising Limit Position of Boom Pole/Adjust Falling Limit Position of Boom Pole for details. H2 To adjust the rising speed of the boom pole. Refer to Adjust Rising Speed of Boom Pole for details. H3 To adjust the falling speed of the boom pole. Refer to Adjust Falling Speed of Boom Pole for details. H4 To set the remote controller learning. Refer to Set Remote Controller Learning for details. H5 To set the vehicle queue mode. Refer to Set Vehicle Queue Mode for details. H6 To enable the auto falling function of boom pole. Refer to Enable Auto Falling of Boom Pole for details. H7 To set the auto falling time of boom pole. Refer to Set Auto Falling Time of Boom Pole for details. H8 To enable the function of locking barrier gate via the remote controller. Refer to Enable Locking Barrier Gate via Remote Controller for details. H9 To set the rising limit output mode. Refer to Set Rising Limit Output Mode for details. HA To set boom pole running direction after power shutdown. HB To set boom pole type. Set Manual Learning Steps 1. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. 2. Hold the Learn button on the control board until “H0” appears on the nixie tube. 3. Hold the Learn button again on the control board until “Lr” appears on the nixie tube. The device enters into the limit position learning mode. 4. After the learning process completes, “00” will appear on the nixie tube to switch to the normal running status.
Barrier Gate User Manual 44Lr 00 Learning completed. Rising Limit Position H0 Hold the Learn button on the control board. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. Hold the Learn button on the control board. Figure 3-2 Set Manual Learning Adjust Rising Limit Position of Boom Pole Steps 1. Press the Rise button on the remote controller or press the Rise button on the control board to adjust the boom pole to the rising limit position. 2. Hold the Learn button on the control board until “H0” appears on the nixie tube. 3. Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. Adjust the value to “H1”. 4. Hold the Learn button on the control board until “OL” appears on the nixie tube. 5. Hold the Rise/Fall button on the control board to adjust the boom pole to the rising limit position. 6. Press the Learn button on the control board to save the settings. “H1” will appear on the nixie tube.
Barrier Gate User Manual 45Rising Limit Position Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. H1 OL Hold the Learn button on the control board. H1 Press the Learn button on the control board to save the settings. H0 Hold the Learn button on the control board. Hold the Rise/Fall button on the control board to adjust the boom pole to the rising limit position. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. Figure 3-3 Adjust Rising Limit Position of Boom Pole Adjust Falling Limit Position of Boom Pole Steps 1. Press the Fall button on the remote controller or press the Fall button on the control board to adjust the boom pole to the falling limit position. 2. Hold the Learn button on the control board until “H1” appears on the nixie tube. 3. Hold the Learn button on the control board until “CL” appears on the nixie tube. 4. Hold the Rise/Fall button on the control board to adjust the boom pole to the falling limit position. 5. Press the Learn button on the control board to save the settings. “H0” will appear on the nixie tube.
Barrier Gate User Manual 46Falling Limit Position H1 CL Hold the Learn button on the control board. H0 Press the Learn button on the control board to save the settings. Press the Fall button on the remote controller or press the Fall button on the control board to adjust the boom pole to the falling limit position. Hold the Rise/Fall button on the control board to adjust the boom pole to the falling limit position. Figure 3-4 Adjust Falling Limit Position of Boom Pole Adjust Rising Speed of Boom Pole Steps 1. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. 2. Hold the Learn button on the control board until “H0” appears on the nixie tube. 3. Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. Adjust the value to “H2”. 4. Hold the Learn button on the control board to enter the menu settings. 5. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. Note The L3 rising speed is faster than L2, which is faster than L1. Adjust the speed according to your needs. 6. Press the Learn button on the control board to save the settings. “H2” will appear on the nixie tube.
Barrier Gate User Manual 47Rising Limit Position Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. H2 L3 Hold the Learn button on the control board to enter the menu settings. H2 Press the Learn button on the control board to save the settings. H0 Hold the Learn button on the control board. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. The rising speed: L3 > L2 > L1 Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. Figure 3-5 Adjust Rising Speed of Boom Pole Adjust Falling Speed of Boom Pole Steps 1. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. 2. Hold the Learn button on the control board until “H0” appears on the nixie tube. 3. Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. Adjust the value to “H3”. 4. Hold the Learn button on the control board to enter the menu settings. 5. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. Note The L3 falling speed is faster than L2, which is faster than L1. Adjust the speed according to your needs. 6. Press the Learn button on the control board to save the settings. “H3” will appear on the nixie tube.
Barrier Gate User Manual 48Rising Limit Position Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. H3 L3 Hold the Learn button on the control board to enter the menu settings. H3 Press the Learn button on the control board to save the settings. H0 Hold the Learn button on the control board. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. The falling speed: L3 > L2 > L1 Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. Figure 3-6 Adjust Falling Speed of Boom Pole Set Remote Controller Learning Steps 1. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. 2. Hold the Learn button on the control board until “H0” appears on the nixie tube. 3. Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. Adjust the value to “H4”. 4. Hold the Learn button on the control board until “PA” appears on the nixie tube. 5. Press any button on the remote controller twice, and “00” will appear on the nixie tube. Learning completed. 6. (Optional) If you want to unpair the remote controller, hold the Stop button on the control board until “H4” appears on the nixie tube. 7. Press the Learn button on the control board to save the settings. “H4” will appear on the nixie tube.
Barrier Gate User Manual 49Rising Limit Position Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. H4 PA Hold the Learn button on the control board. 00 Press any button on the remote controller twice. H0 Hold the Learn button on the control board. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. Hold the Stop button on the control board to unpair the remote controller. H4 Learning completed. Unparing completed. Press the Learn button on the control board to save the settings. H4 Figure 3-7 Set Remote Controller Learning Set Vehicle Queue Mode Steps 1. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. 2. Hold the Learn button on the control board until “H0” appears on the nixie tube. 3. Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. Adjust the value to “H5”. 4. Hold the Learn button on the control board to enter the menu settings. 5. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. Note Adjust the value to 1 to enable the vehicle queue mode, and 0 to disable the mode. 6. Press the Learn button on the control board to save the settings. “H5” will appear on the nixie tube.
Barrier Gate User Manual 50Rising Limit Position Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. H5 1 Hold the Learn button on the control board to enter the menu settings. H5 Press the Learn button on the control board to save the settings. H0 Hold the Learn button on the control board. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. 1: Enable vehicle queue mode. 0: Disable vehicle queue mode. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. Figure 3-8 Set Vehicle Queue Mode Enable Auto Falling of Boom Pole Steps 1. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. 2. Hold the Learn button on the control board until “H0” appears on the nixie tube. 3. Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. Adjust the value to “H6”. 4. Hold the Learn button on the control board to enter the menu settings. 5. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. Note Adjust the value to 1 to enable the auto falling function, and 0 to disable the function. 6. Press the Learn button on the control board to save the settings. “H6” will appear on the nixie tube.
Barrier Gate User Manual 51Rising Limit Position Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. H6 1 Hold the Learn button on the control board to enter the menu settings. H6 Press the Learn button on the control board to save the settings. H0 Hold the Learn button on the control board. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. 1: Enable auto falling function. 0: Disable auto falling function. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. Figure 3-9 Enable Auto Falling of Boom Pole Set Auto Falling Time of Boom Pole Steps 1. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. 2. Hold the Learn button on the control board until “H0” appears on the nixie tube. 3. Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. Adjust the value to “H7”. 4. Hold the Learn button on the control board to enter the menu settings. 5. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. Note The actual auto falling time of the boom pole after the vehicle passes = the value shown on the nixie tube × 10 s. E.g., the value shown on the nixie tube is 3. Thus the actual auto falling time is 30 s. 6. Press the Learn button on the control board to save the settings. “H7” will appear on the nixie tube.
Barrier Gate User Manual 52Rising Limit Position Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. H7 03 Hold the Learn button on the control board to enter the menu settings. H7 Press the Learn button on the control board to save the settings. H0 Hold the Learn button on the control board. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. The actual auto falling time of the boom pole after the vehicle passes = the value shown on the nixie tube × 10 s. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. Figure 3-10 Set Auto Falling Time of Boom Pole Enable Locking Barrier Gate via Remote Controller Steps 1. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. 2. Hold the Learn button on the control board until “H0” appears on the nixie tube. 3. Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. Adjust the value to “H8”. 4. Hold the Learn button on the control board to enter the menu settings. 5. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. Note Adjust the value to 1 to enable locking barrier gate via the remote controller, and 0 to disable the function. 6. Press the Learn button on the control board to save the settings. “H8” will appear on the nixie tube.
Barrier Gate User Manual 53Rising Limit Position Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. H8 1 Hold the Learn button on the control board to enter the menu settings. H8 Press the Learn button on the control board to save the settings. H0 Hold the Learn button on the control board. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. 1: Enable locking barrier gate via the remote controller. 0: Disable locking barrier gate via the remote controller. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. Figure 3-11 Enable Locking Barrier Gate via Remote Controller Lock Barrier Gate Lock the barrier gate via the remote controller. Press the Rise, Stop, and Rise buttons on the remote controller in sequence until “Lc” appears on the nixie tube. Set Rising Limit Output Mode Steps 1. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. 2. Hold the Learn button on the control board until “H0” appears on the nixie tube. 3. Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. Adjust the value to “H9”. 4. Hold the Learn button on the control board to enter the menu settings. 5. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. Note Adjust the value to 1 to enable outputting the rising pulse after the boom pole rises to the rising limit position, and 0 to disable the function. 6. Press the Learn button on the control board to save the settings. “H9” will appear on the nixie tube.
Barrier Gate User Manual 54Rising Limit Position Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. H9 1 Hold the Learn button on the control board to enter the menu settings. H9 Press the Learn button on the control board to save the settings. H0 Hold the Learn button on the control board. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. 1: Enable outputting the rising pulse after the boom pole rises to the rising limit position. 0: Disable the function. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. Figure 3-12 Set Rising Limit Output Mode Set Boom Pole Running Direction after Power Shutdown Steps 1. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. 2. Hold the Learn button on the control board until “H0” appears on the nixie tube. 3. Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. Adjust the value to “HA”. 4. Hold the Learn button on the control board to enter the menu settings. 5. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. Note Adjust the value to 1 to enable the boom pole to rise to the rising limit position after the power shutdown, and 0 to enable the boom pole to fall to the falling limit position after the power shutdown. 6. Press the Learn button on the control board to save the settings. “HA” will appear on the nixie tube.
Barrier Gate User Manual 55Rising Limit Position Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. HA 1 Hold the Learn button on the control board to enter the menu settings. HA Press the Learn button on the control board to save the settings. H0 Hold the Learn button on the control board. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. 1: Enable the boom pole to open to the rising limit position after the power shutdown. 0: Enable the boom pole to close to the falling limit position after the power shutdown. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. Figure 3-13 Set Boom Pole Running Direction after Power Shutdown Set Boom Pole Type Steps 1. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. 2. Hold the Learn button on the control board until “H0” appears on the nixie tube. 3. Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. Adjust the value to “Hb”. 4. Hold the Learn button on the control board to enter the menu settings. 5. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. Note Refer to Table 3-2 for the value description. 6. Press the Learn button on the control board to save the settings. “Hb” will appear on the nixie tube. Table 3-2 Boom Pole Type Value Description Value Boom Pole Type 2 2 m straight boom pole 3 3 m straight boom pole
Barrier Gate User Manual 56 Value Boom Pole Type 4 4 m straight boom pole 5 5 m straight boom pole 6 6 m straight boom pole 3F 3 m fence boom pole 4F 4 m fence boom pole 5F 5 m fence boom pole 3C 3 m folding boom pole 4C 4 m folding boom pole 5C 5 m folding boom pole 3L 3 m boom pole with strip light 4L 4 m boom pole with strip light 4E 4 m octagonal telescopic boom pole 5E 5 m octagonal telescopic boom pole 6E 6 m octagonal telescopic boom poleRising Limit Position Press the Rise/Fall button on the control board to increase/decrease the value on the nixie tube. Hb 5F Hold the Learn button on the control board to enter the menu settings. Hb Press the Learn button on the control board to save the settings. H0 Hold the Learn button on the control board. Press the Rise/Fall button on the control board to adjust the value on the nixie tube. Press the Rise button on the remote controller, press the Rise button on the control board, or power on the device to adjust the boom pole to the rising limit position. Figure 3-14 Set Boom Pole Type
Barrier Gate User Manual 57 Chapter 4 Maintenance 4.1 Adjust Boom Pole Balance Adjust the balance of the boom pole. Steps 1. Cut off the power supply. Rotate the hand wheel of the machine core to raise the boom pole to the position where the angle between the boom pole and the ground surface is 20° ± 5°. 2. Release the hand wheel to check if the boom pole can return to the position where the angle between the boom pole and the ground surface is 60° ± 15° naturally. Figure 4-1 Adjust Boom Pole Balance 4.2 Change Boom Pole Caution Contact the professional technical personnel to change the boom pole. You may damage the barrier gate if you change it by yourself. Before you start Adjust the boom pole to the rising limit position, and then cut off the power supply. Steps 1. Unscrew the cap nuts, spring washers, and flat washers on the other sides of the four assembling bolts. Save the components and parts for the following installations.
Barrier Gate User Manual 58 2. Disassemble the boom pole and chuck. 3. Repeat the boom pole installation procedure to install a new boom pole. Figure 4-2 Change Boom Pole 4.3 Change Spindle Rod and Spring 4.3.1 Spring and Spindle Rod Specifications If you need to change the boom pole, prepare the corresponding springs and spindle rods according to the boom pole types. Refer to the table below for details. Table 4-1 Spring and Spindle Rod Specifications Boom Pole Type Spring Spindle Rod 2 m small octagonal boom pole Spring with green hook × 1 Small octagonal boom pole spindle rod 3 m small octagonal boom pole Spring with white hook × 1 Small octagonal boom pole spindle rod 4 m small octagonal boom pole Spring with white hook × 1 Small octagonal boom pole spindle rod 5 m large octagonal boom pole Spring with white hook × 2 Large octagonal boom pole spindle rod
Barrier Gate User Manual 59 4.3.2 Change Spindle Rod Before you start Adjust the boom pole to the rising limit position, and then cut off the power supply. Steps 1. Unscrew the cap nuts, spring washers, and flat washers on the other sides of the four 6 m large octagonal boom pole Spring with white hook × 1 Spring with red hook × 1 Large octagonal boom pole spindle rod 1.5 m + 1.5 m folding boom pole Spring with white hook × 1 Small octagonal boom pole spindle rod 2 m + 2 m folding boom pole Spring with green hook × 1 Spring with white hook × 1 Small octagonal boom pole spindle rod 2.5 m + 2.5 m folding boom pole Spring with white hook × 2 Small octagonal boom pole spindle rod 3 m fence boom pole Spring with white hook × 2 Large octagonal boom pole spindle rod 4 m fence boom pole Spring with white hook × 1 Spring with red hook × 1 Large octagonal boom pole spindle rod 5 m fence boom pole Spring with red hook × 2 Large octagonal boom pole spindle rod 2 m anti-collision cylinder boom pole Spring with green hook × 1 Anti-collision round boom pole spindle rod 3 m anti-collision cylinder boom pole Spring with white hook × 1 Anti-collision round boom pole spindle rod 4 m anti-collision cylinder boom pole Spring with green hook × 1 Spring with white hook × 1 Anti-collision round boom pole spindle rod 6 m boom pole with strip light Spring with red hook × 1 Spring with white hook × 1 Spindle rod for boom pole with strip light 4 m boom pole with strip light Spring with green hook × 1 Spring with white hook × 1 Spindle rod for boom pole with strip light 3 m boom pole with strip light Spring with green hook × 1 Spindle rod for boom pole with strip light
Barrier Gate User Manual 60 assembling bolts. Save the components and parts for the following installations. 2. Disassemble the boom pole and chuck. Figure 4-3 Disassemble Boom Pole and Chuck 3. Unscrew the M12 fixing bolt of the spindle rod anticlockwise with a 10 mm hex wrench, and disassemble the bolt. Figure 4-4 Disassemble Bolt 4. Loosen the barrier gate control box captive screw with the screwdriver, and then rotate the control box (more than 160°). 5. Loosen the M8 × 20 hex socket head cap screw and M8 nut on the side of the spindle rod with a No. 6 hex wrench and an adjustable wrench.
Barrier Gate User Manual 61 Figure 4-5 Disassemble Control Box 6. Disassemble the spindle rod and change a new one. Install the M12 fixing bolt of the spindle rod, and fasten it with a torque no smaller than 60 NM. Figure 4-6 Change Spindle Rod 7. Fix the M8 × 20 hex socket head cap screw and M8 nut on the side of the spindle rod, rotate the control box to the original position, and tighten the captive screw with the screwdriver. Figure 4-7 Reinstall Control Box 8. Repeat the boom pole installation procedure to install a new boom pole. 4.3.3 Change Spring Before you start Adjust the boom pole to the rising limit position, and then cut off the power supply.
Barrier Gate User Manual 62 Steps 1. Close the cotter pin openings with needle-nose pliers. Figure 4-8 Close Cotter Pin Openings 2. Pull the cotter pins out with needle-nose pliers. Figure 4-9 Pull Cotter Pins Out
Barrier Gate User Manual 63 3. Hold the upper screw weld nuts with an adjustable wrench, and then unscrew the two bottom lock nuts with another adjustable wrench. Figure 4-10 Unscrew Lock Nut 4. Adjust the boom pole of the barrier gate to the falling status to keep the three points shown in the figure below in a straight line, and then the spring and spring shaft are lifted. Figure 4-11 Close Boom Pole 5. Hold the spring hook to pull up the spring, and then change a new spring.
Barrier Gate User Manual 64 Figure 4-12 Change Spring 6. Install the new spring according to the steps above reversely. 4.4 Change Machine Core Before you start Cut off the power supply. Disassemble the boom pole and spindle rod according to the procedure above. Steps 1. Use a cross screwdriver to remove the grounding terminal of the motor wire, and then unplug the motor power cord and signal line terminals on the barrier gate control board. Rotate the control box, and remove the motor wire from the wire slot.
Barrier Gate User Manual 65 Figure 4-13 Remove Motor Wire 2. Remove the M8 hex socket head cap screws of the machine core with a No. 6 hex wrench. 3. Disassemble the machine core and change a new one. 4. Fix the machine core with the M8 hex socket head cap screws, put motor wire into the wire slot, connect the power cord and signal line terminals, and then fix the grounding terminal. Figure 4-14 Fix Machine Core 5. Install the boom pole. Refer to 4.2 Change Boom Pole for details. 6. Install the spindle rod. Refer to 4.3.2 Change Spindle Rod for details. 4.5 Left/Right Direction of Boom Pole The boom pole direction depends on the driving direction of the vehicle. When you look from the driving direction as shown below, the left boom pole is the one that the boom pole is on the left of the barrier gate host, and the right boom pole is the one that the boom pole is on the right of the barrier gate host.
Barrier Gate User Manual 66 Figure 4-15 Boom Pole Direction Instruction
Barrier Gate User Manual 67 4.6 Change Left/Right Direction of Machine Core Before you start Cut off the power supply. Disassemble the boom pole and spindle rod according to the procedure above. Steps 1. Use a cross screwdriver to remove the grounding terminal of the motor wire, and then unplug the motor power cord and signal line terminals on the barrier gate control board. Rotate the control box, and remove the motor wire from the wire slot. Figure 4-16 Remove Machine Core Wire 2. Remove the M8 hex socket head cap screw of the machine core with a No. 6 hex wrench. 3. Rotate the machine core 180° horizontally, and then put it into the host. Note The installation position is different after direction is changed.
Barrier Gate User Manual 68 Figure 4-17 Change Machine Core Direction 4. Fix the machine core with the M8 hex socket head cap screws, put motor wire into the wire slot, connect the power cord and signal line terminals, and then fix the grounding terminal. Figure 4-18 Fix Machine Core 5. Install the boom pole. Refer to 4.2 Change Boom Pole for details. 6. Install the spindle rod. Refer to 4.3.2 Change Spindle Rod for details.
Barrier Gate User Manual 69 A. FAQ When the barrier gate is abnormal, open the top cover, and observe the fault code on the nixie tube to troubleshoot. No. Code Description 1 01 ● The barrier gate was hit. ● The boom pole does not match. ● The control box was damaged.2 02 3 03 ● The boom pole was blocked from falling by obstacles. Remove them. ● The spring is too tightened. ● The boom pole does not match. ● Learning limit positions failed. Learn again. 4 04 ● There are obstacles on the boom pole or the connection components. Remove them. ● The spring has reached the inner wall of the host in compression status. Adjust the spring. ● The boom pole does not match. ● The gearbox was damaged. ● The control box was damaged. 5 05 ● The cables of encoder or motor were not connected well. ● The boom pole or the connection component got stuck. ● The motor was damaged. ● The gearbox was damaged. ● The control box was damaged 6 06 ● The power input is abnormal. ● The power output of the transformer is abnormal. ● The braking resistor was not inserted. ● The control box was damaged. 7 07 ● The power input is abnormal. ● The power output of transformer is abnormal. ● The control box was damaged. 8 0d ● The gearbox was damaged. ● The encoder was interfered. ● The boom pole was damaged. 9 0E The radar, vehicle detector, or protection signal was triggered during learning. 10 10 The stopping control or stopping via hand shank terminal was short-circuited. 11 11 The stopping control or falling via hand shank terminal was
Barrier Gate User Manual 70 No. Code Description short-circuited. 12 15 FOC timeout. 13 16 The software is abnormal. 14 17 ● The braking resistor was damaged or not inserted firmly. ● The control box was damaged. 15 18 The signal cable was not connected well. 16 64 If the device fail to rise to the limit position, but the motor is running well, the system will reboot if it receives the rise command. 17 65 If the device fail to fall to the limit position, but the motor is running well, the system will reboot if it receives the rise command. 18 66 Learning failed. The system will reboot if it receives the rise command. 19 68 The motor wiring was not connected well. 20 69 FLASH is abnormal. 21 Lc The barrier gate is locked. Check if the rising control + and rising control - interfaces are connected or if the barrier gate is locked via remote controller. 22 Lr The barrier gate is in learning limit process, finish it first.
Barrier Gate User Manual 71 B. Peripheral Device Interfaces Introduction Open the top cover of host, and you can see the interfaces as shown below. Figure B-1 Interfaces Table B-1 Interface Description Name Description Max. Voltage Max. Current Red Light Connects to the red traffic signal light. AC 240 V/ DC 100 V 2 A Green Light Connects to the green traffic signal light. Rising Control + Connects to control signals (relay) to execute rising, falling, and stopping command. DC 12 V / Rising Control - Falling Control + Falling Control - Stopping Control + Stopping Control - Rise via Hand Shank Connects to hand shank control tool to control the boom pole to rise, fall, and stop remotely. DC 12 V / Fall via Hand Shank Stop via Hand Shank +5V/GND Hand shank power supply. / /
Barrier Gate User Manual 72 Name Description Max. Voltage Max. Current 5V Connects to the remote receiving module. / / RS485-A2 RS485-B2 GND RS485-A Inputs RS-485 control signals. A connects to RS-485 +, and B connects to RS-485 -. RS485-B GND +12V Connects to 12 V power supply. GND GND Rising Limit Output + ● The alarm output of exceptional rising of the boom pole. ● Relay signals to output the rising status of the boom pole to detection unit. DC 24 V 1 A Rising Limit Output + Falling Limit Output + Relay signals to output the falling status of the boom pole to the detection unit.Falling Limit Output - 12V_IN Connects to power input. DC 12 V 1 A LED-ARR2 Connects to the negative pole of LED strip light, displaying green. LED-ARR1 Connects to the negative pole of LED strip light, displaying red. 12V_OUT Connects to the positive pole of LED strip light. GND GND Induction Input + Connect to anti-fall device (anti- fall radar or anti-fall coil). The pole will fall automatically if the signal disappears. DC 12 V / Induction Input - Protection Input + Connect to anti-fall device (anti- fall radar or anti-fall coil).Protection Input - Network Interface Reserved interfaces. / /
Barrier Gate User Manual 73 Name Description Max. Voltage Max. Current Bollard Control 1 + Reserved interfaces. DC 24 V 1 A Bollard Control 1 - Bollard Control 2 + Bollard Control 2 - Alarm Input 1 + DC 12 V / Alarm Input 1 - Alarm Input 2 + Alarm Input 2 -
UD28917B-D